AIPER P1111 Handheld Pool Vacuum Cleaners User Manual
- June 8, 2024
- AIPER
Table of Contents
AIPER P1111 Handheld Pool Vacuum Cleaners
Thank you for choosing AIPER handheld pool vacuum
You have joined millions of people to enjoy the convenience of robotic pool
cleaning.
This user manual helps you to keep your vacuum performing at its best. Please
take a few moments to read through it.
If you have any questions, please contact our customer service for assistance
or visit www.aiper.com for more information.
Aiper Customer Service: US Toll Free:
1-866-850-0666
Email: service@aiper.com
Facebook: @AiperOfficial
Safety Warning
The cleaner is not a toy, and is operated by people older than 8 years age. Any people who operates the cleaner, has to read the manual carefully before work it.
- The cleaner is designed to clean the swimming pool, SPA.
- Please use the original batteries and charger when using.
- Only charging it when the cleaner is power off.
- Put the cleaner into a clean and dry place. Do not expose it under the sun, or close to explosive.
- The filter bag is easy to be broken when there is sharp substances under water.
- Do not work it when out of water.
- Do not close to the vacuum head when it is working, due to its suction power, especially for the human body, animals, hairs or clothes.
- Do not disassemble the cleaner without professional guidance or notice from the authorized distributor or manufacturer.
- Do not leak the lubricant oil, and it causes water polluted.
- Stop to work the cleaner when there is anything wrong; Please contact with the authorized distributor or replace it to the original parts/accesso ries.
- Cleaner working conditions:
- Water depth from 30cm to 300cm
- Water temperature: 4°C( 39.2°F )-35°C( 95°F )
- Vac head
- Front filter
- Cleaner body
- Switch
- Charging position
- Poles fitting
- Portable handle
- Filter basket
- Large mesh filter bag
- Charger
Charger
- Use the original charger provided only.
- For indoor use only. The charger should not be used outdoor and not be exposed to rain, humidity, any liquid or heat.
- Keep the charger out of children.
- Never use the charger if any damage is found.
- Do not handle the cleaner and charger with wet hands and bare feet,when charging the cleaner.
- Disconnect the charger from power when not in use.
- If the wire is damaged, it must be replaced by a new charger to avoid danger.
- Make sure the cleaner and charger are totally dry before charging.
- Charge the cleaner 3 hours prior to the first use.Normally cleaner can be operated about 60 minutes after fully charged.
Battery disposal
- The cleaner battery is a lithium battery, it must be disposed properly, please contact with your local authority for more information.
- Never attempt to disassemble the lithium battery.
- Remove all personal items such as rings, bracelets, necklaces and watches when unwiring a lithium battery from the vacuum unit.
- The battery causes short curcuit current, as well as severe burning when it is high enough.
- Wear complete eye protection, gloves and protective clothing when removing the battery pack.
- No smoking or sparkling flame near the cleaner, or, it may causes unknow gases.
- If acid comes in contact with skin and clothing, wash immediately with plenty of soap and water.
- If acid comes in contact with eyes, immediately flood eye with running cool water for at least 15 minutes.Get medical attention immediately.
Above warning and cautions are not intended to incorporate all possible instances for risks and/or severe injury. Pool/spa owners should always exercise intensive caution and common sense when operating the cleaner.
How to use ?
How to connect with charger ?
- Before connection to the cleaner, firstly connecting the charger with socket to check the charger quality, when the light is green, the charger is ok; Then, connecting to the cleaner, if the light is red, it means the cleaner is charging.
- Around 3 hours later, the light turns to green, it means the machine is full of power now.
How to assemble the cleaner ?
Component installation
Please assemble the machine by arrows, especially the signs ON/OFF , OPEN /
CLOSE at the body.
Handle assembly
The cleaner can either connect with portable handle A, or standard telescopic
poles B ( B is not with shipment, needs to extra purchase )
Suction head assembly
Please take the correct way to assemble the vacuum head and front filter,
please be sure the front filter way is right, otherwise, the cleaner can not
work efficiently.(See, Fig “A” and “B”)
Filter bag assembly
How to choose the correct filter bag?
- Large mesh filter bag
It is used for dirty pools, or plenty of rubbish into the pools, such as begin ning of season, after big shower or rainning.
How to assemble filter bag?
Please take the steps per arrows:
How to clear the filters?
Wash the front filter
Please follow the pics, and take care of machine sign OPEN/ CLOSE
.
Wash the back filter
Please follow the arrows:
How to assemble the batteries?
- Please follow the pics to get the batteries out.
- Please follow the pics to put the batteries into.
Trouble shooting
| Problem | Possible Cause | Action |
|---|---|---|
| Cleaner does not capture the debris | Battery is running out | Charge the |
battery again. Normally cleaner can operate about 60 minutes after fully
charged.
Impeller is jammed| Power off the cleaner and visually check the gap in middle
of the cleaner to see if the impeller is jammed. you can use your hand to
rotate the impeller two circles to make the impeller rotation looser.
WARNING! Make sure cleaner is power off when servicing the cleaner.
Impeller is broken| Contact your dealer for impeller replacement.
When the filter bag is full| Detach the filter basket and filter bag, and clean
them.
Garbage flowing out from the Transparent Suction Head part| The soft rubber of
the rear impeller is broken| The soft rubber of rear impeller is like a door
in case the garbage in the filter bag will flow backwards into impeller and the
cover of transparent suction head part.
Garbage flow out from the rear filter bag| Filter sock is damaged| Replace a
new filter sock.
Handle/pole connector cannot be secured in assembly| Side pin broken| Using
the new V-Shape clip
Cleaner cannot be recharged| Battery is dead| Contact dealer for battery
replacement. WARNING! When you replace the battery, please contact the
local dealers to purchase the original lithium battery in case that the
electric cleaner is destroyed.
The charger is out of order| Contact dealer for proper transformer.
WARNING! Using wrong charger will result in damaging the cleaner /battery
and void the warranty.
Environmental Programmes
Please respect the local regulations and help to protect the environment.
Return non-working electrical equipment to a facility appointed by your
municipality that properly recycles electrical and electronic equipment, Do
not dispose them in unsorted waste bins.
For items containing removable batteries, remove batteries before disposing of
the product.
We reserve the right to change all or part of the features of the articles or contents of this document, without prior notice.
Warranty
This product is covered by Aiper warranty for 12 months from the date of its original purchase. If the product fails due to manufacturer defects, please contact us by the following ways to launch a warranty. We will instruct you on how to return the products for repair/replacement.
Statement
We can only provide after sale services for products that are sold by Aiper, if you have purchased your unit from a different place, please contact the seller for return and warranty issues.
Aiper Customer Service
US Toll Free: 1-866-850-0666
Email: service@aiper.com
Facebook: @AiperOfficial
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>