wiltec 60281 Heavy-Duty Shelving Unit User Manual
- June 5, 2024
- wiltec
Table of Contents
wiltec 60281 Heavy-Duty Shelving Unit
Read and follow the operating instructions and safety information before using
for the first time.
Technical changes reserved! Due to further developments, illustrations,
functioning steps, and technical data can differ insignificantly.
Updating the documentation If you have suggestions for improvement or
have found any irregularities, please contact us.
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights re-served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible
mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible
efforts to ensure that the operating manual is complete, faultless, and up to
date, mistakes cannot be entirely avoided. If you should find a mistake or
wish to make a suggestion for improvement, we look forward to hearing from
you.
Send an e-mail to: service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in
our online shop via: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask
you to call us previously or placing your order via the webshop.
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
To return orders for exchange, repair, or other purposes, please use the following address. Attention! To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury
we urge that our clients take some basic safety precautions when using this
device. Please read the operation instruc-tions carefully and make sure you
have understood its content.
Keep these operation instructions safe.
Dear customer, as a user, please observe the information in these operating
instructions to maintain the condition of the item and to ensure safe
operation. Please pay attention to this in case you pass this product on to
third parties, too. Therefore, keep the operating instructions in a safe and
dry place for future reference.
Intended use
- This product is intended for the storage of objects. The product is only intended for use in private indoor areas.
- Any use other than that described above or any modification of the product is not permitted and can lead to injuries and/or damage to the product.
- The manufacturer assumes no liability for damage resulting from improper use. The product is not intended for commercial use.
- The shelf is not suitable for rooms with high humidity, as the humidity damages the wooden components.
Scope of delivery/parts
| № | Name | Qty. |
|---|---|---|
| 1 | Shelf | 4 |
| 2 | Upright | 10 |
| 3 | Cross member (approx. 70 cm) | 8 |
| 4 | Cross member (approx. 40 cm) | 8 |
| 5 | Cross member (approx. 42 cm) | 4 |
| 6 | Connector (only necessary for vertical assembly) | 5 |
| 7 | Protective cap | 10 |
Technical data
Measures
| Set-up variant | Measures (W×H×D in cm) |
|---|---|
| vertical | approx. 70×160×77 |
| horizontal | approx. 160×70×77 |
Material
| Shelves | Chipboard |
|---|---|
| Supports, connectors, cross members | Galvanised metal |
| End caps | Plastic |
| Max. load capacity (㎏) | 50 (per shelf) |
Warning!
Accident and fatal injury risk for infants and children!
- Never let children with the packaging materials unsupervised. There is a risk of suffocation.
- Keep the product away from children.
- It is not a toy.
Mortal danger!
Make sure that you do not hit any electricity, gas, or water lines when you
drill into the wall. If necessary, check with a pipe/cable detector before you
drill into a wall.
Risk of injury!
- Ensure that all parts are undamaged and properly assembled/fitted. In the event of incorrect assembly/fitting there is a risk of injury. Damaged parts can affect safety and function.
- Do not let children unsupervised. The product is not a climbing frame or tool. Make sure that people, especially children, do not climb up onto the product and/or lean against it. Injuries and/or damage may result.
- Care was taken during the manufacture of the product to avoid any sharp edges. Handle the individual parts carefully so that any accidents/injuries during set-up and use are avoided.
- When assembling/fitting the product, please be sure to wear protective gloves.
- Ensure that the product is assembled/fitted only by competent adults.
- Only set the product on a level surface.
- Before using the product, check its stability.
- Do not load the product with more than 50 kg per shelf. Otherwise, there is a risk of injury and/or damage to the product.
- The part showing the maximum load must be fitted at a clearly visible height (at the front).
- Ensure that the unit loading is evenly spread – avoid any overloading.
- To avoid any potential damage to the floor, pull on protective caps (7).
- After assembly, check that all parts are firmly connected together.
- Must be secured to the wall, otherwise a safety risk can occur.
- Before securing the product to the wall, check whether the chosen wall is suitable for this.
- Before securing the product to the wall, find out about appropriate fitting wall mounting material for your wall. These are not included with the product.
Assembly
- Remove the packaging material and dispose of it properly.
- Check if all components of the listed parts are present.
- To assemble the products, use only a rubber hammer.
- When fitting the cross members, ensure that the carrier edge for the shelving points up.
- Assemble the heavy-duty shelving according to instructions for use A–H.
Clean and maintenance
- Do not under any circumstances use petrol, solvents of any corrosive cleaning agents.
- For cleaning, use a light, slightly moistened, lint-free cloth and mild cleaning agent.
Disposal
- Dispose of packaging in local recycling containers.
- When the product is no longer in use, you will be able to find out about ways to dispose of it from your local authority or city administration.
Assembly
* Not included
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in
part, of this instruction manual require the written permission of WilTec
Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
References
- Aoyue.de
- Teichtip.de
- WilTec - Ihr Online Shop für Haus, Garten, Werkstatt, Freizeit
- WilTec Wildanger Technik GmbH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>