Skullcandy Indy ANC True Wireless In-Ear Earbuds User Manual

: June 5, 2024
: Skullcandy

Table of Contents

FEATURES
CONTENTS
FEEL YOUR AUDIO. TUNED JUST FOR YOU.
DO THIS FIRST TO PAIR:
EASY CONTROLS:
PAIRING HELP:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Indy ANC True Wireless In-Ear Earbuds
User Manual

Noise Cancelling True Wireless Suppression du Bruit Sans Fil Veritable
**** Active Noise Cancellation Blocks Out Background Noise
Personal Sound by AudiodoTM
Up to 32 Hours Total Battery
Wireless Charging Case

Compatible with Skullcandy App

FEATURES

4-Mic Digital Active Noise Cancellation
Personal Sound via Skullcandy App
12mm Drivers
Built-In Tile
Customizable EQ Modes via Skullcandy App
Ambient Listening Mode
Lag-Free Connection
Call, Track, and Volume Control via Touch
2-Mic Noise Reduction for Calls
Activate Assistant

FEEL YOUR AUDIO. TUNED JUST FOR YOU.

Everyone’s hearing is different. But most headphones are all the same — they don’t adjust to your unique hearing. That’s why Skullcandy has partnered with Audiodo- to fully personalize your audio experience.
Audio technology analyzes the hearing in your left and right ear, then automatically adjusts the audio to optimal levels for your specific hearing. By taking a quick, 3-minute test on the Skullcandy App, you can start hearing what you’ve been missing.

DO THIS FIRST TO PAIR:

Remove earbuds from the package, place them in the charging case, and make sure both earbud LEDs turn red.
Remove earbuds from the charging case.
This will automatically put them in pairing mode.
(Note: only the left bud will flash red and blue.)
Open your list of available Bluetooth devices and select ‘Indy ANC.” Earbud LEDs will turn blue when connected. Be sure to select “Pair” or ”08″ when you see the Bluetooth pairing request.

EASY CONTROLS:

Auto On – Remove buds from the case
Power On – Touch and hold 4 seconds | Auto On – Remove buds from the case
Power On – Touch and hold 4 seconds
Auto-Off – Put buds in case
Power Off – Touch and hold 6 seconds | Auto-Off – Put buds in case
Power Off – Touch and hold 6 seconds
TrackBack – Touch and hold 2 seconds | TrackBack – Touch and hold 2 seconds
Volume Down – Tap once | Volume Down – Tap once
Play/Pause – Tap twice | Play/Pause – Tap twice
Answer/End Calls – Tap twice | Answer/End Calls – Tap twice
Activate Assistant – Tap 3 limas | Activate Assistant – Tap 3 limas
E0 Mode – Tap twice and hold 2 seconds | EQ Mode – Tap twice and hold 2 seconds
Ambient Mode – Tap once and hold 2 seconds | Ambient Mode – Tap once and hold 2 seconds
Clear/Reset – From off, touch and hold both buds for 10 seconds

For additional features, download the Skullcandy app.

****| Skullcandy Indy ANC True Wireless In-Ear Earbuds - Qr
Code
---|---

PAIRING HELP:

If you ever have an issue pairing your earbuds, follow these steps:

Unpair the buds from your phone or device.
Touch and hold the main button on each bud for 6 seconds to manually turn them both off.
Touch and hold the main button on each bud for 10 seconds to completely reset them (this will power them on and off again).
Place buds back in the case until both LEDs show red, and then remove them from the case. Both buds will automatically power on and the LEDs will flash blue while they sync to each other.
A tone will indicate when the buds have synced. The LED on the left bud will flash blue and red and a voice will say “pairing” when the buds start connecting to your phone or device.
Look for Indy ANC in your list of available Bluetooth devices. Make sure it only appears once and select It.
Select all “Pair or “OK’ prompts that will pop up on your screen.
Once successfully paired, a voice will say “connected” and you’ll see Indy ANC twice on your available or paired devices list.

Questions?
Skullcandy.com/support/IndyANC

Safety information inside.
Made in China.
Skullcandy and other marks are registered trademarks of Skullcandy, Inc.
All rights reserved.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by Skullcand, Inc. is under license. Contains a Li-ion battery. The battery must be recycled or disposed of properly.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

“Android” is a trademark of Google inc. “Apple” is a trademark of Apple inc.
MODEL : S2IYW S2IYWL
FCC ID: Y22-S2IYW
IC: 10486A-S2IYW

© 2020 Skullcandy, Inc.
Skullcandy.com/patent-information