REMAX RB-M52 Alarm Speaker User Manual
- June 5, 2024
- REMAX
Table of Contents
REMAX RB-M52 Alarm Speaker
Buttons And Port
- Pause/cll
- Volume up / Next track
- 10TF Slot
- Alarm clock
- OClock
- Snooze/light
- Micro USB
- Mode
- 5Volume down / Previous track
- 9ON/OFF
- DLine in
Power On/ Power Off
- Power on: Slide the bottom ON/OFF button to the “ON” position, the device turns on, H1 will be displayed on the screen.
- The device will directly enter the BT search mode if there are no other audio accesses. If there are no audio access, TF card will be chosen as priority. If there is no TF card, the speaker will enter Aux mode.
- Power off: Slide the bottom ON/OFF button to the “OFF” position, the LED screen will turn off.
TE Card Mode
When insert the original TF card stored with music, the speaker will switch to TF card mode automatically, at the same time, the led screen and TF light will stay on.
Button Description
While playing music, long press the «/V- or >i/V+ button to decrease or increase the volume, short press the 144/V-or >i/V+ button to switch to last or next song.
AUX Mode
Insert the equipped line-in cable, the speaker will automatically switch to AUX mode, at the same time, the led screen and the AUX light will stay on.
Button Description
While playing music, long press the k«/v- or i/V+ button to decrease/increase the volume. It is ineffective to short press the /y-or iV+ button.
Clock Mode
- Short press the clock button to enter the “clock mode”, long press the clock button to set “hours”, and then short press the clock buttonto set “minutes”(long/short press the It4/v-or H/V+ to increase or decrease the number).Long press the clock button again to exit the setting or it will automatically exit if there is no other operation for 30 seconds.
Alarm Clock Mode
- Short press the alarm clock button to enter the alarm clock mode, it will automatically show the current alarm clock time once enter the alarm clock mode.
- Long press the alarm clock button to set “hours”, and then short press the alarm clock button to set “minutes”. And then short press the alarm clock button again to turn on/off the alarm clock(“ON” stands for the alarm clock turns on, “OFF” stands for the alarm clock turns off), long press the alarm clock again to store and exit setting. When the alarm clock turns on, the alarm clock symbol will be shown on the led screen.
- When the alarm clock rings, press any button except the light button soz to turn off the clock.
- Snooze function: when the alarm clock rings, press the top light button snoz to stop the ringing, the sleeping light on and the alarm clock rings again after 5 minutes, the alarm clock will be turned off after three times.
Mode Button Instruction
- When TF card and line-in cable both insert in the speaker, you can short press the “M” button to switch the mode. The sequence of modes will be TF card mode AUX mode Wireless connection Mode TF Card Mode.
- You can press the .button to turn on/off the led screen. Snooze
Power Saving Mode
- In any mode, the led screen will turn off if there is no operation over ten minutes. You can press any button to awaken the led screen, the power saving mode will be off when charging the speaker.
Charging/ Low Power Mode
When the speaker battery is of low power, the charging light on the led screen will blink, and the alarm sound will be heard at the same time. At this time, you need to charge the speaker by charging line, the charging light stays on while charging and will turn off once fully charged.
Wireless Mode
Connection instruction
When the “BT light” on the led screen flashes, which shows the device enters
the searching and pairing condition. At this time, you can turn on the BT of
your digital products to search “RB-M52”,when RB-M52 shows, you need to
connect it.
Prompt sound will be heard once “RB-M52” has been successfully connected, at
the same time, both of the led screen and light stay on.
(Note : The BT will be automatically connected if it was connected once)
Button Description
- While playing music, long press 144/V-or »i/V+ button to decrease or increase the volume, short press the e/v- or i/V+ Can switch to last or next track.
- When the phone connected the speaker successfully, double click the il” button can make a phone call to the last dialed out number, short press the ll button to answer the call, short press again to hang up the phone, long press the button to refuse the call.
- When the phone connected the speaker successfully, double click the il” button can make a phone call to the last dialed out number, short press the Hl button to answer the call, short press again to hang up the phone, long press the il button to refuse the call.
Warranty
This product is covered under warranty for a period of twelve months from the date of sale limited to normal use and maintenance of the machine parts, materials and functions. Problems and failures verified upon further identification, will be provided free repair.
in the box
This warranty does not apply
- To a product that is out of warranty;
- To damage caused by operating the product outside the permitted or intended uses described by WK;
- To a product that has been disassembled, repaired or refitted without the authorization of WK;
- warranty card and proof of purchase cannot be presented;
- damage caused by external causes and natural disasters, including earthquake, fire, etc.
Note. The warranty does not include product transport costs and does not provide on-site maintenance services.
Warranty feedback form (Tick Off)
- No sournd
- Unable to pair other device
- Can not recharge
- Sound quality deteriorate
- Button ma-function
- Others
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmfül interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/IV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>