NANLITE PB10C PavoBulb 10C Bi-Color RGBWW LED Bulb User Manual

PavoBulb 10C
USER MANUAL
Guangdong NanGuang Photo &Video Systems Co., Ltd 

Product Diagram

Technical Data

Rated Power: 10W
Input Voltage/Current: DC 5V/2.4A
AC 100-240V 50Hz/60Hz
Color Temperature: 2700K-7500K
CRI: Average 95
TLCI: Average 97

Detailed Description

1. Diffuser: To soften the light.
2. CCT/HUE Button: Short press the CCT/HUE button to adjust CCT or HUE by intervals.
3. MODE Button: Short press the MODE button to switch modes between CCT and HSI.
4. DIM Button: Short press the DIM button to adjust the intensity by intervals.
5. E27 Head: Power the bulb with an E27 Edison base.
6. USB Type-C Port: For power input or firmware updates. And for DMX signal input and output when connected with

USB-C to DMX cable splitter. (Note: The USB-C to DMX cable splitter is sold separately.)

Usage

1. Power connection
   ①Connecting the fixture via a USB cable, then to a USB adapter with an output of 5V/2.4A or more. (See #1)
   (Note: USB adapter is not included)
   ②Screwing the bulb into an E27 Edison base to power the bulb directly.
   Note: Please ensure the power is disconnected before screwing in. (See #2) ③Connection with the BT-BA-SNP-E27 battery adapter. (See #3) ![NANLITE PB10C PavoBulb 10C Bi-Color RGBWW LED Bulb

• Connection](https://manuals.plus/wp-content/uploads/2022/07/NANLITE-PB10C- PavoBulb-10C-Bi-Color-RGBWW-LED-Bulb-Connection.png)

  2. The connection between the Light Fixture and WC-USBC-C1 Wire Controller. (See #4)
     The fixture can be controlled by the wired controller in CCT mode, HSI mode, EFFECT mode, CHANNEL setting, LANGUAGE, DMX mode, WIRELESS PROTOCOL, BLUETOOTH RESET, FIRMWARE UPDATE, and VERSION checking (please refer to the wired controller user manual for detailed instructions).
     (Note: Wire controller is sold separately.)

Remote Control and Control Method by Wire Controller

• PavoBulb 10C supports DMX, 2.4G, and wire controller control, and includes a built-in Bluetooth as well.
  ▲Address code needs to be pre-set for DMX and 2.4G control.
  1. Address setting
  The address code of the fixture can be set by connecting DMX/RDM console, wired controller, or by APP via the transmitter box. (For specific operations, please refer to the relevant manuals.)
  2. DMX Remote Control
  ①Connect the fixture to the DMX/RDM console with a DMX adapter cable.

• The connection between the fixture and DMX adapter cable is as follows:

• The connection between light fixtures, or light fixtures and DMX/RDM consoles should use a DMX adapter cable.
  (DMX adapter cable is not included.)
  XLR plug/socket and the wire should be connected as shown above.

• Pin1, Pin2, and Pin3 for connecting DMX signal. Pin4 and Pin5 have no connection.
  ▲NOTE: When connecting DMX, make sure the internal pin is not in contact with the inner case. The fixture can match the DMX512 (1990) control signal.
  ②DMX Terminator
  ln DMX control mode, the DMX output of the last fixture should be connected with a DMX terminator (Not included). This prevents interference caused by DMX signals in the transmitting process.
  The terminator is connected with a 120Ω(OHM) resistor across Pin 2 and Pin 3. (As shown below)

| DMX Terminator Connection Connect a 120Ω(OHM) resistor across Pin 2 and Pin 3 in an XLR plug and insert it into the DMX OUT socket on the last unit.|
---|---|---

③Set the channel of the fixture.
④Refer to the DMX reference guide and control the light via DMX/RDM console. (For detailed operation please
refer to the DMX/RDM console operation manual.)
Note: DMX reference guide “PavoBulb_10C_DMX_REFERENCE_GUIDE_EN” is downloadable from www.nanlite.com.
http://en.nanlite.com/uploads/files/DMX_REFERENCE_GUIDE/PavoBulb_10C_DMX_REFERENCE_GUIDE_EN.pdf
Please scan the QR code to check or download the latest DMX reference guide.
3. 2.4G Remote Control

• Set the address of the 2.4G remote controller to be consistent with the light fixture, enabling the fixture to be
  remotely controlled by a 2.4G remote controller or by APP via the transmitter box.
  Note:
  ①2.4G remote controller and transmitter box are sold separately.
  ②The fixture supports the 2.4G wireless protocol V1.0 and V2.0. Please set the fixture to V2.0 while using
  WS-RC-C1 or WS-RC-C2 remote controller. Please set the fixture to V1.0 while using other remote controllers.

• The following is how to modify the wireless control protocol using the wired controller.
  (Note: The wired controller is sold separately.) Press the SWITCH button to WIRELESS PROTOCOL.
  Press + – to select V1.0 or V2.0.

Operating Instructions

1.  The Bulb will light up automatically once powered.

2.  DIM Button: Short press DIM button to adjust brightness by intervals from 0%, 20%, 40%, 60%, 80%, 100%.
   When it reaches 100%, press the DIM button, and the brightness will reset to 0%.

3. MODE Button: Short press the MODE button to switch modes between CCT and HSI.

4. CCT/HUE Button: Short press the CCT/HUE button to adjust CCT or HUE by intervals.
   When reaching to the maximum value, it will return to the minimum value when pressing the button again. (When the HUE was adjusted to 360, press the button again it will return to 30.)
   CCT: 2700K, 3200K, 4300K, 5600K, 6500K, 7500K.
   HUE: 0, 30, 60, 90, 120, 150, 180, 210, 240, 270, 300, 330, 360.

5. Bluetooth Reset: Long press the three buttons at the same time until the bulb flashes in blue for 3 seconds, which means the reset is completed.

6.  Firmware Update:
   ①When the PavoBulb 10C is powered by the E27 Magnetic Mount, long press the MODE button after inserting the USB flash drive with new firmware, and the bulb will flash in blue. Then long press the DIM button and CCT/HUE button at the same time to start the firmware upgrade. After the upgrade is completed, the bulb will flash in green before entering the normal functional state. If the upgrade fails, the bulb will flash in red for 3 seconds and then return to the normal functional state.
   ②The PavoBulb 10C can be upgraded by the wired controller. For the detailed operations, please refer to the user manual of the wired controller.

7. When not using the fixture, it will turn off automatically once disconnected from a power supply.

Notice

1. When the fixture is turned on, do not look directly at the emitter.
2. Please do not leave flammable or explosive articles within 0.5m of the fixture.
3. Avoid placing lamps near flammable and volatile substances, such as alcohol or gasoline.
4. When cleaning the fixture, please use a soft cloth with neutral detergent to wipe off the dirt. Please do not use abrasives or strong detergent.
5. During use, do not cover, restrict or obstruct ventilation holes, so as not to affect the heat dissipation and cause damage to the fixture. Please take care when using the lamp for long periods, as the surface temperature can be high.
6. Please do not disassemble the fixture or attempt to carry out repairs. Any required maintenance should be carried out by suitably qualified professionals, operating in strict compliance with the instructions described in this manual.

Safety Precautions

1. Please open the package to check for possible damage. If damaged, do not use it. Please contact your dealer or
   the manufacturer as soon as possible.

2. Please use the standard E27 lamp holder with safety certification.

3. Before installation, please make sure the power supply voltage is correct and compatiblewith that specified on the fixture.

4. Please turn off the power when the fixture is not in use or being cleaned.

5. Please operate the fixture safely. Keep fixtures away from children.

The light won’t start up.

holder is being used.
2. Please ensure the power voltage value as indicated.

What’s in the box? Please kindly check.

PavoBulb 10C 4KIT

PavoBulb 10C 12KIT

This manual and all stats within it were produced under controlled conditions, and are accurate at the time of print.
Any future changes to design/technical data can be found at www.nanlite.com.

Version: V2 2022-01-25

+86-754-85751187
[email protected]
+86-754-85300887
Zhanglin,324, Dongli Chenghai Shantou Guangdong China
www.nanlite.com 

References

• NANLITE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>