Nanlite 200 Compac LED Studio Light User Manual
- June 5, 2024
- NANLITE
Table of Contents
Nanlite 200 Compac LED Studio Light
**User Manual**
Compac 200 LED Studio Light
Product Show
Technical Data
LED Quantity: 1120pcs
Voltage: AC 100V-240V
LED Power: 224W
Color Temperature: 5600K
CRI(Ra): 95
Product Details
Detailed Description
- Display: For showing related data.
- Power switch: Turn on/off the fixture.
- Bracket fixing knob: For connecting the yoke with the light stand.
- Angle fixing knob: For adjusting the illumination direction of fixture.
- Dimmer knob: For adjusting the brightness.
- Lighting code button: Press the “+” button to increase the lighting code and press the “-” button to reduce the lighting code. The display shows the current value and its range is A001…A512. The 2 buttons are allowed to short or long press.
- AC power socket:AC power input port.
- Yoke: For connenting the fixture with light stand.
- Fuse base: For placing the fuse.
Usage
-
Please install the fixture on the light stand, then adjust the fixture to the desired position.
-
Please switch off the power then connect to AC 100-240V power.
-
Press the power switch to turn on the fixture.
-
Rotate the “Dimmer knob” to adjust the brightness, its range is L000…L100.
-
Compac 200 is desighed to work with a 2.4G remote controller or NANLITE WiFi-App via WiFi transfer device to control light remotely.
NOTE: 2.4G remote controller or WiFi transfer device should be bought additionally.(See separate instructions for remote controller or WiFi transfer device. ) -
Turn off the fixture and unplug the power cord when stop using the light.
Security Warning Info
- Please open the package to check if it is damaged from transportation after receiving the light. In case of damage caused by transportation, please do not use this light and contact the dealer as soon as possible.
- Do not use a power cord if damaged insulation. Do not unplug hard or drag the power cord directly.
- Make sure that the power supply voltage used matches the voltage specified by the light before installation.
- When not using or cleaning the light, please turn it off.
- Keep the light safely stored and away from children.
Notice
- Before using, please read the instruction sheet carefully and then install the product according to the instruction sheet.
- The product should be operated within the normal voltage.
- Pull insert plug, please do not use too much force to pull connection. And do not touch the connection by wet hand.
- Please keep this product in dry and ventilated place, to avoid the circuit get wet, and cause short circuit.
- When stop using, please turn off the power to preserve the life of the LEDs.
What’s in the box ? Please kindly check
Troubleshooting List
If the failure is not solved after the above troubleshooting procedures, please contact the dealer or manufacturer for repair.
The instruction was written according to the strict prodution test of our company, if there are any changes related to the design of the product later, we will not keep you updated for that.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>