marta MT-2235 Pill Remover User Manual
- June 12, 2024
- MARTA
Table of Contents
marta MT-2235 Pill Remover
Product Information
The MT-2235 is a portable electric lint remover that comes with a housing, blades, protective metal grid, removable lint container, on/off switch, USB connector, USB-cable, and a brush for blade cleaning. The appliance is manufactured by Cosmos Far View International Limited and has a net weight of 0.19kg and a gross weight of 0.25kg.
Specifications
- Power supply: 2 x 1.2V 600/
- Package size (L x W x H), mm: 92 x 72 x 145
Important Safety Instructions
Please ensure that the person in charge of security arrangements uses the product safely.
Instruction for Use
- Attach the blades to the housing.
- Connect the USB-cable to the USB-connector located on the appliance.
- Plug the USB-cable into a power source.
- Turn on the appliance by sliding the On/Off switch to the On position.
- Gently press the appliance against the fabric where lint needs to be removed.
- After use, turn off the appliance by sliding the On/Off switch to the Off position.
- Remove the lint container and empty it.
- Clean the blades with the brush provided.
Clean and Care
- Keep the appliance clean and dry.
- Store in a cool and dry place.
- Avoid using the appliance near water or other liquids.
- Avoid using the appliance near heat sources.
For more information, visit http://multimarta.com/ or call +8(812) 325-23-34.
Parts list
- Housing
- Blades
- Protective metal grid
- Removable lint container
- On / Off switch
- USB- connector
- USB-cable
- Brush for blades cleaning
Real set of the appliance could be different from listed in the User manual. Check once buy
IMPORTANT SAFETY INSTRUCTIONS
Read the following instructions carefully before operating the appliance and save it for reference in the future.
- It is not intended for industrial use
- For indoor use only. Use only for domestic purposes according to the instruction manual.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
- Do not use the item to clean delicate clothing.
- Do not use the unit as a shaver for body and face.
- Do not use on the clothes while wearing.
- Do not use it for plush clothes, for clothes with nip, embroidery etc.
- Do not use the appliance if you have any physical or mental disability and have no any operational experience with similar technics. In such cases the user must have the operating instructions from the person which in charge of security arrangement of the user.
INSTRUCTION FOR USE
-
Before charging please make sure the switch is off. Insert the USB charging plug into the lint remover and insert the aanother USB plug in to the charger. When the charger is plugged into the power outlet, the charging indicator is on.
-
Before the first use of the appliance completely discharge and then charge the battery. It takes about 8 hours to charge the batteries for the first time. Usage time with fully charged batteries is approx. 30 minutes.
-
Charge the batteries at least once in 6 months, even if the lint remover is not in use.
-
Place the clothes on a flat surface, preferably an ironing board, smooth the clothes out.
-
Remove the protective cover from the unit.
-
Set the ON/OFF switch to “ON” position and begin to clean lint or fuzz off the clothes by fluent circular movements without pressure.
Note: Do not press hard on the unit since the clothes or the lint remover head can be damaged. -
Set the ON/OFF switch to “OFF” position to switch off the appliance.
-
Take the lint container out and remove the lint out of it.
CLEAN AND CARE
- Carefully use a flat edge screwdriver or coin and push the blade net from side to open.
- Take out the blade and clean lint and fibers with the brush.
- Replace the blade on the axis of motor and carefully rotate it slightly and firmly.
- Put the blade net on the body and push it into position.
- Wipe over the body, using a soft damp cloth.
- Do not clean this un with abrasive or any chemical solutions.
- Wipe the unit dry
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating,
rubber seals, etc.)
Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production. The
manufacturer reserves the right to change the design and technical data of the
appliance without notice.
Producer: Cosmos Far View International Limited. Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China. Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>