cecotec Surface Precision ecoPower 10000 Healthy Personal Scales Black Instruction Manual
- June 3, 2024
- cecotec
Table of Contents
cecotec Surface Precision ecoPower 10000 Healthy Personal Scales Black
Instruction Manual
SAFETY INSTRUCTIONS
- Read these instructions thoroughly before using the appliance.
- Keep this instruction manual for future reference or new users.
- This device is designed for personal use only and is not suitable for commercial or industrial use.
- Do not leave children and animals unsupervised with the device and keep the packaging material away from them in order to prevent suffocation.
- Do not operate this appliance if there are any visible signs of damage. Always check for damage before each use and in case of malfunction, contact the Technical Support Service of Cecotec.
- Keep the device away from electromagnetic fields (mobile telephones, remote controls, etc.). Measurement accuracy could be affected.
- Keep the device away from heat sources.
- Do not use the device outdoors.
- 6.Do not expose the device to extreme temperatures, moisture, wet conditions or direct sunlight.
- Keep water and other liquids away from the device.
- Wide temperature variations could cause condensation. In this case, allow the device to go back to room temperature before use.
- Do not drop the device or jump on its measuring surface.
- Do not stand on the scale with wet feet and make sure the measuring surface and the surface underneath is dry.
- Do not stand on the edge of the scale.
- Do not use caustic or abrasive cleaning materials to clean the device, this could damage the surface.
PARTS AND COMPONENTS
Fig. 1
- LCD display
- EcoPower push button
- High-security tempered glass platform
- Measuring unit push button
- High-precision sensor
BEFORE USE
Take the device out of its package and remove all packaging material.
Check carefully if there is any damage. If there is, immediately notify the
Technical Support Service of Cecotec.
OPERATION
Fig. 2
Place the device on a solid, dry and flat surface (avoid carpets). Uneven floors will result in inaccurate measurement results.
Gently stamp on the push button, this will automatically generate battery. Wait until “0.0” is displayed.
The scale will automatically turn off after 1 minute.
Note: Do not step on the scale until “0.0” is displayed.
Fig. 3
Error indication:
“Err” will indicate overload, when more than 180 kg are places on the scale.
Fig. 4
When a battery icon appears next to the digits in the display, the scale will turn automatically off after a few seconds due to low battery. Simply stamp on the push button again to generate more power.
Fig. 5
Unit switch:
The display will show “Kg” or “Ib” below the battery icon, indicating which
measuring unit is being used at that moment. Press the unit button to switch
from one unit to another.
Note: The unit must be changed before stepping on the scale, not during weighing.
TECHNICAL SPECIFICATIONS
04250 Surface Precision EcoPower 10000 Healthy White
04251 Surface Precision EcoPower 10000 Healthy Black
Equipped with high-precision strain gauge sensor system.
Capacity: 180 kg/396 lb
No. of units: Kg-lb
Mini effective weight: 8 kg
5-mm tempered safety glass platform
Automatic power generation control
Battery-free technology
Auto zero resetting/auto power off
Low battery/overload indicator
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly. Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
TECHNICAL SUPPORT AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long
as the proof of purchase is submitted, the product is in perfect physical
condition, and it has been given proper use, as explained in this instruction
manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it,
misused, beaten, exposed to moisture, immersed in liquid or corrosive
substances, as well as any other fault attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not
authorised by the official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for
2 years, based on current legislation, except consumable parts. In the event
of misuse, the warranty will not apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
Grupo Cecotec Innovaciones S.L.
C/ de la Pinadeta s/n, 46930
Quart de Poblet, Valencia (Spain)
YV01191231