Imou NVR1104HS-W Network Video Recorder User Manual

Imou NVR1104HS-W Network Video Recorder

General

This operations Quick of Start the Guide NVR devices (hereinafter (hereinafter referred to referred be “the to be Guide”) “the Device”). introduces the functions

Safety Instruction

The following categorized signal words with defined meaning might appear in the Guide.

rpersouplet.rty damage, data loss, lower performance, or unpredictable

� TIPS| Provides methods to help you solve a problem or save you time.
w NOTIE| tPorothveidteesxta. dditional information as the emphasis and supplement

Privacy Protection Notice
As the device user or data controller, you might collect personal data of others such as face, fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be in compliance with the local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures include but not limited to: providing clear and visible identification to inform data subject the existence of surveillance area and providing related contact.
About the Guide

• The Guide is for reference only. If there is inconsistency between the Guide and the actual product, the actual product shall govern.
• We are not liable for any loss caused by the operations that do not comply with the Guide.
• The Guide would be updated according to the latest laws and regulations of related regions. For detailed information, see the paper manual, CD-ROM, QR code or our official website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail.
• All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the Guide. Please contact the customer service for the latest program and supplementary documentation.
• There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, please refer to our final explanation.
• Upgrade the reader software or try other mainstream reader software if the Guide (in PDF format) cannot be opened.
• All trademarks, registered trademarks and the company names in the Guide are the properties of their respective owners.
• Please visit our website, contact the supplier or customer service if there is any problem occurred when using the device.
• If there is any uncertainty or controversy, please refer to our final explanation.

Important Safeguards and Warnings

The following description is the correct application method of the device. Read the guide carefully before use to prevent danger and property loss. Strictly conform to the guide during application and keep it properly after reading.

Operating Requirement

•  Don’t place and install the device in an area exposed to direct sunlight or near heat generating device.
• Don’t install the device in a humid, dusty or fuliginous area.
•  Keep its horizontal installation, or install it at stable places, and prevent it from falling.
• Don’t drip or splash liquids onto the device; don’t put on the device anything filled with liquids, in order to prevent liquids from flowing into the device.
•  Install the device at well-ventilated places; don’t block its ventilation opening.
•  Use the device only within rated input and output range,
• Don’t dismantle the device arbitrarily.
• Transport, use and store the device within allowed humidity and temperature range.

Power Requirement

• Make sure to use batteries according to requirements; otherwise, it may result in fire, explosion or burning risks of batteries!
•  To replace batteries, only the same type of batteries can be used.
• The product shall use electric wires (power wires) recommended by this area, which shall be used within its rated specification.
• Make sure to use standard power adapter matched with this device. Otherwise, the user shall undertake resulting personnel injuries or device damages.
• Use power supply that meets SELV (safety extra low voltage) requirements, and supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. For specific power supply requirements, please refer to device labels,
• Products with category I structure shall be connected to grid power output socket, which is equipped with protective grounding.
• Appliance coupler is a disconnecting device. During normal use, please keep an angle that facilitates operation.

1 Preparation Work

CAUTION
All the installation and operations here should conform to the local electric safety rules. The Device does not support wall mounting with the front panel facing down. When you receive the Device, please check against the following checking list. If any of the items are missing or damaged, contact the local retailer or after-sales engineer immediately.

1

|

Package

| Appearance| No obvious damage.
Packing materials| No broken or distorted positions

that could be caused by hit.

Accessories| No missing.

2

|

Labels

|

Labels on the device

| •  Device model conforms to the

purchase order.

•  Not torn up.

WNOTE

Do not tear up or throw away the

labels; otherwise the warranty

services are not ensured. You need

to provide the serial number of the

product when you call the after- sales service.

3

|

Device

| Appearance| No obvious damage.
Data cables, power cables, fan cables, mainboard| No connection loose.

WNOTE

If there is any loose, please contact

the company after-sales service in time.

Installing HDD

The following figures are for reference only. The actual product shall govern.

CAUTION
Shut off the power before you replace the HDD.
SMART 1U
For the first time installation, make sure whether the HDD has been installed or not. It is recommended to use HOD of enterprise level or surveillance level. It is not recommended to use PC HOD.

• Step 1: Turn over the device and remove the four fixing screws on the baseboard of the device.
• Step 2: Remove the case cover along the direction shown in the following arrow.
• Step 3: Match the four holes on the baseboard to place the HOD.
• Step 4: Turn the device upside down, match the screws with the holes on the HOD and then fasten them. The HDD is fixed to the baseboard.
• Step 5: Connect the HOD data cable and power cable to the device.
• Step 6: Put back the cover and fasten the four screws on the baseboard to complete the installation.

MINI 1U, COMPACT 1U, 1U
For the first time installation, make sure whether the HDD has been installed or not. It is recommended to use HOD of enterprise level or surveillance level. It is not recommended to use PC HOD.

• Step 1: Remove the fixing screws of the case cover (including the two screws on the rear panel and two screws on the left and right panels).
• Step 2: Remove the case cover along the direction shown in the following arrow.
• Step 3: Match the four holes on the baseboard to place the HOD.
• Step 4 : Turn the device upside down, match the screws with the holes on the HOD and then fasten them. The HDD is fixed to the baseboard
• Step 5: Connect the HOD data cable and power cable to the device.
• Step 6: Put back the cover and fasten the screws on the rear panel and side panels to complete the installation.

Connection

NOTE: Following figures are for reference only. The actual product shall govern.

NOTE

• Please check the icons on the rear panel carefully and refer to the actual product for detailed information.
• If the icon is ‘,fJi’, input DC 12V power. If the icon is•, input DC 48V power.

References

• Dahua Technology - World Leading Video-Centric AIoT Solution & Service Provider
• Support - Dahua International
• Notices - Dahua Technology USA Inc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>