LUXPRO LP1042V2 Everyday Carry Pen Light User Manual
- June 3, 2024
- LUXPRO
Table of Contents
LUXPRO LP1042V2 Everyday Carry Pen Light
Features
- Constructed with aircraft-grade aluminum
- LPE optics
- Push/pull focus beam
- Knurling metal handle
- High-quality pocket clip
- Tactical on/off button
- IPX4 waterproof rating
- Batteries included (2 AAA)
Operation Instructions
On/Off: Press and release the button on the tail cap to turn the light on and off.
Cycle Modes: First turn the light on by pressing down the button on the
tail cap completely and releasing it. Half-press the button to cycle through
modes (High/Low).
Light automatically resets to High mode when turned off.
Focus Head: To focus the light beam, gently push the head away from the
light to extend it. Pull the head back towards the light to widen the beam.
Battery Replacement
The LP1042V2 uses 2 AAA batteries. To replace the batteries, turn the tail cap
counterclockwise to remove it. Tip the light downward to slide the batteries
out of the penlight. Insert new batteries into the light (+) side facing down.
For best results, we recommend using brand new alkaline batteries that are the
same voltage and brand.
Re-attach the tail cap by pressing down and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.
Product Warranty
The LP1042V2 has a Limited Lifetime Warranty Against the Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>