TechPlay BH-T1 Stereo Built-In Speaker Instruction Manual

TechPlay BH-T1 Stereo Built-In Speaker Instruction Manual

REMOTE CONTROL

BATTERY INSTALLATION
THE INFRA-RED TRANSMITTER REQUIRES 1 PC CR2025 LITHUM BATTERY FOR OPERATION

BUTTON DESCRIPTION

1. STANDBY: TRIGGER BETWEEN STANDBY MODE AND OPERATION MODE.
2. PRESET/ALBUM DN: PERFORM SAME FUNCTION AS “ALBUM DOWN / PRESET DOWN” KNOB ON THE UNIT.
3. PRESET/ALBUM UP: PERFORM SAME FUNCTION AS “ALBUM UP / PRESET UP” KNOB ON THE UNIT.
4. ALARM / SLEEP: PERFORM SAME FUNCTION AS “ALARM / SLEEP” BUTTON ON THE UNIT.
5. MUTE: TO MUTE AUDIO PLAYBACK.
6. OP/CL & SNOOZE: OPEN AND CLOSE THE CD DOOR; SNOOZE FUNCTION FOR ALARM.
7. REC/DEL: PERFORM SAME FUNCTION AS “REC/DEL” BUTTON ON THE UNIT.
8. FM ST.: SELECT BETWEEN FM STEREO AND MONO RADIO
9. SOURCE: SELECT FUNCTION BETWEEN CD/USB/RADIO/AUX/CASSETTE/BLUETOOTH.
10. MODE/CLOCK: PERFORM SAME FUNCTION AS “MODE/CLOCK” BUTTON ON THE UNIT.
11. ▶Ⅱ (PLAY/PAUSE): PERFORM SAME FUNCTION AS “▶Ⅱ PLAY/PAUSE” BUTTON ON THE UNIT.
12. ⬛(STOP)/BAND: PERFORM SAME FUNCTION AS ” ⬛ STOP” BUTTON ON THE UNIT. IT CAN SWITCH BETWEEN FM AND AM BAND DURING RADIO MODE.
13. (SKIP DOWN ): PERFORM SAME FUNCTION AS ” SKIP DOWN” BUTTON ON THE UNIT. BESIDES, IT CAN BE USED FOR RADIO FREQUENCY SEARCHING DURING RADIO MODE.
14. (SKIP UP ): PERFORM SAME FUNCTION AS ” SKIP UP” BUTTON ON THE UNIT. BESIDES, IT CAN BE USED FOR RADIO FREQUENCY SEARCHING DURING RADIO MODE.
15. VOLUME +/- : CONTROL VOLUME LEVEL.

PRODUCT FEATURES

• 80’s GHETTOR CD/MP3/BT PLAYER
• SLOT-IN PROGRAMMABLE CD/MP3 PLAYER
• BT WIRELESS MUSIC STREAMING
• USB SLOT FOR MP3 PLAYBACK
• CASSETTE PLAYER WITH PLAY / RECORD / PAUSE / FAST-FORWARD / REWIND / STOP
• PLL FM/AM RADIO
• LCD WITH BACK LIGHT – USE RECORDING FROM CASSETTE / CD / FM RADIO / AUX IN TO USE DEVICE DIRECTLY
• BUILT-IN STEREO SPEAKER – REMOTE CONTROL AND EXTERNAL POWER ADAPTOR INCLUDED
• RECHARGEABLE BUILT-IN BATTERY

LOCATION OF CONTROL

1. CD PLAYER
2. HANDLE
3. CD OUT
4. USB SLOT
5. REC/DEL
6. MODE/CLOCK
7. PLAY/PAUSE & SCAN
8. STOP
9. SKIP DOWN
10. SKIP UP
11. TUNER BAND
12. SPEAKER
13. REMOTE CONTROL RECEIVER
14. STANDBY INDICATOR
15. LCD DISPLAY
16. STANDBY / VOLUME KNOB
17. MAIN UNIT
18. ALBUM / PRESET UP & DOWN
19. SPEAKER
20. EARPHONE JACK
21. AUX IN JACK
22. SOURCE
23. MUSIC TONE-BASS
24. MUSIC TONE-TREBLE
25. SPEAKER
26. CASSETTE PLAYER
27. CASSETTE ­ RECORD
28. CASSETTE ­ PLAY
29. CASSETTE ­ FAST REWIND
30. CASSETTE ­ FAST FORWARD
31. CASSETTE ­ STOP / EJECT
32. CASSETTE ­ PAUSE
33. SPEAKER
34. MICROPHONE INPUT 2
35. MICROPHONE INPUT 1
36. ALARM/SLEEP
37. MIC VOLUME
38. MIC ECHO
39. TELESCOPIC ANTENNA
40. BATTERY COMPARTMENT
41. EXTERNAL POWER ADAPTOR JACK
42. SWITCH FOR RECHARGEABLE BUILT-IN BATTERY

CAUTION:
– USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
– THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
– IF YOU FIND ANY MALFUNCTION OR FREZZING OF THE UNIT DURING OPERATION, PLEASE TRY TO
UNPLUG THE UNIT AND WAIT FOR 10 SECONDS. THEN PLUG THE UNIT AND RESTART AGAIN

WARNING:
– THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
– BATTERIES (BATTERY PACK OR BATTERIES INSTALLED) SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.

PRECAUTIONS FOR USE
INSTALLATION

• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.

• CONNECT THE EXTERNAL POWER ADAPTOR WITH EXTERNAL POWER ADAPTOR JACK.

• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
  ALL OTHER CONNECTIONS HAVE BEEN MADE.

• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
  AROUND THE UNIT FOR VENTILATION.

• PUSH THE STANDBY KNOB TO SWITCH ON THE UNIT, STANDBY INDICATOR WILL BE OFF.

SETTING THE CLOCK

1. WHEN THE STANDBY INDICATOR (RED COLOR) LIGHT UP, UNIT IS IN THE STANDBY MODE.
2. DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS AND HOLD MODE BUTTON FOR 3-5 SECONDS, 12H / 24H WILL BE FLASHING. PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT 12H / 24H MODE. PRESS MODE BUTTON AGAIN TO CONFIRM.
3. SETTING HOUR: PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR, THEN PRESS MODE BUTTON AGAIN TO CONFIRM.
4. SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE CORRECT MINUTE, THEN PRESS MODE BUTTON AGAIN TO CONFIRM.

SETTING ALARM

1. DURING STANDBY MODE, HOLD ALARM BUTTON FOR 3-5 SECONDS. SETTING ALARM SEQUENCE IS “ALARM ON TIME > ALARM OFF TIME > ALARM MODE > ALARM VOLUME”.
2. SETTING ALARM ON TIME: “ON” IS LIGHTING ON THE DISPLAY
3. SETTING HOUR: PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR, THEN PRESS ALARM BUTTON AGAIN TO CONFIRM.
4. SETTING MINUTE: T PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE CORRECT MINUTE, THEN PRESS ALARM BUTTON AGAIN TO CONFIRM.
5. SETTING ALARM OFF TIME: “OFF” IS LIGHTING ON THE DISPLAY:
6. SETTING HOUR: PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR, THEN PRESS ALARM BUTTON AGAIN TO CONFIRM.
7. SETTING MINUTE: PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE CORRECT MINUTE, THEN PRESS ALARM BUTTON AGAIN TO CONFIRM.
8. SETTING ALARM MODE: “TUNE” IS LIGHTING UP ON THE DISPLAY:
9. PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE ALARM MODE.
10. SEQUENCE IS TUNE > CD > USB, PRESS ALARM BUTTON AGAIN TO CONFIRM.
11. SETTING ALARM VOLUME: “V – ” IS LIGHTING UP ON THE DISPLAY:
12. PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE ALARM VOLUME, PRESS ALARM BUTTON AGAIN TO CONFIRM.
13. SETTING ALARM IS COMPLETED, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR USER’S CHECKING
14. “CLOCK” ICON IS FLASHING WHEN ALARM IS IN ACTIVE. “CLOCK” ICON LIGHTS UP WHEN ALARM IS SETTING IS STORED BUT NOT IN ACTIVE YET.
15. CANCEL ALARM: DURING STANDBY MODE, WHEN “CLOCK” ICON IS ON, PRESS ALARM, “CLOCK” ICON WILL BE OFF.

SNOOZE FUNCTION
PRESS “SNOOZE” BUTTON ON THE REMOTE CONTROL WHEN ALARM IN ACTIVE, ALARM WILL BE SLIENT FOR 10 MINUTES. AFTER 9-10 MINUTUE SNOOZE INTERVAL, ALARM WILL BE ACTIVE AGAIN. SNOOZE CAN BE USED FOR REPEATEDLY WITHIN THE 1-HOUR ALARM ACTIVE INTERVAL.
TIMER FUNCTION

1. PUSH THE POWER KNOB TILL THE STANDBY INDICATOR (RED COLOR) LIGHT OFF. UNIT IS TURNING FROM STANDBY MODE TO OPERATION MODE.
2. WHEN THE UNIT IS TURNED ON, PRESS SLEEP BUTTON REPEATEDLY TO CHOOSE THE SLEEP TIME MINUTES FROM 90>80>70…..>10 OFF.
3. SLEEP TIME SETTING IS STORED WHEN THE “SLEEP” ICON LIGHTS UP ON THE DISPLAY.
4. WHEN THE SLEEP TIME MINUTES IS OVER, UNIT WILL BE SWITCHED TO STANDBY MODE
   AUTOMATICALLY.

LISTENING TO FM RADIO

FM/AM RADIO TUNING

1. PRESS TUNER/BAND BUTTON (OR FUNCT BUTTON REPEATEDLY ON THE REMOTE CONTROL) TO ACTIVATE TUNER MODE.
2. PRESS TUNER/BAND BUTTON AGAIN (OR ■ (STOP)/BAND ON THE REMOTE CONTROL) TO SWITCH BETWEEN FM/AM BAND.
3. TUNE TO THE REQUIRED STATION BY PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON FOR 1-2 SECONDS, AND THEN RELEASE.
4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP WHEN A RADIO STATION IS FOUND.

MANUAL PRESET FM/AM RADIO STATIONS

1. WHEN THE DESIRED RADIO STATION IS FOUND, PRESS MODE BUTTON TILL LCD SHOWS “P-01”.

2. TURN PRESET UP & DOWN KNOB TO SELECT THE PROGRAM NUMBER FOR STORING THE DESIRED
   RADIO STATION.

3. PRESS MODE BUTTON AGAIN TO CONFIRM, PROGRAM NUMBER WILL STOP TO FLASH.

4. REPEAT STEP 2 & 3 UNTIL ALL DESIRED RADIO STATIONS IS BEING FOUND AND STORED

5. TURN PRESET UP & DOWN KNOB TO CHOOSE THE PRESET RADIO STATIONS.

6. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF
   DIFFERENT AREA AND COUNTRIES.

AUTO PRESET FM/AM RADIO STATIONS

1. DURING FM/AM RADIO MODE, PRESS THE PLAY/PAUSE ▶Ⅱ BUTTON, THE UNIT WILL AUTOMATICLLY SCAN THE RADIO FREQUENCY. WHEN THE CLEAR SIGNAL IS FOUND, IT WILL AUTOMATICALLY STORE THE RADIO STATION, STARTING FROM PROGRAM NUMBER 1 (P-01).
2. WHEN AUTO SCANNING COMPLETED, UNIT WILL START TO PLAY FROM P-01.
3. TURN PRESET UP & DOWN KNOB TO CHOOSE THE PRESET RADIO STATIONS.
4. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF DIFFERENT AREA AND COUNTRIES.

FM & FM-STEREO RECEPTION

• PRESS FM ST. BUTTON (ON REMOTE CONTROL) TO SELTECT FM MONO OR FM STEREO MODE. WHEN STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
• “ST” ICON LIGHT UP ON THE DISPLAY TO SHOW FM STEREO MODE IS RECEIVING.

HINTS FOR BETTER RECEPTION
FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.

FM RADIO ENCODING

1. PRESS TUNER BUTTON TO ACTIVATE “TUNE” MODE AND SELECT FM RADIO.
2. INSERT USB MEMORY DEVICE
3. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
4. TO FINISH ENCODING, PRESS STOP ◼BUTTON AND DISPLAY WILL SHOW “END” AND RETURN TO TUNER MODE.

REMARK:
– THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF FM OR FM-ST RADIO
– THE RECORDING FORMAT IS PRESET AT ­ MP3 BIT RATE : 128 KBPS
– DURING FM & FM-STEREO RADIO ENCODING, RADIO FREQEUNCY IS FXIED AND CANNOT BE TUNED

CASSETTE TAPE & RECORDING
STOP / EJECT: PRESS TO STOP ALL DECK OPERATION. PRESS AGAIN TO OPEN THE CASSETTE DOOR.
FAST FORWARD: PRESS TO START, FAST FORWARD WINDING THE TAPE.
FAST REWIND: PRESS TO START, FAST REWIND WINDING THE TAPE.
PLAY: PRESS TO START PLAYING TAPE.
PAUSE: PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO RESUME PLAYBACK.
RECORD: PRESS TOGETHER WITH PLAY BUTTON TO START TAPE RECORDING.

PLAYBACK
– PRESS SOURCE BUTTON TO SELECT “TAPE” ON DISPLAY.
– PUT IN CASSETTE TAPE.
– PRESS PLAY BUTTON ON CASSETTE DECK TO START PLAYBACK.
– USE PAUSE BUTTON WHEN YOU WANT TO STOP PLACKBACK TEMPORARILY.
– PRESS STOP / EJECT BUTTON WHEN FINISHED.

RECORDING
A.RECORDING FROM CD / AUX / RADIO / USB / BT
– PRESS SOURCE BUTTON TO SELECT THE DESIRED MODE (CD / AUX / RADIO / USB / BT).
– PRESS RECORD AND PLAY BUTTON TOGETHER, THEN SIGNEL FROM DESIRED MODE WILL BE RECORDED IN CASSETTE.

B.CASSETTE TAPE RECORDING TO USB

1. PRESS SOURCE BUTTON REPEATEDLY TO ACTIVATE CASSETTE MODE
2. INSERT USB MEMORY DEVICE
3. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
4. TO FINISH ENCODING, PRESS STOP ◼BUTTON AND DISPLAY WILL SHOW “END” AND RETURN TO TAPE MODE.

REMARK:
– THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE TAPE.
– THE RECORDING FORMAT IS PRESET AT ­ MP3 BIT RATE : 128 KBPS

AUX IN JACK & ENCODING
PRESS SOURCE BUTTON REPEATEDLY TO SELECT AUX MODE, THEN CONNECT THE EXTERNAL AUDIO
DEVICE (SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE EXTERNAL AUDIO
DEVICE CAN BE PLAYED THROUGH THE SYSTEM.

AUX IN ENCODING

1. PRESS SOURCE BUTTON REPEATEDLY TO ACTIVATE AUX MODE
2. INSERT USB MEMORY DEVICE
3. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
4. TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW “END” AND RETURN TO
   TUNER MODE.

REMARK:
– THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE EXTERNAL
AUDIO DEVICE.
– THE RECORDING FORMAT IS PRESET AT ­ MP3 BIT RATE : 128 KBPS

PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA CONNECTING

THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY MEDIA WITH USB CONNECTING PORT.

1. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY IN THE DIRECTION OF THE ARROW, INSERT STRAIGHT WITHOUT BENDING.

2. CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA (USB THUMB DRIVE). CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE CONNECTION.

3. PRESS SOURCE BUTTON REPEATEDLY TO SELECT USB MODE, THEN INSERT USB MEMORY DEVICE.

4. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER FUNCTION SELECTION, AND DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES (EG. 016).

5. THEN THE SYSTEM WILL START AUDIO PLAYBACK FROM DESRIED DEVICE (USB OR SD/MMC) AUTOMATICALLY.

• PLAY / PAUSE BUTTON ▶Ⅱ
  – PRESS THE “PLAY/PAUSE” ▶Ⅱ BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO CONTINUE.

• STOP BUTTON◼

• PRESS STOP ⬛ BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES. AND THEN USER CAN PRESS SKIP UP / SKIP DOWN BUTTON TO SELECT FILE FORWARD OR BACKWARD.

• SKIP UP / SKIP DOWN
  – DURING MP3/WMA PLAYBACK, PRESS SKIP UP BUTTON ONCE TO PLAY THE NEXT FILE. PRESS AND HOLD SKIP UP BUTTON CONTINUOUSLY TO SPEED UP SELECTING FORWARD.
  – DURING MP3/WMA PLAYBACK, PRESS SKIP DOWN BUTTON ONCE TO PLAY THE PREVIOUS FILE. PRESS AND HOLD SKIP DOWN BUTTON CONTINUOUSLY TO SPEED UP SELECTING BACKWARD.

• FOLDER SEARCHING
  TURN ALBUM DOWN & ALBUM UP KNOB TO SEARCH FOLDER (F-01) BACKWARD OR FORWARD.

• REPEAT FUNCTION
  DURING AUDIO PLAYBACK, PRESS MODE BUTTON ONCE, SINGLE TRACK WILL BE PLAYED REPEATEDLY. PRESS MODE BUTTON AGAIN, ALL TRACK IN USB WILL BE PLAYED REPEATEDLY.

REMARK
– IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT A MALFUNCTION OF THE SYSTEM.
– THERE ARE NUMEROUS USB DEVICE PRODUCERS. SOLUTION AND FORMAT ARE VARIABLE BETEEN EACH OTHER. THEREFORE, WE DO NOT GARANTTEE THIS UNIT CAN SUPPORT ALL USB DEVICE FROM EVERY BRAND.

TRACKS PROGRAMMING
UP TO 99 TRACKS CAN BE PROGRAMMED FOR MP3/WMA FILE AND PLAY IN ANY ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:

1. SET AT USB MODE, THEN PRESS STOP BUTTON.
2. PRESS MODE BUTTON, “MEM” WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP OR SKIP DOWN BUTTON. IF FOLDER SELECTION IS REQUIRED, TURNING ALBUM DOWN & ALBUM UP KNOB TO SEARCH FOLDER BACKWARD OR FORWARD.
4. PRESS MODE BUTTON TO CONFIRM AND STORE THE TRACK INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “PLAY/PAUSE” BUTTON TO PLAY THE TRACKS IN ASSIGNED ORDER.
7. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP BUTTON AGAIN TO CANCEL PROGRAMMING.

FILE DELETE FROM USB DRIVE

THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB DRIVE BY FOLLOWING:-

I) DELETE 1 TRACK

1. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS DURING THE PLAYBACK OF THE DESIRED TRACK, THEN “ONE” WILL BE FLASHING ON THE DISPLAY. PRESS DEL BUTTON AGAIN TO CONFIRM.
2. “DEL” WILL BE SHOWN ON THE DISPLAY.
3. “DEL” WILL DISAPPEAR ON THE DISPLAY, IT MEANS THE TRACK IS DELETED.

II) DELETE 1 FOLDER

1. INSERT THE USB STORAGE MEDIA, SET IN “USB” MODE & SET AT STOP MODE AFTER UNIT READING.
2. TURN ALBUM DOWN & UP KNOB TO SEARCH DESIRED FOLDER FOR DELETING.
3. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS, “DEL” WILL SHOW ON THE DISPLAY. PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT “DIR” ON THE DISPLAY. PRESS DEL BUTTON AGAIN TO CONFIRM.
4. “DEL” WILL BE SHOWN ON THE DISPLAY. AFTER “DEL” DISAPPEARS IT MEANS THE DESIRED FOLDER IS DELETED.

III) DELETE ALL TRACK

1. INSERT THE USB STORAGE MEDIA, SET IN “USB” MODE & SET AT STOP MODE AFTER UNIT READING.
2. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS, THEN “ONE” WLL BE FLASHING ON THE DISPLAY. PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT “ALL” ON THE DISPLAY. PRESS DEL BUTTON AGAIN TO CONFIRM.
3. USB ICON WILL BE FLASHING ON THE DISPLAY. DELETING IS PERFORMING NOW.
4. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED.

REMARK : ALL THE FILES INSIDE THE USB STORAGE MEDIA WILL BE DELETED COMPLETELY AFTER
CONFIRMING TO “DEL” BUTTON.

COMPACT DISC (CD) PLAYBACK & ENCODING

1. PRESS SOURCE BUTTON REPEATEDLY TO SELECT CD MODE.
2. PRESS CD DOOR BUTTON, CD DOOR WILL BE OPENED, PUT THE CD IN THE TRAY AND PRESS CD DOOR BUTTON AGAIN, CD DOOR WILL BE CLOSED.
3. THE SYSTEM WILL START READING THE CD: 8

• PLAY / PAUSE BUTTON ▶Ⅱ
  – PRESS THE PLAY/PAUSE ▶Ⅱ BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO CONTINUE.

• STOP BUTTON ⬛
  – PRESS THE STOP ⬛ BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE TOTAL NUMBER OF TRACKS. AND THEN USER CAN PRESS SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT TRACKS.

• SKIP UP / SKIP DOWN BUTTON
  – DURING CD PLAYBACK, PRESS SKIP UP BUTTON ONCE TO PLAY THE NEXT FILE. PRESS AND HOLD SKIP UP BUTTON CONTINUOUSLY TO SPEED UP SELECTING FORWARD
  – DURING CD PLAYBACK, PRESS SKIP DOWN BUTTON ONCE TO PLAY THE PREVIOUS FILE. TURN AND HOLD SKIP DOWN BUTTON CONTINUOUSLY TO SPEED UP SELECTING BACKWARD.

• FOLDER SEARCHING
  TURN ALBUM DOWN & UP KNOB TO SEARCH FOLDER BACKWARD OR FORWARD.

• REPEAT FUNCTION
  – DURING AUDIO PLAYBACK, PRESS MODE BUTTON ONCE, SINGLE TRACK WILL BE PLAYED REPEATEDLY. PRESS MODE BUTTON AGAIN, ALL TRACK IN USB WILL BE PLAYED REPEATEDLY.

TRACKS PROGRAMMING
UP TO 99 MP3 TRACKS & 20 CD AUDIO FORMAT TRACK CAN BE PROGRAMMED AND PLAYED IN ANY ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:

1. PRESS SOURCE BUTTON REPEATEDLY TO CD MODE AND AT STOP MODE
2. PRESS THE MODE BUTTON, “MEM” WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP OR SKIP DOWN BUTTON. FOR MP3/WMA DISC, TURNING ALBUM DOWN OR ALBUM UP KNOB TO SEARCH FOLDER BACKWARD OR FORWARD.
4. PRESS THE MODE BUTTON TO STORE THE TRACK INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE BUTTON TO PLAY THE TRACKS IN ASSIGNED ORDER.
7. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP BUTTON AGAIN TO CANCEL PROGRAMMING.

COPYING OF CD
THE SYSTEM ALLOWS YOU TO COPY THE TRACK FROM CD TO USB OR SD BY 1 TRACK, 1 FOLDER OR ALL FILES.

I) COPY

1. TRACK 1.INSERT THE USB STORAGE MEDIA, PRESS SOURCE BUTTON TO CD MODE.
2. PRESS REC BUTTON DURING THE PLAYBACK OF THE COPYING TRACK FROM CD, THEN “ONE” WILL BE FLASHING ON THE DISPLAY. PRESS REC BUTTON AGAIN TO CONFIRM.
3. THE USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
4. AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
5. DISPLAY WILL SHOW “END” AND BACK TO CD MODE.

II) COPY 1 FOLDER (FOR MP3/WMA DISC ONLY)

1. INSERT CD DISC, SET IN CD & STOP MODE AFTER UNIT READING.
2. TURN ALBUM DOWN & UP KNOB TO SEARCH FOLDER FOR COPYING.
3. PRESS REC BUTTON, THEN “ONE” WILL BE FLASHING ON THE DISPLAY. PRESS SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT “DIR” ON THE DISPLAY. PRESS REC BUTTON AGAIN TO CONFIRM.
4. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
5. WHEN THE USB CARD ICON STOPS FLASHING, IT MEANS THAT THE FOLDER COPYING IS COMPLETED.

III) COPY ALL TRACK

1. INSERT CD DISC, SET IN CD & STOP MODE AFTER UNIT READING.
2. PRESS REC BUTTON, THEN “ONE” WLL BE FLASHING ON THE DISPLAY. PRESS SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT “ALL” ON THE DISPLAY. PRESS REC BUTTON AGAIN TO CONFIRM.
3. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
4. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED.

SPLIT TRACK FUNCTION FOR USB/SD RECORDING FOR CASSETTTE/AUX IN

1. MANUAL SPLIT OPERATION PROCEDURE: DURING USB RECORDING, THE USB ICON WILL FLASH ON THE DISPLAY. IF A NEW TRACK IS REQUIRED, PRESS MODE BUTTON ON THE UNIT OR REMOTE CONTROL, DISPLAY WILL SHOW “TS”, THEN THE UNIT WILL STOP RECORDING MOMENTARILY AND RESUME AGAIN. A NEW FILE WILL HAVE BEEN CREATED ON THE USB DEVICE REPRESNTING A NEW TRACK.
2. AUTO SPLIT OPERATION PROCEDURE:
   – BEFORE USB RECORDING, SELECT AUDIO SOURCE, THEN PRESS MODE BUTTON ON THE UNIT OR REMOTE CONTROL, DISPLAY WILL SHOW “T-ON”, WHICH MEANS THE AUTO SPLIT FUNCTION HAS ACTIVATED. THEN START USB RECORDING, THE UNIT CAN AUTOMATICALLY DETECT THE SILENT PART BETWEEN EACH TRACK, AND CREATE A NEW FILE TO MOVE ON TO START RECORDING THE NEXT TRACK.
   – IF NOT REQUIRED: PRESS MODE BUTTON ON THE UNIT OR REMOTE CONTROL BEFORE USB RECORDING, DISPLAY WILL SHOW “T-OF”, WHICH MEANS AUTO SPLIT HAS BEEN DEACTIVATED.
   – PLEASE NOTE FOR AUTO SPLIT: SEVERAL SECONDS OF THE BEGINNING OF THE NEXT TRACK MAY NOT BE RECORDED, AS THE UNIT MAY TAKE A FEW SECONDS TO CREATE A NEW FILE ON THE USB; AND IT CAN ADDITIONALLY BE THE CASE THAT SOME MUSIC PRODUCERS INTENTIONALLY ADD SILENT SECTIONS WITHIN ONE TRACK. AS A RESULT, THIS WILL VERY LIKELY MAKE THE UNIT CONSIDERS THIS SILENT PART THE BREAK BETWEEN TRACKS AND CREATE A NEW TRACK ON THE RECORDING.
   – NOTE FOR AUTO SPLIT: DURING USB RECORDING FROM CASSETTE PLAYER, WHEN THE UNIT HAS DETECTED ANY PARTICULAR SILENT PART, THE CASSETTE PLAYER WILL STOP MOMENTARILY. THE CASSETTE PLAYER WILL RESUME OPERATION ONCE THE USB/SD DEVICE HAS BEGUN CREATING A NEW FILE TO BE RECORDED.

BLUETOOTOOTH CONNECTION

– PRESS SOURCE BUTTON REPEATEDLY TO SELECT BT MODE (BLUETOOTH), THEN THE
UNIT IS READY FOR CONNECTION WITH YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE).
– SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT “MONSTER S” BLUETOOTH EQUIPMENT FOR CONNECTION.
– AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT VIA BLUETOOTH, START TO PLAYBACK YOUR DEVICE.

MICROPHONE INPUT

– MICROPHONE INPUT X 2 ARE AVAIBALE FOR MICROPHONE JACK
– ECHO KNOB AND MICROPHONE VOLUME ARE USED TO CONTROL MICROHONE ECHO LEVEL AND VOLUME SEPARATELY.

BASS AND TREBLE CONTROL

– BASS KNOB AND TREBLE KNOB TO CONTROL THE BASS AND TREBLE LEVEL FOR MUSIC PLAYBACK

EARPHONE JACK

THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER / SPEAKER BY 3.5MM EARPHONE JACK.

POWER SAVING FEATURE:

TO SAVE ENERGY, IF THERE IS NO AUDIO SIGNAL FROM CD / CASSETTE / AUX IN / USB FOR A PERIOD OF OVER 10 MINUTES, THEN THE UNIT WILL AUTOMATICALLY SWITCH TO STANDBY MODE.

RECHARGEABLE BUILT-IN BATTERY

1. TAKE OUT THE BATTERY COVER, THERE IS SWITCH FOR RECHARGEABLE BUILT-IN BATTERY. SWITCH TO “ON” AND UNPLUG THE UNIT, WHICH WILL BE POWERED BY RECHARGEABLE BUILT-IN BATTERY
2. WHEN THE UNIT IS CONNECTED WITH AC POWER, THEN SWITCH TO “ON” OF THE SWITCH FOR RECHARGEABLE BUILT-IN BATTERY, THE BUILT-IN BATTERY WILL BE RECHAGING.

FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>