TOTEM TOTPFFBJ73 KIN AMP Integrated Amplifier Owner’s Manual
- June 5, 2024
- TOTEM
Table of Contents
TOTEM TOTPFFBJ73 KIN AMP Integrated Amplifier
CONGRATULATIONS
We sincerely thank you for having granted Totem’s KIN AMP the special place in your living environment. These speakers are designed to redefine your musical understanding and open corridors of new experiences. We hope you not only enjoy but experience Totem as your guide to a new and rewarding listening environment! You will without a doubt experience a Totem moment.
OUR VISION
Created in 1987, Totem’s mission is to develop audio solutions capable of producing an involving performance that is true to the artist’s intention. Our goal is to provide designs that are affordable, cosmetically timeless, and invoke an emotional response. Music, movies, TV, and video games are accurately rendered with a powerful focus that is yet soul stirring. Discover yours today. Each speaker is a ‘piece de resistance’ that attests to the profound sound staging that can be reproduced by adaptable and innovative engineering. Listen and believe…
DISCOVERING THE KIN AMP
Designed by Totem Acoustic in Montreal, Canada, the KIN AMP was created to provide a simple yet remarkable audio solution. When paired with suitable speakers, the KIN AMP will ensure a musical, lifelike performance with not just ours but a wide variety of speakers. Bluetooth technology allows high resolution, wireless streaming from your favorite device. A wide selection of inputs allows the connection of all your other sources, from your gaming system to your turntable, and everything in between. You have discovered KIN AMP, and all the acoustic pleasure it provides. Totem Acoustic keeps to a strict quality control regimen and all factory-sealed products leave our facility in perfect condition. If there are any damages visible or concealed that has occurred in handling it must be reported immediately to your Authorized Totem Dealer. Carefully remove the speakers from the box and save all interior and exterior packaging for future use
IMPORTANT SAFTEY INSTRUCTION
-
Read instructions
Retain these instructions -
Heed all warnings
-
Follow all instructions
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including Amplifiers) that produce heat.
-
Do not defeat the safcty purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit vour outlet, consult an electrician for replacement of the obsolete outlet
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use atachments/accessories specified b the manufacturer.
-
use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, used caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled, or objccts have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
-
An appliance input coupler is used as the disconnect device-the disconnect device shall renmain readily operable.
ACCESSORIES INCLUDED
- Remote
- Power Cord
When packaged as a system with Totem speakers, accessories will also include:
- 2 x Speaker wire
- Optical cable
- 3.5mm cable
DISPLAY FUNCTIONS
- The Kin AMP display is touch capacitance. A gentle touch can control the volume and source selection, and when in standby mode, a touch to these same areas can turn on the Amplifier. The display disappears 1 minute after the last function from either the remote or touch display
- Main Display: Indicates Source or Volume, depending on which is being adjusted.
- Input Selector: Scroll through the various inputs with individual touches on the blue arrows. The input options are: BLUETOOTH: The setting to pair a device to Bluetooth OPTICAL: Digital Optical Input RCA / AUX1:
- Analog stereo RCA input, switchable between Line and Phono 3.5 mini / AUX2: Analog stereo 3.5mm/Mini Jack input
- Volume: Touch the left speaker icon to lower the volume and the right speaker icon to raise the volume. The volume maximum is 60.
- Totem Thunderbird Logo: Lights up when Power is on, disappears in standby.
- Headphone Output: Accommodates 3.5mm headphone jacks. Inserting headphones will mute the output to the speakers. Removing the jack will reengage out to the speakers. When in standby mode, the display can be activated by pressing any function on the remote or touching either the Input Selector or Volume sections of the display
REAR CONNECTIONS
- Aux 1
- You can connect this stereo analog input to the analog output of your TV, cable box, satellite, game, turntable, or whatever device you’d like to connect.
- Phono/Line
- For all modern electronics this should be left in the “Line” position. When connecting a turntable equipped only with a Phono output, set this to Phono.
- Ground
- This is used only with turntables equipped with a ground cable.
- Bluetooth Antenna
- The antenna captures the Bluetooth signal. Position it vertically for the strongest signal, but it can remain horizontal.
- Aux 2
- This 3.5mm input can be used with many portable devices and computers.
- Sub out
- This allows you to connect a Totem Acoustic powered subwoofer to your speaker to add thunderous bass and enhance the low frequency effect.
- Aux 3 Optical
- The digital Optical input, sometimes referred to as Toslink or SPDIF, allows the use of an optical wire from your TV, cable box, satellite, game, or whatever source you’d like to connect.
- Amp IN
- This input bypasses the internal preamplifier to facilitate connecting external streaming components. This is used primarily in custom installations.
- Speaker Outputs
- Connect the speaker wire from these outputs to the corresponding speakers. Be sure to maintain the polarity of the wire, keeping the positive and negative signals consistent to ensure best performance.
- Main Power
- This will turn the AMP on and off. Make sure to make all your connections before turning on the AMP. You only need to turn this switch on once, it will then go into standby mode when it is not in use.
- AC Input
- The supplied power cord connects here, plug the other side into a wall receptacle or power bar.
- Voltage Selector
- This selector can be manually switched between 115v and 230v, based on the voltage of where you live. The KIN PLAY will be set to the country’s voltage where it is sold. DO NOT CHANGE THE SETTING OR YOU WILL DAMAGE THE AMPLIFIER!
REMOTE CONTROL
- Power/Standby
- Previous Track (Bluetooth operation only)
- Play/Pause (Bluetooth operation only)
- Bluetooth Input Select
- Bluetooth Pairing
- Aux 1 : RCA Input Select
- Aux 2: Mini Jack Input Select
- Raise and lower bass
- Raise and lower treble
- Mute
- Next Track (Bluetooth operation only)
- Optical Input Select
- Reset: All tone settings are reset to original
- factory settings
- Raise and lower volume
SETTING UP THE KIN AMP
Connect the speakers using speaker wire. Be sure to respect the polarity of
the wire, connecting the RED (+) and BLACK (-) terminals from the AMP to the
speakers. Totem Tress wire, at any length, can demonstrably enhance bass,
clarity, and imaging. You are now ready to connect your sources.
CONNECTING A SUBWOOFER
A powered subwoofer can be easily added by connecting a single RCA cable from
the Sub Out on the KIN AMP to the Input on the subwoofer. This wire is not
included. Adding a Totem subwoofer will substantially add to the bass
capabilities of the system.
CONNECTING SOURCES
Use the appropriate audio cable to then connect your other sources. Totem has
supplied an Optical and Mini jack cable to cover most requirements. If you are
connecting a turntable, use the RCA inputs of Aux 1. If your turntable is
equipped with a ground wire as well, connect it to the grounding post on the
speaker. If the turntable has a built in Phono PreAMP, set the switch located
below the input to Line. If it does not, set it to Phono. ATTENTION: Be sure
to use the right setting and consult your turntable’s manual. Using the wrong
setting can damage your speakers and void the warranty. When you have
completed all your connections, connect the power plug from the AMP to the
wall socket and set the master power switch to ON.
AMP IN / CONNECTING A STREAMER
The AMP IN input bypasses the internal preamplifier so features like volume
and source select will not function. This facilitates connecting and the
functionality of external streaming components and is used primarily in custom
installations. It is a 3.5mm jack so if the streamer is not equipped with the
same output, use the proper adaptor as required. Once connected, the amp will
be controlled by the connected device
STANDBY AND AUTO ON
When no audio input has been detected for 60 minutes, the KIN AMP with go into Standby mode. It can automatically turn back on by playing the last source that was used. KIN AMP can be “woken” by pressing the standby button on the remote or the far left or right sections of the display.
BLUETOOTH PAIRING USING THE REMOTE
Turn on the KIN AMP and select the BLUETOOTH Input designated with the
BLUETOOTH logo on the remote. BLUETOOTH will appear in the display (see FIG
1).
Push Pair on the remote. PAIRING will appear briefly to indicate pairing mode
(see FIG 2). 
BLUETOOTH will reappear in the display, as in FIG
1, but will now be blinking. Turn on your Bluetooth device, go to the
Bluetooth settings, and let it find “Totem KIN AMP”/ Select the Totem KIN AMP
option and wait for your device to say connected. (see FIG 3) BLUETOOTH (FIG
- will stop blinking and the KIN AMP will emit a beep, indicating the pairing has been successful. You are ready to enjoy music wirelessly streamed via Bluetooth.
BLUETOOTH PAIRING ON THE DISPLAY
Turn on the KIN AMP and tap the input selector (indicated by the red arrow in fig 1) until you reach the BLUETOOTH input. Hold your finger on the input selector for three seconds until PAIRING is displayed. Turn on your Bluetooth device, go to the Bluetooth settings, and let it find “Totem KIN AMP”. Select the Totem KIN AMP option and wait for your device to say connected. (see FIG 3) BLUETOOTH (FIG 1) will stop blinking and the KIN AMP will emit a beep, indicating the pairing has been successful. You are ready to enjoy music wirelessly streamed via Bluetooth.
TROUBLESHOOTING GUIDE
-
No Sound
- Check to see if the MUTE setting has been engaged.
- Make sure the correct source has been selected.
- Verify that the AMP is powered up and speakers are properly connected.
-
No Power/No display:
- Verify the main power switch on the AMP has been turned on.
- Verify that the wall AC outlet is functional.
- Check to see the power cord is securely connected.
-
Cannot connect to Bluetooth
- Ensure the Bluetooth input has been selected.
- Confirm the AMP is in pairing mode.
On the Bluetooth device, turn the Bluetooth function on and off.
If the device doesn’t find the AMP in pairing mode, turn the speakers off and then on again.
-
Sound from one speaker only
- Verify the speaker wire is securely attached.
- Check the interconnects of the attached sources.
- Try a different source to see if the issue is common to all sources.
-
Remote Control Issues
-
Check to see if the transparent film separating the battery from the connections has been removed.
Be sure that you are within range (approximately 30ft). Aim the remote at the active speaker. -
Replace the battery.
-
-
Low Output
- Some sources can play louder than others, verify if all sources have the same output.
- Many sources, like phones or tablets, have their own volume controls. Ensure their volumes are set to higher levels.
- See if both speakers are playing.
-
Distortion, Poor Quality
- Verify the polarity of speaker connections. Incorrect connections cause a lack of bass and image.
- • Bass and treble setting might be misadjusted, push the reset button on the remote.
- Sources must be set to stereo, not a surround effect like Dolby or DTS.
-
No Subwoofer Output
- Verify that the wire is securely connected.
- Make sure that the proper input is being used on the subwoofer.
- If the subwoofer is on and properly connected, increase its volume.
-
Poor Turntable output
- Determine if you are using the proper Line or Phono selection.
- Separate the speakers farther away for the turntable.
- Try further isolating the turntable, preferably on a separate shelf.
SPECIFICATION
- Amplitier Type Class D
- Power Output @40hm: 2x 100w RMS @THD=1%
- Total Harmonic Distortion: <0.1% @ 30K Filter / 1W
- Signal to Noise Ratio: >86dB
- Frequency response 20Hz- 2OkHz +-3dB
- Wireless Connectivity: Bluetooth 4.1 apbxHD
- Analog Inputs: Stereo RCA switchable between Phono and Line Level
- Mini jack (3.5mm)
- Digital Inputs: Optical
- Bypass: Analog 3.5mm input
- Outputs: Subwoofer Out 20-220Hz @3dB, 3.5mm headphone jack
- ACcessories: Remote Control
- Dimensions (WxHxD): 10.03″ x 2.36″ x 9.25″/ 255 x 60 x 235mm
- Weight: 5.31b/ 2.4kg
- Bluetooth Sampling Rate: 8kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24kHz, 32kHz, 44.1 kHz, 48kHz
- Optical In Sampling Rate 192kHz/24bit
- Decoding: MP2/MP3, WMA, FLAC(8/16/24bit), AACIMP4/M4A, WAV (IMA-ADPCM and raw PCM), AlF, AIFC
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Totem Acoustic Inc. is under license. Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission. This appliance is labeled in accordance with European Directive 2002/96/ EC concerning waste electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.
TOTEM LIMITED WARRANTY
Please register online at www.totemacoustic.com within two weeks of the purchase date. The Totem speakers must be purchased from a TOTEM AUTHORIZED DEALER. Keep your original bill or receipt obtained from your Totem Authorized Dealer. Retain the sturdy carton and all packing material; all warranty repairs are required to be shipped in their original packaging. This ensures no damage during transportation. All Totem products are created with the utmost care and quality in mind. If ever a problem should arise, Totem’s Amplifiers are covered by a two (2) year limited warranty starting from the date of purchase. The Totem limited warranty applies to products in normal home use only. The warranty is void if serial numbers have been altered or removed. The warranty is void if products show signs of abuse. The warranty is void if the products have been tampered with. We reserve the right to any future change or modification without notice. For further assistance, contact your TOTEM AUTHORIZED DEALER or visit the Warranty Section of the Totem website at https://totemacoustic.com/warranty/
PRODUCT REGISTRATION
We very much would appreciate if you took the time to register your product
online. Product registration leads to quicker assistance and more efficient
support in the rare case that your speaker should have a problem. This can be
done quickly and easily in the support section of our site:
https://totemacoustic.com/register-your-product/
Follow and Like us on Facebook:
https://www.facebook.com/totemacoustic/
References
- Totem Acoustic | High Performance Speakers Made In Canada
- Totem Acoustic | High Performance Speakers Made In Canada
- Register Your Product - Totem
- Warranty - Totem
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>