milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V Instruction Manual

June 5, 2024
Milwaukee

milwaukee LOGO

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12
V

INTRODUCTION

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
1

OVERVIEW

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
2

 ON / OFF

VOLUME

MODE SELECTION

BASS / TREBLE

DABmilwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
7

DAB Presetmilwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
8

FMmilwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
10

FM Preset

AMmilwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
12

AM Preset

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
13

Display Type DAB

Display Type FMmilwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
15

BLUETOOTH

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
15

Clock /DAB/FM/AMmilwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
16

Reset All

Firmware Versionmilwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
19

CHARGING

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
21

CONNECTION

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
22

WARNING

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
23

TECHNICAL DATA

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
26

RADIO SAFETY WARNINGS

  • Never disassemble or modify this apparatus in any way.
  • Do not use this apparatus near water.
  • Clean only with dry cloth. Certain cleaning agents and solvents are harmful to plastics and other insulated parts.
  • Keep the apparatus handle clean, dry and free of oil or grease.
  • Refer all servicing to qualifi ed service personnel.
  • Do not install near any heat sources.
  • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
  • No flame sources, such as lighted candles, should be placed on the apparatus.
  • It shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Do not place the product in closed bookcases or racks without proper ventilation.
  • Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
  • Do not stand on unit.
  • Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

CHARGER SAFETY WARNINGS

  • Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors off er to retrieve old batteries to protect our environment.
  • Do not store the battery pack together with metal objects (short circuit risk).
  • Use only Milwaukee M12 System chargers for charging Milwaukee M12 System battery packs. Do not use battery packs from other systems.
  • Caution! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Caution!

  • Risk of explosion if the battery is replaced by an incorrect type;
  •  high or low extreme temperatures that a battery can be subjected to during use, storage or transportation,
  •  low air pressure at high altitude,
  •  replacement of a battery with an incorrect type that can defeat a safeguard (for example in the case of some lithium battery types),
  •  disposal of a battery into fi re or a hot oven, or mechanically crushing or cutting of a battery,
  •  or leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of fl ammable liquid or gas,
  •  or a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  • Never break open battery packs and chargers and store only in dry rooms. Keep dry at all times.
  • Do not touch the tool with conducting objects.
  • Never charge a damaged battery pack. Replace by a new one.
  • Before use check machine, cable, and plug for any damages or material fatigue. Repairs should only be carried out by authorised Service Agents.
  • This appliance is not intended to be used or cleaned by persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given instructions concerning the safe use of the appliance by a person legally responsible for their safety.
  • They should be supervised whilst using the appliance.

SPECIFIED CONDITIONS OF USE
The radio charger can charge Milwaukee System 12 V batteries. The radio is suitable for reception of broadcasting and to import audio sound of diff erent devices via Bluetooth and analog audio connection. Via USB connection the radio can charge USB devices. This radio is designed to withstand harsh operating environments as well as unintentional drops. Do not use this product in any other way as stated for normal use.

EC-DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio equipment type M12 RC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://services.milwaukeetool.eu

MAINS CONNECTION

Connect only to single-phase a.c. current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II.

BATTERIES

Low Battery Indicator:

When the radio is powered by a battery pack and its charge falls below 10%, the low battery indicator is displayed. Battery Pack Protection: To protect the life of the battery pack, the radio will shut off when the battery’s charge becomes too low. If this happens, plug radio charger to a mains connection and charge the battery pack. Battery packs that have not been used for some time should be recharged before use. Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating). The contacts of chargers and battery packs must be kept clean. For an optimum lifetime, after use, the battery packs have
to be fully charged.

CHARGER CHARACTERISTICS

After inserting the battery into the reception of the charger the battery will automatically be charged (red lamp is illuminated continuously) When a hot or cold battery pack is inserted into the charger (fl ashing red lamp), charging will begin automatically once the battery reaches the correct changing temperature (0°C…60°C). Charging time varies depending on the battery temperature, charge needed and the type of battery pack being charged.If both LEDs flash at the same time, either the battery has not been completely mounted or there is a fault in the battery or the charger. For safety reasons, you must stop using the charger and battery immediately and have them inspected by a Milwaukee Customer Service Centre.

BUTTONS

milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
24

TRANSPORTING LITHIUM BATTERIES

  • Lithium-ion batteries are subject to the Dangerous Goods
  • Legislation requirements.
  • Transportation of those batteries has to be done in accordance with local, national, and international provisions and regulations.
  •  The user can transport the batteries by road without further requirements.
  •  Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations.
  • Transport preparation and transport are exclusive to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries

  •  Ensure that battery contact terminals are protected and insulated to prevent short circuits.
  • Ensure that the battery pack is secured against movement within the packaging.
  • Do not transport batteries that are cracked or leak.
  • Check with the forwarding company for further advice

MAINTENANCE

If the supply cord of this appliance is damaged, it must only be replaced by a repair shop appointed by the manufacturer, because special purpose tools are required Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the ten-digit No. as well as the machine type printed on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany

SYMBOLSmilwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V
25

Documents / Resources

| milwaukee M12 RCDAB+ Cordless radio charger DAB+ 12 V [pdf] Instruction Manual
M12 RCDAB, Cordless radio charger, DAB 12 V
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals