WILTEC 62367 Log Jack Timber Jack 130cm for Trunks up to Ø35cm Levering User Manual
- June 5, 2024
- wiltec
Table of Contents
WILTEC 62367 Log Jack Timber Jack 130cm for Trunks up to Ø35cm Levering
User Manual
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical
data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities,
please contact us
The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via: https://www.wiltec.de/docsearch
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury
we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you
have understood its content.
Keep these operation instructions safe.
Warning: Carefully read the information and instructions stated within this operation manual and make sure to familiarise yourself with the tool, its functions, and handling before it is used. Non-compliance to the instructions given within this manual may lead to severe injuries and property damage.
Note that this operation manual cannot possibly cover all the potential scenarios that could occur while working with the tool. Therefore, make sure to be careful and attentive and to use it with discernment.
Safety instructions
General safety instructions
- This tool must not be used by individuals with reduced physical, sensory, or mental capabilities, or lack of experience and/or knowledge.
- This tool can only be used by individuals that are familiar with the tool as well as the information and instructions found within this operation manual.
- Children are not allowed to use the tool and must be always supervised to ensure that they do not play with it.
- Do not modify the tool. Unauthorised modifications can impair the safety, functionality, and service life of the tool.
- Always use tools appropriate for the task at hand. Further ensure to only use tools for the purpose they are intended for and at a speed that corresponds to their specifications.
Workplace safety
- Always make sure to keep your work area dry, clean, and well-lit. Wet, cluttered or insufficiently lit work areas increase the risk of accidents.
- Ensure that your work area offers enough space to grant a sufficiently safe distance from cutting tools.
- Keep bystanders out of the work area while using the tool as distractions may lead to carelessness and cause severe injuries.
Personal safety
- Always stay vigilant while using this tool and do not use it, if you are exhausted, tired, or under the influence of alcohol, drugs, or medicine.
- Do not wear lose clothes or accessories that may be gripped by moving parts. Tie long hair up or cover it with a snood-type cap to avoid severe injuries.
- Always wear appropriate safety equipment consisting of work gloves and non-skid safety shoes when working with this tool. It is further advised to wear a safety helmet, ear protection as well as authorised safety goggles, if saws and other tools are going to be used.
- Do not overestimate yourself and do not take unnecessary risks. Always make sure to have a secure foothold.
Technical specifications
Max. log diameter (㎝)
|
35
---|---
Tool length (㎝)
| 130
Lifting height (㎝)|
25
Dimensions (㎝)
| 130×25×41
Weight (㎏)|
4,54
Product Overview
Application and care
- Do not force the tool. Tools are safer and more efficient, if they are being used for their intended purposes and according to their specifications.
- Check the tool for damage or possible signs of wear before every use. Make thereby sure that the tool functions properly and can serve its purpose.
- Do not use the device, if it should be damaged. Make sure to replace damaged parts with components of equal quality before using the device again.
- Always make sure that the safety devices of the tool are in pristine condition and do not use it, if its safety devices are not or only partially functional.
- When not in use, store the tool in a safe and dry location that is inaccessible to children.
- Only use suitable accessories authorised by the manufacturer and spare parts of equal quality.
- The load capacitance of the tool must not be exceeded.
- When lifting trunks, make sure not to move body parts beneath the log.
- Always keep the tool well maintained. Keep it clean and free from dirt, oil, grease and possible residual fluids.
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.
Customer Support
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>