FEIT Electric A21RGBWAG Smart WiFi Bulb Installation Guide
- June 5, 2024
- Feit Electric
Table of Contents
FEIT Electric A21RGBWAG Smart WiFi Bulb
Installation Guide
-
DOWNLOAD AND INSTALL THE FEIT ELECTRIC APP
- Search for the Feit Electric app in the App Store or Google Play Store.
- Download and install the Feit Electric app on your smart device.
- Set up an account or log in to your existing account.
-
INSTALL YOUR LIGHT BULB
- Screw into an E26 medium base socket.
-
ADDING YOUR SMART WI-Fi BULB USING THE FEIT ELECTRIC APP
- Tap+ in the upper right corner.
- NOTE: If this is the first device you are setting up you can also select Add Device (A).
- Tap Lighting and select Lighting Device (B) Power off and on the bulb three times and confirm the light bulb is blinking. Select Confirm then tap Next (C).
- You will be prompted to confirm your Wi-Fi network and enter your password. Then tap Next (D).
-
STATUS MENU The status menu will appear. Wait until it is completed.
NOTE: If unsuccessful, the “Failed to Add” screen will appear. Close the aPP and repeat the previous steps. successful, continue to step 5. -
NAMING DEVICES To name the bulb tap the Pen icon, enter the new name and tap Done.
The light bulb is now ready to be Controlled with the Feit Electric app.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmrul interterence to radio communications. However, there is no
guarantee that interterence will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible for complhance could void the user s authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>