Shenzhen Leaderment Technology WA-WL007 Single Coil Magnetic Wireless Charger User Manual
- June 6, 2024
- Shenzhen Leaderment Technology
Table of Contents
User Manual
Product Specifications:
| Input: | 5V/9V12V 3A Max) |
|---|---|
| Output: | 15W(max). 5W/7.5W/10W/15W iPhone 7.5W |
| Operating Temperature: | Normal: 25± 3 C |
Packing List:
Wireless Charger / PD 20W Adapter/ Magnetic Sticker/ Manual
Operating Steps:
-
Connect the wireless charger with the adapter included in the package and plug the adapter into a socket.
-
Paste the magnetic sticker to the phone case to enhance magnetic forces if needed.
-
Place your wireless charging supported phone on the charging pad and ensure its center aligns with the center of the wireless charger.
Notes:
- Keep the wireless charger away from water, liquid, or wet areas.
- Do not try to disassemble, repair or remold the product.
- Do not allow children or animals to chew or suck the device.
- Cut off the power before cleaning the charger.
- Only use a dry cloth or brush to clean the device.
- Stop using it if visible defects are observed on the charger.
- Unplug the device when unused for long periods of time.
- Make sure it’s compatible with your device before using it.
- A thick phone case (over 5mm) needs to be removed before charging.
- Ensure no metal objects or magnetic material interferes with the wireless charger.
- To achieve fast charge, a QC2.0/3.0, PD adapter is required.
FCC WARNING:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance between 20cm of the radiator of your body.
FCC ID：2ASUP- WA-WL007
Manufacturer’s Name: Shenzhen Leaderment Technology Co., Ltd.
Sample Description: Single Coil Magnetic Wireless Charger
Model number: WA-WL006, WA-WL007, WA-WL008
Operating Temperature: ‐10° C to 40° C
Manufacturer’s Name: Shenzhen Leaderment Technology Co., Ltd.
Model number: WA-WL006, WA-WL007, WA-WL008
Operating Temperature: -10° C to 40° C
This device was tested for operations. To comply with RF exposure
requirements, a minimum separation distance of 20cm must be maintained between
the user’s body and the charger, including the antenna. Third-party belt
clips, holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna. This device is in
compliance with the essential requirements and other relevant provisions of UK
Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety)
Regulations (SI 2016/1101); and UK Electromagnetic Compatibility Regulations
(SI 2016/1091). All essential radio test suites have been carried out.
1. The device complies with RF specifications when the device is used at 20cm
from your body.
| Radiated H-Field | -61.801dBuAm(@10m) |
|---|---|
| TX/RX frequency range | 110-205 kHz |
| Prolinx GmbH |
Brehmstr.56, 40239 Duesseldorf Germany
---|---
| Syncwire UK Ltd.
C/O Lai and Co.109 Portland Street, Manchester, M1 6N
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>