Yuming Enterprises YM6090 Wireless Charging Pad Instructions
- June 5, 2024
- Yuming Enterprises
Table of Contents
Yuming Enterprises YM6090 Wireless Charging Pad
SPECIFICATIONS
- Device Case Thickness: up to 1/4”
- Temperature Range: 32°F to 113°F
- Charge Modes: 5W, 7.5W, 10W with compatible device and power supply
| Power Output | Device Requirements | Power Supply |
|---|---|---|
| 5W | Wireless charging compatible | 5V, 2A |
| 7.5W | iPhone 8 or newer | QC 2.0 or better fast charging adapter |
(9V, 1.67A)
10W
| Samsung Galaxy Note 8/S8 plus or other devices that supports 10W wireless charging
SAFETY INFORMATION
- Use as intended only.
- Keep metal objects away from charging pad at all times.
- Keep indoors and dry. Do not expose to water or other liquids..
- Do not expose to temperatures below 32°F or above 113°F.
- Do not use as drink coaster.
- Do not place a device on this item that does not support wireless charging.
- This product is not a toy. Do not allow children to play with charger.
- Inspect before every use; do not use if parts are loose, cracked, or damaged.
- Do not open the housing of the charger pad.
OPERATION INSTRUCTIONS
IMPORTANT:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
document including all text under subheadings there in before set up or use of
this product.
-
Connect the USB cable from the inlet on the Charging Pad to a power adapter or another device that can supply USB power. The Indicator will light to indicate power is connected.
Note: The power supply must support fast charging as noted on the facing page if that is desired. -
Center device on top of Charging Pad. The indicator will show blue while charging.
-
If the indicator does not show blue, make sure that the device is properly centered and is compatible with wireless charging.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter This device must operate
with a minimum distance of 20 cm between the radiator and user body.