orb Mini Finger Dance Machine Instructions

orb Mini Finger Dance Machine

OVERVIEW

• Wireless Light Signal
  When the light is flashing the device is pairing, a constant bright light means device has paired successfully.

• Mobile Phone Holder
  To hold the mobile phone securely

• Controller Pad
  To select game TrOm main menu, press and release during game play.

• Select and return
  To enter the game and also return to the main game menu.

• Off/on
  Turns the device off or on.

• 5V In port
  Power device using a micro USB cable.
  Battery: 4 x AA

App Installation

Scan the code from the login card and it will redirect to the Android Play Store for Android, and the Apple store for TOS. Download the App to start. For first use, you will be prompted tor a login and password which will be tound Trom your login Cara, Eacn accounT WIT Support s deVIces only.

Pairing

1. Put 4 x AA batteries into the consoles battery compartment, or use the micro-USB to power on.
2. Turn on the dance machine, the light will begin flashing to start pairing.
3. Turn on your smartphone with your newly installed Mini finger dance app and open wireless for pairing.
   The dance machine will appear as ‘Mini Dance BLE then begin to pair. Once paired the light will light up and you
   are ready to play the game.

Battery Information:

Leakage of battery acid can cause personal injury as well as damage to this product, if battery leakage occurs thoroughly wash the affected skin and clothes. Keep battery acid away from your eyes and mouth. Leaking batteries make popping sounds.

• Batteries should be installed and replaced only by an adult.

• Do not mix used and new batteries (replace all batteries at the same time).

• Do not mix different brands of batteries.

• We do not recommend using batteries labelled ‘Heavy Duty’, ‘General Duty’, ‘Zinc Chloride’ or Zinc Carbon’.

• Do not leave batteries in the product for long periods of non-use.

• Remove batteries and store them in a cool, dry place when not in use.

• Remove depleted batteries from the unit.

• Do not put the batteries in backwards. Make sure that the positive (+) and negative (-) ends are facing in the correct direction. Insert the negative ends first.

• Do not use damaged, deformed or leaking batteries.

• Do not recharge non- rechargeable batteries.

• Remove rechargeable batteries from the device before charging.

• Dispose batteries only at the government approved recycling facilities in your area.

• Do not short circuit battery terminals.

• Tampering with your device can result in damage to your product, void of warranty, and could cause injuries.
  Warning: CHOKING HAZRD small parts. Not suitable for children under 36 months.
  The restriction accompany the age warning.

• Adapter for use with the device requires: DC 5V, 250mA.Only use an adapter that meets the device’s requirements.

• The adapter in not a toy.
  Adapters used with the device are to be regularly examined for damage to the cord, plug, enclosure and other parts.

THIS SYMBOL MEANS THAT USED ELECTRICAL AND ELECTRONIC PRODUCTS5 SHOULD NOT BE DISPOSED OF WITH GENERAL HOUSEHOLD WASTE. THERE ARE SEPERATE COLLECTION SYSTEMS FOR USED ELECTRICAL AND ELECTRONIC PRODUCTS IN ACCORDANCE WITH LEGISLATION UNDER THE WEEE DIRECTIVE ANI |IS EFFECTIVE ONLY WITHIN THE EUROPEAN UNION. PLEASE CHECK WITH YOUR |LOCAL AUTHORITY FOR RECYCLING ADVICE.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital devicem pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occue in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this devices may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

• Head Office- Magnum Brands Group (UK) Ltd, Unit L, Braintree Industrial Estate Ruislip, Middlesex, HA4 OEJ, UK. T: 0845 466 8880. [email protected]. www.Magnumbrands.com.

• EU-Magnum Brands (EU) Ltd, Herbert House, 18-22 Pembroke road Dublin 4 T: 016680125. [email protected].
  www.Magnumbrands.com

• USA Magnum Brands Group USA, Unit L, Braintree Industrial Estate, Ruislip Middlesex, HA4 OEJ, UK. T: 0845 466 8880. [email protected]. www.Magnumbrands.com

• Designed in London by Magnum Brands Group Ltd.
  Ruislip, HA4 0EJ, UK
  www.magnumbrands.com
  Visit www.orbaccessories.com for more exciting products

PLEASE MAKE SURE ALL FONTS HAVE BEEN OUTLINED, AND ALL IMAGES EMBEDDED.

Documents / Resources

| orb Mini Finger Dance Machine [pdf] Instructions
ORFINGDNCE, 2ARNXORFINGDNCE, Mini Finger Dance Machine, Mini Finger Dance Machine
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>