IM Labs CC3G cprCUBE Pro with CPR Feedback App User Guide

– User Guide-

MATCHING SCENARIO CARDS

WARRANTY

1. The manufacturer offers a LIMITED WARRANTY against any defects in workmanship or materials under normal use for one (1) year from the date of purchase. Any component of the cprCUBE which proves defective within the warranty period will be repaired, free of charge. The customer is responsible for shipping and handling fees to the place which the manufacturer designates.
2. The customer must provide proof of the date of purchase, place of purchase, and the purchase price in order to obtain service under this limited warranty. No agent, representative, or dealer of the Manufacturer has the authority to alter the obligations or limitations of this limited warranty.
3. THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY AGAINST MANUFACTURE SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE GOODS AS PROVIDED HEREIN. Repair of any component of any cprCUBE does not extend this limited warranty or begin a new limited warranty period.
4. The manufacturer reserves the right to refuse warranty service or replacement when product failure is due to abrasion, abnormal use, misuse, mishandling, misapplication, accident, neglect, improper installation, modification, use of unauthorized parts or attachments, adjustments or repair performed by anyone other than manufacturer or its authorized agent, or any causes other than defective workmanship or material. This limited warranty does not cover failure or damage resulting from unsuitable operating environments or storing environments or natural disasters or acts of God. MANUFACTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THE cprCUBE OR THE BREACH OF THIS OR ANY OTHER EXPRESSED OR IMPLIED WARRANTY.

ROLE-PLAYING

COMPONENTS

1. User Guide
2. Scenario cards
3. Color ID stickers
4. cprCUBE Board
5. cprCUBE main body

https://qrgo.page.link/6PYXx

HOW TO USE

1. Body rear battery fitting

2. Turn On/Off
   Push once to turn it on.
    Push for 2 seconds to turn off.

3. Put on the Board
   Unfold the board and place the cprCUBE main body matching the logo orientation.

Start guide mode
Compress cprCUBE main body for more than 3 seconds to activate guide mode.

PRODUCT INFORMATION

[ Product Information ]

FCC ID: 2ASY3CC3G

[ Product Specification ]

1. cprCUBE Board

Dimension| 100×110×0.5 (mm) (Folded)
400×330 (mm) (Unfolded)
---|---
Weight| 17.5g

2. cprCUBE main body

RF Specification

• BLE/ 1Mbps
• Frequency 2.4 GHz Band
• Max. RF output power: -13 dBm
  Operation Temperature -10~50°C

This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.

PRODUCT INFORMATION

FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Part 15.21
Any changes or modifications (including the antennas) to this device that is not expressly approved by the manufacturer may void the user’s authority to operate the equipment.

FCC Part 15 B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

CAUTION

• Keep the used batteries out of reach of children and dispose of them separately.
• If you do not use the device for a long period of time remove and store the batteries.
• Do not use a new battery and an old battery together.

Copyright©2020. I.M.LAB Inc.
E-mail. contact@imlabworld.com
Tel. 070-5056-3900
Fax. 0505-170-3900
7F ,165, Yeoksam-ro, Gangnam-gu, Seoul

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>