Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter User Manual

June 5, 2024
Shenzhen Leaderment Technology

unbreakable
#LifecycleValues]

Product Introduction

This Bluetooth FM transmitter, featuring an advanced Bluetooth chip, USB flash drive port, and dual USB charging ports (PD USB-C port and QC 3.0 port), lets you enjoy the music, fast charge your devices or be hand-free answer the call in the car. Meanwhile, it has the bass boost function providing bass music quality, detects and displays the car battery voltage, which brings you an intelligent experience.

Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter -
fig

Product Overview

  1. MIC
  2. PD USB-C Port
  3. QC3.0 Port
  4. LED Display
  5. USB Flash Drive Port (Up to 64G
  6. Multi-function Button
  7. Bass Booster Button
  8. CH Button (Channel Button)
  9. Mode Switch Button

Product Specification

Bluetooth Version V5.0
Bluetooth Connection Distance 10m (Max. )
Frequency Range 87.5-108.0MHz
FM Transmission Distance Approx.3m
USB Output QC3.0 (5V/3A,9V/2A,12V/1.5A)
Type-C Output PD3.0 (5V/3A,9V/2A,12V/1.5A)
Shared Output 5V/4.8A (MAX. )
Input 12V-24V
Audio Format MP3, WMA, MAV, APE, FLAC
USB Flash Drive Capacity 64GB (Max. )
Product Weight Approx. 38g
Product Size Approx. 46.046.779.7mm

How to Use

FM Transmitter Set-up

  1.  Tune the car radio to an unused FM frequency.

  2. Plug the FM transmitter into the cigarette lighter or power port. It will be automatically powered on with the LED displaying the vehicle’s battery voltage, FM frequency, then showing the word gbt”.
    Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter -
fig 2

  3. Adjust this transmitter to the same frequency by pressing the CH button, then slide the Multi-function button (left or right) when the LED displays FM frequency.

Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter -
fig 3

Tips for the best audio quality:

  1. Find the idle frequency with minimal interference.
  2. Volume control: adjust the volume of the car radio to 1/3 or 1/2, but not exceed 2/3; the phone to 2/3 or 4/5, but not to full volume.

Bluetooth Mode
Using the Bluetooth function for the first time, you need to pair your mobile device with this FM transmitter. Activate the Bluetooth function of your phone, then connect to -UBCH261″. (Note: Pairing password is “0000”, if needed. )

Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter -
fig 4

**Bluetooth Calling

**

Multi-function button

Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter -
fig 5

Note:

  • In the music playing mode, when there is an incoming call, it will automatically switch to telephone mode and play the phone number in English.
  • If the volume was set below 22 at the last use, the next time you use the transmitter it will default to 24. If it was between 23 and 30 the last time it was used, it will be kept at the same level the next time it is turned on.

USB flash drive Mode
Insert the USB flash drive into the USB flash drive port, then the music (top- level folder only) in the USB flash drive will be played automatically.

Music Playing

Multi-function button

Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter -
fig 5.

Bass Booster Button

Mode Switch Button

Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter -
fig 8Note:
If the volume was set below 22 at the last use, the next time you use the transmitter it will default to 24. If it was between 23 and 30 the last time it was used, it will be kept at the same level the next time it is turned on.

Charger Mode
When this transmitter is powered by a car lighter socket, connecting the PD USB-C port/ QC 3.0 USB port to your mobile phone with a required USB cable (not included), it will serve as a mobile phone charger.
Note: The fast charging function can only be activated by using the PD USB-C port or QC 3.0 USB port atone.

Cautions

  1. When the car’s battery voltage is less than 12V, the LED display will flash to remind you to charge the car battery.
  2. The transmitter will connect to the pre-set phone automatically when turned on. (Keep Bluetooth function activated).
  3. Hang up via the phone if answering with the handset.
  4. Please do not use the transmitter in severe high temperatures. humidity, dusty or corrosive environment.
  5. Please remove the product from the cigarette lighter when not in use for a long time.
  6. Never disassemble the product without due permission, otherwise, the warranty will be invalid.

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cone the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Premium 36-month Warranty Policy
unbreakable commits to providing a unique 3-year warranty for products ordered on authorized channels. You could enjoy our worry-free warranty by simply registering on our UNBREAKcable Facebook Messenger at:
m.me/UNBREAKcableproducts
(Recommended if you are a Facebook user) OR via the UNBREAKcable website: www.UNBREAKcable.com/warranty
Please register your warranty within 5 days after purchase, your registration information will serve as warranty claim proof.
For more unbreakable information, please visit www.UNBREAKcable.com

Happy with your purchase? We can do better with your encouragement!
Encourage the UNBREAKcable team today by sharing us your user experience online!

Need help with your purchase?
We stand by our products to make everything right! Contact us at m.me/UNBREAKcableproducts (Strongly recommended for Facebook Messenger users) O www.UNBREAKcable.com

Important!
Please register your warranty within 5 days after purchase, your registration information will serve as warranty claim proof.


Prolinx GmbH Brehmstr.56,40239 Duesseldorf Germany
Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter -
icon 1 Syncwire UK Ltd. C/O Lai and Co.109 Portland Street, Manchester, M1 6N

Questions or Feedback?
support@UNBREAKcable.com
Thank you for choosing us.

Documents / Resources

| Shenzhen Leaderment Technology UBCH2612ASUP Car Wireless FM Transmitter [pdf] User Manual
UBCH2612ASUP, UBCH261, 2ASUPUBCH261, Car Wireless FM Transmitter
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals