logitech Prime Wireless Mouse Installation Guide

logitech Prime Wireless Mouse

PRIMED FOR VICTORY

Your new mouse is the result of our unyielding pursuit of perfection for over 15 years. We poured our hearts into creating the best possible gaming mouse by pushing the boundaries of performance through precision, comfort, and durability. Prime Wireless is our glory; now go chase yours.

STEELSERIES ENGINE

To enjoy GameSense integration, program macros, and customize lighting effects and other mouse settings on your new Prime Wireless mouse, download SteelSeries Engine at steelseries.com/engine

PACKAGE CONTENTS

• Prime Wireless Mouse
• USB Type-C to USB Type-A Cable (6’10” / 2.08 m)
• Extension Adapter
• USB Type-C Dongle
• Product Information Guide

SYSTEM REQUIREMENTS / COMPATIBILITY

• PC
• Mac
• Xbox

STEELSERIES ENGINE SOFTWARE REQUIREMENTS

• Platforms
• Windows 7+
• Mac OS X 10.13+
• 160 MB of free hard drive space for installation

PRODUCT OVERVIEW

1. Split Trigger Design Main Mouse Buttons
2. Scroll Wheel
3. Side Buttons
4. USB Type-C to USB Type-A Super Mesh Data/Charging Cable
5. USB Type-C Wireless Dongle
6. Extension Adapter
7. Virgin Grade PTFE Mouse Feet
8. CPI Button
9. Power Switch
10. TrueMove Air Sensor

SETUP

CONNECTING VIA 2.4 GHZ WIRELESS

CONNECTING VIA CABLE

To further customize your mouse or re-pair a Wireless Dongle 5, download SteelSeries Engine software from steelseries.com/engine

CPI BUTTON FUNCTIONS

CPI VALUE

Quick press the CPI Button 8 to change the CPI level. A solid color will appear on Scroll Wheel 2 for three seconds to signify the CPI level.

• Level 1 400 CPI Purple
• Level 2 800 CPI Blue
• Level 3 1200 CPI Green
• Level 4 2400 CPI Yellow
• Level 5 3200 CPI Red

POLLING RATE

Long press the CPI Button 8 to change the polling rate once. A flashing color will appear on Scroll Wheel 2 for three seconds to signify the polling rate level. Long press again to cycle through polling rates.

• Level 1 1000 Hz Red
• Level 2 500 Hz Yellow
• Level 3 250 Hz Green
• Level 4 125 Hz Blue

FACTORY RESET

• Press and hold the CPI Button 8 and both Mouse Buttons 1 together for five seconds.
• The Scroll Wheel 2 will flash pink three times before all settings will be reset to the factory settings.

BATTERY LEVEL INDICATOR

During use, the mouse will flash red when 5 % or less battery remains. When turning on or waking from sleep, the mouse will flash a color to indicate the remaining battery level:

• Red: 0–5 % battery
• Yellow: 6–10 % battery
• Green: 11–100 % battery

When charging, the lighting will flash green for 5 seconds before resuming default lighting.

REGULATORY

Europe – EU Declaration of Conformity

Hereby, SteelSeries ApS. declares that the equipment is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/ EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: https://steelseries.com/

Operating Temperature: 0 to + 40°C.

SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that the shipping of our products to the EU territory complies with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.

Frequency bands and Powers (Mouse and Transceiver)

• Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
• Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
  • EIRP: л/4-DQPSK: 0.47 dBm (Mouse)
  • EIRP: л/4-DQPSK: 2.27 dBm (Transceiver)
• Firmware Version: V1.0.0

UK Declaration of Conformity

Hereby, SteelSeries ApS. declares that the following equipment which is in compliance with Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 issued by the Department for Business, Energy& Industrial Strategy. The full text of the UK declaration of conformity is available at the following internet address: https://steelseries.com/

WEEE

This product must not be disposed of with your other household waste or treat in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

TURKEY ROHS COMPLIANCE

• Republic of Turkey: In conformity with the EEE Regulation
• Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur

Safety Guideline for the Battery

This battery must not be disposed of with your other household waste or treat in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements, the device can be used in portable exposure conditions without restriction.

• FCC ID: ZHK-M00030 (Mouse)
• FCC ID: ZHK-M00030TX(Transceiver)

Frequency bands and Powers (Mouse and Transceiver)

• Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
• Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates
  • Conducted Peak Power/л/4-DQPSK: -0.88 dBm(Mouse)
  • Conducted Peak Power/л/4-DQPSK: -0.54 dBm (Transceiver)
  • Conducted Peak Power/GFSK: 0.89 dBm
• Firmware Version: 1.0.0

Industry Canada Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference.
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. The appliance must not be exposed to splashes or drops of water and it should not be used as a support for any object filled with liquid, such as a vase.

Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction.

CAUTION: RISK OF EXPLOSION IF THE BATTERY PACK IS NOT REPLACED BY THE SAME TYPE AS SPECIFIED BY THE MANUFACTURER.

Please keep follow all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.

1. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
2. Please keep this battery pack away from fire and high heat sources due to the explosion that might happen. Do not place your battery pack close to any heater or hot location.
3. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
4. This battery pack shall not be exposed to moisture, dripping or splashing.
5. If any electrolyte flows out of this battery pack when touching the user’s eyes and skin, please seek medical advice immediately.

IC: 9638A-M00030 (Mouse)
IC: 9638A-M00030TX (Transceiver)

The RoHS test method is based on the standards JIS C 0950 and CNS 15663.

CONTACTS

More information and support at steelseries.com

• Product Name: Wireless Mouse
• Model No: M-00030
• Rated: 5V 500 mA

learn more at steelseries.com

References

• Official Site - For Glory | SteelSeries
• Official Site - For Glory | SteelSeries
• Engine | SteelSeries
• Gaming Accessories | SteelSeries
• Prime Series | Competitive Gaming gear developed by Pros | SteelSeries
• Official Site - For Glory | SteelSeries

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>