Nedis SLNVR201CWT Smart Wireless NVR Security Set User Manual
- June 5, 2024
- nedis
Table of Contents
SLNVR201CWT Smart Wireless NVR Security Set
User Manual
Preface
Thank you for purchasing the Nedis SLNVR201CWT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
This product is exclusively intended as a smart wireless security system.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Smart Wireless NVR Security Set
---|---
Article number
|
SLNVR201CWT
Dimensions (l x w x h)
|
200 x 200 x 192 mm
Weight
|
528 g
Power input
|
220 – 230 VAC ; 50 – 60 Hz
Operating temperature
|
-20 °C – 50 °C
Operating humidity
|
10 % – 90 % (RH)
Memory
|
Micro SD card (8 – 128 GB) (not included)
Resolution
|
1920 px – 1080 px
Frame speed
|
15 fps
Image sensor
|
1/2.9” Color CMOS
Video compression
|
H.265
Photo size
|
.jpeg
Diagonal viewing angle
|
100 °
Frequency range
|
2412 – 2452 MHz
Max. transmit power
|
18 dBm
Max. antenna gain
|
5 dBi
IP rating
|
IP65
Main parts (image A)
A
1. Antenna
2. Base station
3. Hard disk cover
4. Ethernet port
5. VGA output
6. HDMI output
7. USB port (2x)
8. DC power port
9. Drilling template (2x)
10. Plug (6x)
11. Screw (6x)
12. Hard disk bolt (4x)
13. HDD LED
14. Running LED
15. Power LED
15. Bracket
16. Camera (2x)
17. Speaker
18. Microphone
19. Lens
20. Photosensitive sensor
21. DC connector
22. Pairing button
23. Mouse
24. Ethernet cable
25. Power cable (3x)
User interface software (image B)
B
1. Reload/login icon
2. QR-code
3. Right-click menu
4. Signal strength of the connected camera
5. Mute/unmute
User interface app (image C)
C
1. Menu
2. Playback
3. Message
4. Albums
5. Settings
6. Mute/unmute
7. Screenshot
8. Security camera speaker
9. Record video
10. Full screen
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- Do not expose the product to water or moisture.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Only use the provided power cable.
- Disconnect the product from the power source and other equipment if problems occur.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Explanation of the symbols on the product or packaging
Icon
|
Description
---|---
|
Product in which protection against electric shock does not rely on basic insulation only, but in which additional safety precautions such as double insulation or reinforced insulation are provided, there being no provision for protective earthing or reliance upon installation conditions. NOTE A Class II products may be provided with means for maintaining the continuity of protective circuits, provided that such means are within the product and are insulated from accessible surfaces according to the requirements of Class II.
|
Indication to explain the product is suitable for indoor use only.
|
Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.
Installation
Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Optional: Installing the hard disk (not included)(image D)
D
1. Carefully place the base station A2 upside down on a soft surface.
2. Unscrew the screws to remove the hard disk cover A3 from A2.
3. Mount A3 to your hard disk using the provided hard disk bolts Ae, as shown in image D.
4. Connect the power cable and data cable of the hard disk to A2.
5. Secure A3 back into place with the screws.
Installing the product (image E)
E
1. Connect the cables to the product as shown in image E.
It is also possible to use a VGA cable instead of an HDMI cable for use with monitors with VGA ports.
You can use one of the USB-ports to connect external storage (for backup only)(not included).
Installing the security cameras (image F)
F
1. Install the cameras using the included drilling template A9, plugs Aq, and screws Aw.
2. Plug the power cable Aj into the DC connector Ad.
3. Connect Aj to a power outlet.
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your smartphone.
3. Create an account with your mobile phone number or your e-mail address and tap Continue.
You will receive a verification code on your e-mail address.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Installation wizard
Note: You can view the software on a monitor or TV and can control the software with the mouse, when plugged into one of the USB ports of A2.
Note: The product makes a beep sound when the software is ready for installation.
1. Follow the instructions of the installation wizard.
- The installation wizard is complete when the overview screen of the software and cameras is shown.
2. Click the reload/login icon B1.
3. Log in using your credentials.
- By default both the username and password of the software are: admin
4. Click OK.
Adding the product to the Nedis SmartLife app
1. Switch on the product.
2. Open the Nedis Smartlife app on your smartphone.
3. Tap + in the Nedis SmartLife app.
4. Tap [–] in the top right corner in the Nedis SmartLife app.
5. Scan the QR-code shown on the TV/monitor.
6. Follow the instructions in the Nedis SmartLife app.
Make sure you connect the product to a 2.4 GHz Wi-Fi network.
7. Rename the product after it has been found and added.
8. After confirming you can control the product with your smartphone.
Connecting the camera
1. Press the pairing button Af for 5 seconds.
It takes approx. 1 minute before the camera is connected to the product.
The signal strength of the connected camera B4 on the monitor lights up green.
The camera view is visible on the monitor.
Use
Function descriptions of the software (image B)
Function
|
Description
---|---
Pair IPC
|
Check the status of the IPC channel and whether it is connected.
System
|
Open a new window with the system settings.
Playback
|
Playback video recordings stored on the hard disk.
Record mode
|
Schedule video recordings throughout the week.
Backup
|
Backup the videos of the hard disk to an external hard disk/USB.
PTZ Control
|
Control the camera from a distance (not available for this product).
IPC Config
|
Adjust the settings of the cameras.
Info
|
Shows information about the system
Shutdown
|
Switch off the system.
View 4
|
Switch between an overview of 1 or 4 camera views.
Function descriptions of the Nedis SmartLife app (image C)
Function
|
Description
---|---
Playback C2
|
Tap C2 to play back the video footage stored on the hard disk.
Message C3
|
Tap C3 to view human detection alarms.
Albums C4
|
Tap C4 to view recorded video footage and screenshots saved to an album on your smartphone.
Settings C5
|
Tap C5 to open a new window with the system settings
Screenshot C7
|
Tap C7 to make a screenshot of the current camera view. The screenshot will be saved to an album on your smartphone.
Security camera speaker C8
|
Tap and hold C8 to speak through the speaker of the camera.
Record video C9
|
Tap C9 to record the current camera view. The video footage will be saved to an album on your smartphone.
Maintenance
Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, NEDIS, as manufacturer, declare that product SLNVR201CWT from the brand Nedis, produced in China was tested according to all relevant CE standards / regulations and passed all tests.
The complete Declaration of Conformity ( + safety datasheet if applicable ) can be found and downloaded via http://webshop.nedis.com
For other compliant-related information, please contact customer service desk for support:
via website: http://www.nedis.com
via e-mail: service@nedis.com
via telephone: +31 (0)73-5991055 (during office hours)
NEDIS B.V., De Tweeling 28,
5215 MC ’s-Hertogenbosch, THE NETHERLANDS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>