NewSound WA801 Primo Hearing Aid User Manual

NewSound WA801 Primo Hearing Aid

Know about the hearing amplifier and accessories

Hearing amplifier

Charging base Slim tube option kits

Earhook option kits

How to assembly and wear the devices

Assembly of earhook option (Tips: Provides more amplification.)

• Step 1 Select dome and press firmly onto the sound tube connector.
• Step 2 Insert the dome into the ear canal. Measure and mark a spot 3mm above where the tip of the ear hook and tube meet.
• Step 3 Cut the tube just above the marked spot.
• Step4 Complete assembly by inserting the tip of ear hook into the cut end of the tube.

How to wear with earhook

• Step 1 Insert the dome.
• Step 2 Place the housing over the ear.
• Step 3 Adjust to the most comfortable possition.
• Step4 Final fit position.

How to assembly and wear the devices

Assembly of slim sound tube (Tips: Provides more invisible fitting.

• Step 1 Choose a dome.
• Step 2 Press firmly onto the sound tube commec- tor.
• Step 3 Screw the assembled tube onto the connec- tor of hearing instrument body.
• Step 4 Complete assembly.

How to wear with slim tube

• Step 1 Insert the dome.
• Step 2 Place the housing over the ear.
• Step 3 Place the retention lock.
• Step 4 Final fit position.

How to charge the devices

Please read this user manual carefully before use. nThis user manual only applies to the wireless charging hearing aid series.

• *  **Step 1: Connect the power**

  •  Plug the smaller end into the charging port of the base.
  • Plug the larger end with the provided adaptor
  •  Plug the adaptor into a power outlet.
  • Step 2: Open the charging case****

• Step 3: Place the hearing instrument
  •  The end with dome of the instrument face and near the ight for better sterilization.
  •  Place the instrument in each sides of the crossbar in the case.
• Step 4. Close the case to start charging
  •  The transmitting end automatically detects the hearing aid placed on the charging area of the case via Bluetooth. The detection time is 5-10 seconds.
  • Once detected, the light will shine blue and system start charging and along with dryıng.
  •  Close the case.

How to use

• How to use the App
  • Connecting of the SOUNDWEAR App with your smart devices will optimize the device functions. Please refer to your App user manual.
• ON-OFF switch
  • The Memory switch also functions as ON-OFF switch. Press and hold the memory switch button for 3 seconds to turn on and off.
• Memory switch
  • To change listening programs, press the program switch button, or operate on your App Beeps will indicate a program change.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

•  this device may not cause harmful interference, and
•  this device must accept any interference received, including interference that may cause undesired operation

RF exposure requirements.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>