KLARSTEIN WS-3500 Spin Dryer Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
KLARSTEIN WS-3500 Spin Dryer
**Instruction Manual**
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the items and cautions mentioned in the instruction manual is not covered by our warranty and any liability. Scan the QR code to get access to the latest user manual and other information about the product
CONTENT
Safety Instructions 14
Product Overview 17
Commissioning 18
Operation 20
Cleaning and Care 21
Disposal Considerations 22
Manufacturer & Importer (UK) 22
TECHNICAL DATA
SAFETY INSTRUCTIONS
- The device can only be used by children 8 years of age and older and persons with limited physical, sensory or mental abilities or with lack of experience and/or knowledge if they are supervised by a person responsible for their safety or have been instructed in the safe use of the device and have understood the dangers associated with the device.
- Do not expose this equipment to rain.
- Do not place objects filled with liquids, such as vases, on this unit.
- Use only the recommended accessories.
- Do not repair this unit yourself.
- Contact qualified service personnel for maintenance.
- Do not drop metal objects into this unit.
Power cord / power supply
- Only connect the device to sockets that correspond to the voltage specified on the device.
- Insert the power plug fully into the wall outlet.
- Do not pull, bend, or place heavy objects on the cable.
- Do not handle the plug with wet hands.
- When pulling the plug out, hold it by its body.
- Do not use a damaged mains plug or socket.
- Install this unit so that the power cord can be disconnected immediately from the wall outlet in the event of a malfunction.
Small objects/packaging parts
Keep the small objects (e.g. screws and other mounting materials, memory cards) and packaging parts out of the reach of children so that they cannot swallow them. Do not let small children play with foil. There is a danger of suffocati
Installation
- Place the appliance on a dry, level, waterproof and heat-resistant surface.
- The power outlet must be easily accessible in order to disconnect the device from the power circuit quickly in an emergency.
- Do not install or position this unit in a bookshelf, built-in cupboard, or other confined space. Ensure good ventilation of the appliance.
- Do not place the product on top of an amplifier or other device that may become hot. This heat could damage the product.
- Do not expose this product to direct sunlight, high temperatures, excessive moisture, or excessive vibration.
AC adapter
- The mains adapter can be operated with 220 240 V alternating current.
- However, use a suitable plug adapter if the plug does not fit into the mains socket.
Intended use
This device is designed for dry spinning garments. It is designed exclusively for this purpose and may only be used for this purpose. It may only be used in the manner described in this manual. This appliance is not intended for use by persons (including children) with impaired physical, sensory or mental abilities or for lack of experience and/or knowledge, unless they are supervised or instructed by a person responsible for their safety how to use this appliance. Children should be supervised to ensure that they do not play with the device.
Transporting the appliance
Please keep the original packaging. To ensure adequate protection during transport, pack the unit in its original packaging.
Cleaning
Clean the device with a soft cloth and warm water, if necessary with soapy water. Never immerse the base in water. Excessive pressure when wiping may damage the surfaces. Rubber or plastic parts should not be in contact with the unit for long periods of time.
Repairs
- Repairs to the unit should only be carried out by an authorised specialist workshop.
- Modification or alteration of the product impairs product safety. Risk of injury!
- Never open the product without authorization and never carry out repairs yourself!
- Incorrect assembly may lead to malfunctions or total failure.
- Never open the device.
- No liability is assumed for consequential damage. Technical changes and errors excepted!
- The warranty expires if the device is tampered with by third parties
Special notes
- The maximum filling quantity / maximum filling weight is 6 kg.
- Fill the spin dryer evenly.
- Do not move the machine during operation.
- Only spin laundry with the machine. Do not spin shoes or other heavy objects. Make sure that no small parts, such as keys or screws, get into the appliance.
- The appliance is not intended for commercial use, but only for household use.
- Improper loading may damage the drum or drum holder, resulting in injury
PRODUCT OVERVIEW
COMMISSIONING
Before the first operation
- Before first use, remove any foam from the interior and wipe the drum with a damp cloth and mild detergent.
- Remove the black, round motor lock from the bottom of the unit. This will prevent the motor from moving too far during transport and may damage the unit. How to remove the motor lock is described in the next section.
- Make sure that your power supply has a voltage of 220-240 V / 50 Hz and is properly grounded.
- Set the switch to the 0 position and open the cover.
- Plug the mains plug into the socket.
- Place a container to collect the water under the drain. It is recommended that you do this before loading the unit, as water from wet clothing may run off before the unit is switched on.
How to remove the motor lock
- Move the handle in the direction indicated by the arrow.
- Pull out the motor lock.
How to fill the centrifuge correctly
- Put each garment spread out in the centrifuge. The lightest garments, such as socks or scarves, should be placed in the middle if possible.
- Try to avoid open spaces and uneven weight distribution.
- After filling, place the round safety cover in the drum on the clothing. Do not use too much force when pressing down on the clothing.
- The safety cover prevents items of clothing from being pushed out of the drum, possibly damaging the device. Pressing clothes down also improves weight distribution.
OPERATION
Note : After plugging in the plug, the drum may rotate very slowly for 10 seconds, even if you have not switched on the unit. This is neither a defect nor a safety risk as the drum rotates very slowly. This is caused by any residual voltage in the built-in capacitor.
CLEANING AND CARE
- After use, disconnect the plug from the socket.
- Tilt the appliance towards the drain and drain off any remaining water.
- Do not use abrasive cleaners to clean the plastic and metal parts. Do not use solvents or petrol.
- Do not rinse the appliance.
- Wind up the power cord after use.
- Use the handles to lift or transport the appliance.
- Never lift it by the drain or power cord.
- Keep the device in a dry, clean room.
Additional information
- Never use extension cords without an earthing cable.
- Always set the switch to the 0 position before disconnecting the plug.
- Never pull the power plug by pulling the cable. Always pull directly on the plug itself.
- Only use the appliance under supervision. Switch off the appliance if you have to leave the room.
- Never put sneakers, backpacks, teddy bears or similar products in the spin dryer.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom
