NANLITE Compac 68 LED Studio Light User Manual
- June 5, 2024
- NANLITE
Table of Contents
Compac 68 LED Studio Light
User Manual
Product Show
Technical Data
LED Quantity: 340pcs
Voltage: AC 100V-240V
LED Power: 68W
Color Temperature: 5600K
CRI(Ra): 95
Product Details
Detailed Description
- Power switch: Turn on/off the fixture.
- Bracket fixing knob: For connecting the fixture with the light stand.
- Dimmer knob: For adjusting the brightness.
- Fuse base: For placing the fuse.
- AC power socket: AC power input port.
- Angle fixing knob: For adjusting the illumination direction of the fixture.
Usage
- Please install the fixture on the light stand, then adjust the fixture to the desired position.
- Please switch off the power then connect to AC 100-240V power.
- Press the power switch to turn on the fixture.
- Rotate the “Dimmer knob” to adjust the brightness.
- Please turn off the fixture and unplug the power cord when stop using the light.
Security Warning Info
- Please open the package to check if it is damaged from transportation after receiving the light. In case of damage caused by transportation, please do not use this light and contact the dealer as soon as possible.
- Do not use a power cord if damaged insulation. Do not unplug hard or drag the power cord directly.
- Make sure that the power supply voltage used matches the voltage specified by the light before installation.
- When not using or cleaning the light, please turn it off.
- Keep the light safely stored and away from children.
Notice
- Before using, please read the instruction sheet carefully and then install the product according to the instruction sheet.
- The product should be operated within the normal voltage.
- Pull insert plug, please do not use too much force to pull the connection. And do not touch the connection with a wet hand.
- Please keep this product in a dry and ventilated place, to avoid the circuit getting wet, and causing a short circuit.
- When stop using it, please turn off the power to preserve the life of the LEDs.
What’s in the box? Please kindly check
Troubleshooting List
| Potential Malfunction | Diagnosis |
|---|---|
| The light can not light up. | 1. Please check if the fixture is in the “off” |
position.
2. Please check whether the connection between the power cord plug and
fixture is loose.
The lamp is flickering.| 1. Please check whether the voltage value is within
specified parameters.
2. Check if there is any high-temperature object near the light
that could cause the operating environment to temperature too high.
If the failure is not solved after the above troubleshooting procedures, please contact the dealer or manufacturer for repair.
The instruction was written according to the strict production test of our company, if there are any changes related to the design of the product later, we will not keep you updated on that.
+86-754-85751187
service@nanlite.com
+86-754-85300887
Zhanglin,324, Dongli Chenghai Shantou Guangdong China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>