KYE SYSTEMS M200BT Multimedia Speaker System Instruction Manual
- June 5, 2024
- KYE SYSTEMS
Table of Contents
M200BT Multimedia Speaker System
Instruction Manual
Operation Description
- The USB power plug of the speaker is plugged in.
- Turn on the power and enter the LINE function by default. The red LED is always on. At this time, the audio cable can be inserted into the audio device to play music.
- Short press the **** button on the remote control to enter the Bluetooth status, and the blue LEDs will flash alternately. At this time, you can pair the Bluetooth device. After the pairing is successful, there will make a notification sound. The blue LED is always on. At this time, the audio device can play music.
- Short press the button on the remote control to stop playing music, and click again to resume playback. A short press on the remote control, increases the volume, press twice consecutively to go to the previous song, long press button on the remote control to increase the volume, and the speaker sounds louder. A short press on the remote control, the volume decreases, press twice consecutively to go to the next track, long press button on the remote control to decrease the volume, and the speaker sound is reduced.
- Pairing: In the Bluetooth status, long-press the button on the remote control for 3 seconds. When the speaker will make a notification sound, it indicates that the current pairing device is released and the pairing mode is entered. The blue LED flashes alternately. At this time, Bluetooth device pairing can be performed.
- After pressing the button on the remote control to enter the Bluetooth mode. If there is a paired device, it will return to the paired device. If there is no paired device, it will enter the pairing mode.
- In pairing mode, search for the Bluetooth pairing device 3 times, and it will automatically turn off if there is no signal for 5 minutes in Bluetooth mode.
- Turn off: Long press the button for 3 seconds to turn off the power and the LED.
- After restarting, the volume level will automatically return to the middle value, and the last volume level will not be remembered.
Button Function
| Status| Function| Button Operation| Description
---|---|---|---|---
1| Turn off| Turn on| Short press the button| The red LED is on when the USB
power cord of the speaker is plugged in and enters LINE mode
Power on| Bluetooth| Short press button| Blue LED flash alternately and enter
pairing status. The blue LED is always on.
Power on| Line| Short press button| When the speaker will make a notification
sound, it indicates that the current LINE mode is entered. The red LED is
always on.
Power on| Turn off| Long press the button for 3
seconds| Turn off the power and LED.
2| Bluetooth / Line| Increase Volume| Short press button
Long press button| Short press the button to increase volume.
Long press the button increase volume continuously.
3| Bluetooth / Line| Decrease Volume| Shot press button Long press .1
button| Short press the button to decrease the volume
Long press the button to decrease the volume
continuously.
4| Bluetooth| Previous Track| Press twice button| Press twice button
consecutively to go to the previous track
| Status| Function| Button Operation| Description
---|---|---|---|---
5| Bluetooth| Next Track| Press twice button| Press twice button
consecutively to go to the next track
6| Play music| Pause| Short press button| Short press button to stop playing
music, and click again to resume playback.
Line| Mute| A short press button| Short press the button and enters mute
status. Press it again, and the music unmute.
7| Bluetooth| PAIR| Long press the button for 3 seconds| Long press the button
for 3 seconds. When the speaker will make a notification sound, it indicates
that the current pairing device is released and the pairing mode is entered.
The blue LED flashes alternately. At this time, Bluetooth device pairing can
be performed.
8| | RGB lighting touch control| Switch between ten lighting modes| Touch RGB
lighting the button can switch between ten lighting modes.
FCC warning:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.