Hikvision DS-PS1-I-WB Wireless Internal Sounder User Manual
- June 5, 2024
- Hikvision
Table of Contents
Hikvision DS-PS1-I-WB Wireless
Internal Sounder
APPEARANCE
| 1. Strobe Light | 5. Tamper Screw Hole |
|---|---|
| 2. Buzzer | 6. Tamper Button |
| 3. Cable Hole | 7. Power Switch |
| 4. Set Screw |
ENROLLMENT
INSTALLATION
Check signal strength.
User Manual
Scan the QR code for more information and operation help.
http://enpinfodata.hikvision.com/analysisQR/showQR/1862bf18
| RF | Frequency | 433.1 MHz |
|---|---|---|
| Method | Two-way communication | |
| Distance | 0.8 KM | |
| Indication | Indicator | Red/Green/Amber |
| Strobe light | Red/Blue | |
| Power | Power | Battery (default power supply method) |
| Consumption | Quiescent Current: 40uA |
Max. 3 V/4A (alerts in volume level 3 )
Low Battery Cut Off| 2.45 V
Voltage Range| Fully charged (new) to 2.45V DC (battery)
Battery life span| 3 CR123A, 3 years in work status (triggered every two weeks
and alerting 90 s for each triggering)
Interface| Power switch| Power switch
Tamper switch| Front and rear tamper-proof
Buzzer| Decibel| 90 to 110 dB
Max. sound duration| 15min (900s)
General| Operation Temperature| -10 °C to40 °C (14°F to 104°F)
Operation Humidity| 10% to 90%
Dimension(W x H x D)| 88x 88 x 32 mm (3.46″ x3.46″ x 1.26″ )
Weight| 169.5g
Installation| Wall mounting
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images, and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to
change, without notice, due to firmware updates or other reasons. Please find
the latest version of this Manual on the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product.
and other Hikvision trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned are the properties
of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE, AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM CYBER-ATTACKS,
HACKER ATTACKS, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU
ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT
LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF
MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier or to
a designated collection point. For more information see:www.recyclethis.info
BATTERY CAUTION
replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
- disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
- a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
Chemical burning danger
Do not swallow the battery.
Keep new and used batteries away from the children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Risk of explosion if the battery is replaced by an incorrect type.
Replacement of a battery with an incorrect type can defeat a safeguard.
Dispose of used batteries according to the instructions and local regulations.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
Install the batteries according to the polarity mark on the battery holder.
The opposite polarity may cause device damage.
INSTALLATION CAUTION
The additional force shall be equal to three times the weight of the equipment
but not less than 50N. The equipment and its associated mounting means shall
remain secure during the installation. After the installation, the equipment,
including any associated mounting plate, shall not be damaged.
Install the device in a place with nonflammable surfaces, such as a concrete
wall.
Hangzhou Hikvision Digital Technology CO., Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>