REMAX P10 Hunyo Portable Wireless Bluetooth Tripod Selfie Stick User Manual
- June 5, 2024
- REMAX
Table of Contents
P10 Hunyo Portable Wireless Bluetooth Tripod Selfie Stick
User Manual
Usage method
-
Wireless pairing
Press and hold the Photo Button for seconds to enter wireless pairing mode. Turn on the wireless function on your phone and search. Then click to connect with the green light remaining on after successful connection. -
Phone holder
Place the stick face up and turn the holder on the back 90 downward to open. Then rotate the holder 180 horizontally -
Phone Fixing
Rotate the phone holder freely to your appropriate position and pull open the holder handle. Then fix your phone on it. -
Photo Taking
Before photo taking, please set the volume button on your phone as the shutter button Use the remote control to take photos. -
tripod Using (Optional)
The product includes a tripod. Open the tripod at the bottom and stretch the stick upward Place the stick on a flat surface for use
Separate Wireless Remote Control
Wireless range: 10m
There is a battery compartment at the bottom of the remote control. Please use
the battery (CR1632) required for the product.
Warranty Regulations
- Please keep the warranty card properly for the maintenance certificate
- The warranty period is within one year from the date of purchase
- During the warranty period, under the condition of proper usage and maintenance, if the material or function of the machine itself has any problems or malfunctions, after inspection, the company will provide free repair and replacement. The following cases will not be repaired free of charge
The company’s products are subject to a limited warranty within the warranty
period. Equipment malfunctions, damages, or any other failures that fall into
the following situations are not covered in the limited warranty, and the
company does not assume free warranty obligations: the equipment parts and
components being exceeded the warranty period; product malfunction or damage
caused by customers’ incorrect installation, storage, or usage of not being in
accordance with the requirement ts of the instruction; product malfunction
or damage Caused by disassembly by personnel who are not authorized by the
company, product malfunction or damage caused by accidental or man-made
reasons, including operating errors, scratches, transporting, collisions, the
input of inappropriate voltage and current, etc., product malfunction or
damage caused by such force majeure as natural disasters (earthquakes and
fires, etc.).’These pictures are for reference only, please refer to the
actual product
The company reserves the right of the final interpretation of this manual
WARRANTY FEEDBACK FORM(TICK OFF)
A. Button mal-function
B. Unable to pair another device
C. Can not recharge
D. Others
Buying time—————
Dealers of sale———–
Time of problems———
Users’ contact info———–
http://www.iRemax.hk
http://weixin.qq.com/r/1nX27mjEGjVlrSyN9yDE
Producer. REFINEINDUSTRIAL(ASIA)LIMITED
ShenzhenREMAXCo., Ltd all rights reserved
Manufacturer. ShenzhenREMAXCo., Ltd.
Address: No.8, HuaningRoad, Dalang.Longhua, Shenzhen, CN.
Service#Hotline:4006755178
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>