TYLT Bottle 2 Water Bottle and Power Bank Instruction Manual
- June 15, 2024
- TYLT
Table of Contents
TYLT Bottle 2 Water Bottle and Power Bank
Bottle 2.0
- Cap It has a wide mouth design.
- Lanyard Easy transportation.
- Thermal Bottle Double layer vacuum insulation keeps 24 oz of liquid hot or cold for up to 12 hours. The inside is stainless steel grade 314 anti-corrosion.
- Cable Storage The cable and cable storage space are located above the battery.
- Removable Battery 5,700 mAh capacity. Wired and wireless charging give up to two full charges.
- Power Button Turn it on or off.
- LED Light Blinking white light indicates charging.
- Charging Ports Located on the back of the battery.
Caution
- Careful. The beverage you are about to enjoy may be very hot. Always use caution.
- DO NOT wash the battery. Always unscrew the battery first before washing the bottle.
- If filling with boiling liquid, allow liquid to cool with the cap OFF for at least 3 minutes.
- DO NOT microwave or freeze.
- DO NOT use harsh chemicals to clean the bottle or battery such as bleach, chlorine and / or abrasives.
Cleaning Instructions
- Wash thoroughly before first use.
- Hand wash ONLY. Remove the battery first, then soak the cap for 10 minutes in hot, soapy water.
- Wash bottle with warm water and mild detergent.
- Rinse the cap and bottle before use.
- DO NOT wash or submerge the battery in water.
- Clean the battery with a damp cloth, while the port cover is closed.
- Always store the bottle with the cap removed to allow the parts to completely dry.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>