ION IPA129 Wireless All Weather Rechargeable Speaker User Guide
- June 5, 2024
- ION
Table of Contents
Wireless All Weather Rechargeable Speaker
User Guide
For the full User Guide, latest information about this product and product
registration, visit ionaudio.com.
For additional product support, visit
ionaudio.com/support.
Box Contents
Sport Power Cable
Microphone with Cable
Quickstart Guide/Safety & Warranty Manual
Outdoor Use and Care
Though Sport is water-resistant and able to tolerate splashing water, please review the tips below to get the best performance from Sport:
- Sport must only be used outdoors with power outlets or extension cords that are rated for outdoor use. Please do not connect the power cable to Sport in a wet environment. Make sure the power input, power cable, and power outlet are all completely dry before making any connections.
- Please do not place Sports in standing water, and bring Sports indoors during extreme weather.
Rechargeable Batteries
-
Fully charge the battery prior to first use.
-
Charge the battery completely after each use. It is acceptable to leave Sport plugged in; this will not overcharge the battery. Sport does not need to be powered on to charge the battery.
-
The battery icon blinking on the Display means that the battery is charging. When fully charged, all segments of the battery icon will be lit without
blinking. When the power cable is disconnected, the battery icon shows the current level of the battery. -
For best product longevity, do not store at exceedingly hot (greater than 90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures. If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity.
Features
-
Power Button: This button turns Sport on or off.
-
Bluetooth Button: Press and release the Bluetooth button to pair to a Bluetooth device or disconnect a paired Bluetooth device. See below to learn more.
-
Link: Press and hold this button to start stereo linking to another Sports speaker. Once the link has been established, the LINK should appear on the Display. Select which unit will be the primary speaker by pressing and releasing its Bluetooth button. Use this speaker for pairing with a Bluetooth device or selecting a radio station. The primary speaker will play left channel audio, and the secondary speaker will play right channel audio. To disconnect the link between the two speakers, double-press the Link button.
-
Radio Selector: This button sets the radio to FM, AM, or turns the radio off.
-
Bass Boost: Press this button to enhance the overall bass frequency response.
-
Tune/Track Buttons: Press and release these buttons to tune in a radio station or go to the previous/next track on a Bluetooth-connected device. To “seek” (jump to the next available radio station), hold either button down for a few seconds.
-
Play/Pause / Preset: Press to play or pause a track from a connected Bluetooth device.
In Radio Mode, press and release this button to select a previously saved preset station. To save the current station as a preset, press and hold this button, use the Tune/Track buttons to select which preset you want to save it to, and press this button again to confirm. -
Display: This screen shows information relevant to Sport’s current operation. See the full User Guide to learn more.
-
Volume Control: Press this push encoder to toggle between controlling the music volume and controlling the microphone volume. Turn the encoder to increase or decrease the volume.
-
Auxiliary Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3 player, or another audio source.
-
Microphone Input: Connect a microphone to this 1/4” (6.35 mm) mono input.
-
USB Charging Port: Connect your device’s charge cable here to charge it. USB charging-only functions when the unit’s power is turned on.
Pairing with a Bluetooth Device
1. Make sure the speaker is within range of your Bluetooth device (no more
than 100 ft. / 30.5 m away).
2. Press and release the Bluetooth button on the speaker.
3. Navigate to your Bluetooth device’s setup screen. Then find and select
Sport. If your Bluetooth device prompts for a pairing code, enter 0000.
Note: If you have previously connected to your Bluetooth device, Sport will
reconnect automatically.
Tip: Double-press the Bluetooth button to enable or disable the Bluetooth
pairing voice prompts.
To disconnect a paired Bluetooth device, press and release the Bluetooth
button.
App Control
IMPORTANT: To ensure the best possible experience with the app, use the
most current Android OS or iOS on your device.
Note: Ensure that your device has internet access via your service
provider or wireless connection. You can also download the app on your
computer, but remember to connect and sync your device to transfer the app.
Follow these steps to download the free app on your device:
- Open the Apple App Store or Google Play on your device. Then Search for the ION Sound XP app.
- Follow the on-screen instructions to download and install the app. Once downloaded, the ION Sound XP app will appear on your device’s home screen.
Safety & Warranty Information
Product Warranty
(for products purchased in the U.S.A.)
-
What is covered and for how long?
All Products: ION Audio, LLC (“ION Audio”) warrants to the original purchaser that ION Audio products and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized ION Audio dealer and continuing for the following period of time after that date for ninety (90) days. ION Audio warrants factory-refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from the original date of retail sale. This refurbished merchandise warranty is not transferable. -
What is not covered?
This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited Warranty does not cover: (a) damage caused by improper installation or improper connection to any peripheral; (b) damage caused by an external electrical fault; (c) damage from use of parts not manufactured or sold by ION Audio; (d) product purchased from anyone other than an ION Audio authorized dealer; (e) modifications to the product not approved in writing by ION Audio; (f) equipment that has the serial number removed or made illegible; (g) normal cosmetic and mechanical wear; (h) damage or loss during transit to an Authorized ION Audio Repair Center; or (i) units that are purchased and/or located outside of the continental USA. -
What are ION Audio’s obligations?
During the applicable warranty period, ION Audio will repair or replace, at ION Audio’s sole option, without charge to the purchaser, any defective component part of the product. To obtain service under this Limited Warranty, the purchaser must first contact ION Audio and obtain a return merchant authorization (“RMA”) number. The purchaser must then return the product to ION Audio in an adequate container for shipping, accompanied by the purchaser’s sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller’s name and address. To obtain an RMA number and assistance on where to return the product, contact ION Audio customer service at 401-658-3743. Upon receipt, ION Audio will repair or replace the defective products. ION Audio may, at ION Audio’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product. Repaired products will be warranted for a period equal to the remainder of the original Limited Warranty on the original product or for 90 days, whichever is longer. All replaced parts, components, boards, and equipment become the property of ION Audio. If ION Audio determines that any product is not covered by this Limited Warranty, the purchaser must pay all parts, shipping, and labor charges for the repair or return of such product. -
What are the limits on ION Audio’s liabilities?
THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING ION AUDIO PRODUCTS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ION AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER’S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ION AUDIO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO ION AUDIO’S OWN NEGLIGENCE, EVEN IF ION AUDIO OR THEIR AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR ION AUDIO PRODUCTS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES THE PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH THE PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates the risk of product failure between the purchaser and ION Audio, and ION Audio’s product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of ION Audio are not authorized to make modifications to this Limited Warranty or make additional warranties binding on ION Audio. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by ION Audio and should not be relied upon. -
How does state law apply to this warranty?
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO THE PURCHASER.
This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to another.
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Go to our website ionaudio.com to register your product with us.
Model:
Purchased From:
Serial Number:
Date of Purchase:
For warranty information for products purchased outside the U.S.A, visit: ionaudio.com/warranty
Return Information
- A return merchant authorization number must be obtained from your local ION Audio representative. For your representative go to ionaudio.com.
- A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.
- The faulty equipment must be packed in its original packaging.
- One additional outer layer of the packaging must be included to ensure product safety. Failure to do so may inadequately protect the equipment in transit and therefore jeopardize the warranty.
- ION Audio will not accept COD shipments and no call tags will be issued for the merchandise return.
- ION Audio will not return repaired merchandise to customers by priority service except by written request at the customer’s cost. Requests must be submitted in writing with the returned merchandise.
- The defective ION Audio equipment should be sent freight prepaid with the return merchant authorization number printed clearly on the outer packaging and the original sales receipt enclosed to your local service center.
ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other
countries.
World Headquarters: inMusic Brands, Inc. / 200 Scenic View Drive / Cumberland,
RI 02864 / USA / Tel: 401-658-5766
/Fax: 401-658-3640
Important Safety Instructions
- Read and keep these instructions. Heed all warnings and follow all instructions.
- Water and Moisture (if applicable): This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
- Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- (If applicable) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
- Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
- Caution: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc. (This applies only if your product uses a battery.)
- Protective earthing terminal (if applicable): The apparatus should be connected to a main socket outlet with a protective earthing connection.
- For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to the electrical earth.
- Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with “Class II Wiring” requires Class II wiring installed by an instructed person or the use of readymade leads or cords.
- This apparatus is for professional use only. Intended operational climate: moderate.
- Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.
- Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
- Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.
- As an electrical appliance, this device must be turned on and checked after a long period of non-use for maintenance purposes.
Safety Notices
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
DANGEROUS VOLTAGE: The lightning flash with the arrowhead symbol within
the equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS: The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying this
appliance.
WARNING: To reduce the risk of fire or electrical shock, do not expose
this appliance to rain or moisture. Electrical equipment should NEVER be kept
or stored in damp environments.
WARNING: The mains plug or appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or
modifications not expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: (a) reorient or relocate the receiving antenna; (b) move
this unit; (c) increase the separation between the equipment and receiver; (d)
connect the equipment into an outlet on a circuit different from that to which
the receiver is connected; (e) be sure that all cables are properly shielded,
using a choke or ferrite where appropriate; (f) consult the dealer or an
experienced radio/television technician for help. This device complies with
Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
RF Warning Statement: The device has been evaluated to meet the general
RF exposure requirements.
For Canadian Models: This device contains license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development (ISED) Canada’s license-exempt RSS(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may
cause undesired operation of the device.
Warning: Do not ingest the battery—chemical burn hazard. The remote
control supplied with this product contains a coin/button-cell battery. If the
coin/button cell battery is swallowed, it can cause severe internal burns in
just 2 hours and can lead to death. Keep new and used batteries away from
children. If the battery compartment does not close securely, stop using the
product and keep it away from children. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate medical
attention.
Technical Specifications
Water Resistance Class: IPX5
Output Power: 65 W (peak)
Frequency Response: 44 Hz – 18kHz (±3 dB)| Drivers: Low-Frequency: 6.5” /165
mm woofer; HighFrequency:2.0” / 50mm tweeterMicrophone
Type: Dynamic microphone| Radio Frequency Range (US):
87.5–107.9 MHz (FM);
520–1710 kHz (AM)
USB Charging Port: 5 VDC, 1 A| Battery: Life: Up to 50 hours;
Charge Time: 4 hours; Type: 12 V, 2.8 Ah, SLA
Power: Connection: IEC; Input
Voltage: 100–240 VAC, 50/60 Hz| Dimensions (WxDxH):
12.8” x 9” x 13” /
326 x 229 x 330 mm
Weight: 13.7 lbs. / 6.2 kg
---|---|---|---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>