ibiza LIGHT TINYLED-LASRGB Battery Powered Pocket Size 3w RGB LED and Laser Effect Instructions
- May 15, 2024
- ibiza LIGHT
Table of Contents
BATTERY-POWERED
POCKET-SIZE 3W RGB LED
& LASER EFFECT
Ref. TINYLED-LASRGB MANUAL
TINYLED-LASRGB Battery Powered Pocket Size 3w RGB LED and Laser Effect
Manual – TINYLED-LASRGB
BATTERY-POWERED POCKET-SIZE 3W RGB LED & LASER EFFECT INSTRUCTION MANUAL
FEATURES
The super-compact housing contains an RGB LED and a laser powered by a battery that recharges via the in- cluded DC-USB lead. Easy to carry, this pocket- sized effect will set the mood wherever you are.
- 1x 3W 3-in-1 RGB LED
- 160mW RGB Laser
- Automatic, music or remote-controlled operation
- Rechargeable battery via the supplied DC-USB lead
- Remote control
EXPLANATION OF SYMBOLS
**** | The unit complies with UK standards |
---|---|
For indoor use only | |
Don’t stare into the light beam | |
Don’t stare into the laser beam |
IMPORTANT INSTRUCTIONS REGARDING LASERS
- Laser device compliant with EN60825-1: 2014
- This is a class 3R laser, direct exposure may be harmful to the eyes
- The use of this outgoing laser device is reserved for a specific use of show or display.
- The device must be installed so that the rays remain above the public
- The device must be firmly fixed to prevent it from falling or changing the orientation of the angle of the rays.
- Any risk of accidental reflections of the beams (mirrors, magnifying glass, objects, obstacles, walls, etc.) must be avoided.
- The device may only be used for the purpose for which it is intended, any other use is prohibited.
- Never look at the beam directly, exposure can be dangerous for the eyes
- The device must never be opened. Only the manufacturer is authorized to open the device, for class 3R laser service
- Only external cleaning of the device is authorised, for this the device must first be unplugged.
IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS
-
Please read these instructions carefully, they include important information about the installation, usage and maintenance of this product.
-
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also receives this instruction booklet.
-
This product is intended for indoor use only!
-
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials close to the unit while operating.
-
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces.
Be sure that no ventilation slots are blocked. -
Secure fixture to fastening device using a safety chain.
-
Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this.
-
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance
center. Always use the same type of spare parts. -
The light sources of the light effects are not replaceable. If a light source is faulty, the light effect must be discarded.
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always ensure
that the unit is firmly fixed to avoid vibration and slipping while operating.
Always ensure that the structure to which you are attaching the unit is secure
and able to support a weight of 10 times of the unit’s weight.
IR REMOTE CONTROLLER
Please operate the remote control within a distance of 6m and 30° between the
remote and the appliance. Aim the remote at the sensor. Remove all obstacles
between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong
sunshine.
If the remote control doesn’t work properly, please check the batteries.
INSTALLING THE BATTERIES IN THE REMOTE CONTROL
- Place the remote face down on a flat surface.
- Push the compartment cover into the direction of the arrow.
- Slide the battery compartment open.
- Remove the old battery and install the new one (23A 12V) with the correct polarity.
- Gently slide the battery compartment closed. It locks automatically.
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with
household waste but deposed correctly in accordance with your local
regulations..
Batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
When the internal batteries are not to be used, remove them to avoid damage
caused by battery leakage or corrosion.
ATTENTION: Danger of explosion if battery is incorrectly placed. Only
replace by the same or equivalent type.
WARNING :Do not swallow the battery. Danger of chemical burns. Keep new
and old batteries out of the reach of children.
If the battery compartment doesn’t close properly, stop using the product and
keep it out of the reach of children.
If you are in doubt whether the batteries have been swallowed or introduced
into any other part of the body, contact immediately a doctor.
REMOTE CONTROL
ON/OFF: Light ON/OFF
LED: LED Auto running
LASER: Laser Auto running
A1: Red LED
A2: Green LED
A3: Blue LED
FLASH: Led+laser+LED strobe running
MUSIC1: Sound mode 1 LED effect
MUSIC2: Sound mode 2 Laser effect
MUSIC3: Sound mode 3 Strobe+LED+Laser effect
PAUSE: Effect pause
IMPORTANT NOTE : APPLIANCES CONTAINING LITHIUM-ION BATTERIES
- PRIOR to using the unit for the first time, please charge fully the battery
- Charge the battery regularly after each use. Don’t wait until it is discharged!
- DON’T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or even be totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore and it will become impossible to recharge the battery!
- If you don’t use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity and check/charge it once per month.
The life time of the battery depends on the observance of these recommendations.
BATTERIES ARE NOT COVERED BY THE WARRANTY
We cannot be held responsible for damaged batteries further to the non-
observance of these basic rules.
SPECIFICATIONS
Input voltage……………………………………………………………… 5Vdc 1A
Consumption……………………………………………………………….5W
LED …………………………………………………………………………..1x 3W 3-in-1 RGB LED
Laser wavelength and AEL laser power …………………………R : 650nm – 1.579mW
…………………………………………………………………….G : 532mn – 1.486mW ; B: 450nm-0.679mW
CW laser radiation max total power …………………………………3.744mW
Divergency ……………………………………………………… <1.3mrad
Battery ……………………………………………………………….Lithium 3.7Vdc -3600mAh, 13.32Wh
Dimensions ……………………………………………………….. 73 x 75 x 84mm
Weight……………………………………………………………………….. 0.3kg
Laser Class 3R laser product, :
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed.
https://www.lotronic.net/TINYLED-LASRGB
Imported from China by LOTRONIC S.A.
Avenue Zénobe Gramme 9
B-1480 Saintes
www.ibiza-light.com
©Copyright LOTRONIC 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>