eve 20EBG8701 Water Guard Connected Detector User Guide
- June 5, 2024
- eve
Table of Contents
eve 20EBG8701 Water Guard Connected Detector
Get started
Plug Eve Water Guard into an electrical outlet and connect the supplied
sensing cable to the 3.5 mm 11/8″) socket on the bottom. The entire length of
the cable
serves as water detection sensor and is extendable !optional accessory).
Download the Eve app from the App Store.
Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process.
If you have already set up another accessory, go to Settings in Eve to add Eve Water Guard to your home.
Enjoy
Access Eve Water Guard using the Eve app, the Home app, and Siri
- View status
- Alarm Test
- Install firmware updates
- Review previous events
- Mute alarm
- View status
- Ask for status
- Configure notifications
- Configure guest access
To test the alarm, go to the Settings of Eve Water Guard, tap Alarm Test and follow the instructions in the app. Performing this test is recommended at least every three months.
If the sensing cable detects water, a loud alarm will sound and the LEDs will flash. Please use the Eve app to mute the alarm.
Securely access Eve Water Guard while you’re away from home and set up powerful automations. Any Apple TV HD, Apple TV 4K or HomePod using the same iCloud account as your iPhone will automatically serve as a home hub, no further setup required.
Eve is designed to safeguard your personal data. All data is fully encrypted and only transferred directly between your Eve Water Guard and iPhone, iPad or home hub. Learn more at evehome.com/privacy
Legal Information
FCC Rules
This device complies with part 15 of the FCC Rules and Industry Canada
licence-exempt ASS standard(s}. Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by one or more of
the following measures: reorient or relocate the receiving antenna; increase
the separation between the equipment and receiver; consult the dealer or an
experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This equipment complies with FCC RF, IC RSS-102 and CE radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters between the
radiator and your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by Eve Systems could void your
authority to operate this device.
For questions about compliance with FCC regulations, please contact:
Compliance Officer, Eve Systems, 100 Pine St., Suite 1250, San Francisco CA
94111, USA.
Hereby. Eve Systems declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EC.
The declaration of conformity is available at
www.evehome.com/doc
Purpose of control: operating control; construction of control: plug-in
operating control; type 1 action, operating time: continuous; control
pollution degree: 2; impulse voltage: 1500 V; frequency range: 2402 – 2480 MHz
(BLE) / 2405-2480 MHz (Thread); max. EIRP: 10 dBm; power consumption: active<
0.5 W, standby< 0.2 W
Product: 10EBG8701 • Model: 20EBG8701 • Part: 51EBZ8703
FCC ID: NE-WLS-002 • IC: 11192A-WLS002
Reset
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>