EZDS Z7 Automotive Diagnostic Scan Tool User Guide
- July 10, 2024
- EZDS
Table of Contents
Z7 major port and power
input information for
product certification
( Automotive Diagnostic Scan Tool )
Diagnostic Terminal for the Z7
○ Image of the diagnostic terminal and charging cradle
○ Configuration and port name for the diagnostic terminal
○ Major Specifications for the Diagnostic Terminal
General Specification
Category| Specifications
CPU| Octa Core Processor 2.2 GHz
Operating System| Android 11
System Memory| RAM 4G / Internal Flash 64G
External Memory| Micro SD Card Slot
LCD| 10.1 inch FHD (1920 x 1200)
Input Devices| Capacitive Touch Screen, 3 Hard Keys (Power, Volume +,
Volume -)
Camera| 8 megapixel auto-focus with LED flash
Sound| Speaker, Microphone
Rechargeable Battery| Li-ion 3.85V, 5800mAh
Operating voltage| DC 5V
Sensors| Ambient Light, Gyroscope, Accelerometer
Dimension| 275 x 187 x 36 mm
Weight| About 1200g
Connectivity
Category| Specifications
External port| USB-A 1ea, USB-C 1 ea. HDMI 1ea
Network| RJ45 Ethernet, Wi-Fi 802.11 a/b/g/n, Bluetooth 5.0
Charging Cradle for the Z7
○ Configuration and port name for the charging cradle
○ Major Specifications for the Charging Cradle
General Specification
Category| Specifications
Operating voltage| DC 5V
Power Input Port Type| USB Type-C Connector
Power ouput Port Type| Battery Connector 4Pin(Ground 2ea, Power 2ea)
Plastic Color| Black
Dimension| 298 x 140 x 51 mm
Weight| About 868g
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with RF exposure requirement.
VCI Module for the Z7
○ The ports description for the VCI Module
Diagnostic Terminal & VCI Module with Vehicle
○ Full use configuration with diagnostic terminal and VCI connected.
(Expresses possible combinations depending on the situation)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>