dji CP.OS.00000122.01 Pocket 2 Do-it-All Handle User Guide
- June 5, 2024
- DJi
Table of Contents
dji CP.OS.00000122.01 Pocket 2 Do-it-All Handle
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMOTM product. Please read this entire document and all safe and lawful practices DJI OSMO provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree to use this product only for purposes that are proper. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI OSMO accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product.
OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as “DJI OSMO”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI OSMO with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI OSMO. This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO. For up-to-date product information, visit http://www.dji.com and click on the product page for this product. This document is available in various languages. In the event of divergence among different versions, the English version shall prevail.
Introduction
DJI Pocket 2 Do-It-All Handle comes with a wireless image transmission,
wireless audio, and microphone features. With the 3.5 mm audio port and 1/4”
screw hole on the handle, it can be used with a microphone and micro tripod as
well. 
- DJI Pocket 2 Handle Port
- Lock Switch
- Status LED
- USB-C Port
- Speaker
- 1/4” Screw Hole
- 3.5 mm Audio Port
Usage
Specification
| Model: | OT-212 |
|---|---|
| Operation Frequency: | Wi-Fi:2412-2462MHz 5745-5825MHz |
Bluetooth/GFSK: 2402-2480MHz
Transmitter Power (EIRP):| Wi-Fi: 2.4 GHz: 27.42dBm(FCC) , <19 dBm (CE/SRRC/MIC)
5.8 GHz: <23 dBm (SRRC) , <14 dBm (CE) ,19.45dBm(FCC) BLE: 1.32dBm
GFSK: <13 dBm (SRRC), <10 dBm (CE/MIC) ,10.47dBm(FCC)
Operating Temperature:| 0° to 40° C (32° to 104° F)
5.8 GHz is not supported in some regions. Observe the local laws and regulations.
Compliance Information
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
SAR tests are conducted using standard operating positions accepted by the FCC/ ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output.
Before a new model device is available for sale to the public, it must be tested and certified to the FCC/ ISEDC that it does not exceed the exposure limit established by the FCC/ ISEDC, Tests for each device are performed in positions and locations as required by the FCC/ ISEDC. For Handheld operation, this device has been tested and meets the FCC/ ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal. Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.
ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.
EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com /euro-compliance EU contact address:
DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Environmentally-friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>