cecotec HidroBoost 3200 Induction Pro Professional Pressure Washer Instruction Manual

cecotec HidroBoost 3200 Induction Pro Professional Pressure Washer

PARTS AND COMPONENTS

1. Pressure washer
2. Water hose
3. Water supply
4. Water inlet
5. High-pressure hose
6. Cord winder
7. Gun
8. Power supply
9. Hose reel
10. 2-Spin Brush (Soap dispenser)
11. Metallic lance
12. 360 brush
13. 3D TurboFlip nozzle
14. Anti-impurities filter
15. Ultrajet nozzles
16. On/Off
17. No use

No. 2, 3 and 8 are not included.

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.

• This device is intended to be used at a temperature below 0 ºC.

• The pressure washer must be depressurized before each use.

• This appliance has been designed for only using cleaning water, do not use corrosive chemicals.

• It is important to know how to stop this machine and bleed pressure quickly before operating it. Be thoroughly familiar with the controls.

• Stay alert, always watch what you are doing during operation.

• Do not operate the machine when fatigued or under the influence of alcohol or drugs.

• Make sure there is no people where the machine is going to be operated.

• Do not overreach or stand on unstable support. Keep good footing and balance at all times.

• Follow the maintenance instructions specified in the manual.

• The product’s plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

• Do not use any type of adapter with this product.

• To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.

• Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses, trigger gun.

• To reduce the risk of electrocution, don’t start and run the machine in the rain or storm. Keep all connections dry and off the ground. Do not touch plug with wet hands. It is strictly prohibited to let water leak into the machine.

• Make sure the machine is placed on a stable place when using, transportation, assembly, dismantling it. Be careful when it is transported from one place to another to avoid damage.

• In any event of accident (for example, contact with soap), switch off the machine and disconnect the plug from the power outlet immediately.

• Keep the device’s nozzle clear.

• Do not point the high-pressure hose towards people or animals to avoid injuries.

• Always wear safety glasses or goggles and protective clothing when operating or performing maintenance. It is also suggested to use ear protectors

• Never place hands or fingers over the spray tip while operating the unit.

• Do not try to stop or deflect leaks with any of your body parts.

• Always activate the safety lock, even when spraying is stopped for a moment.

• Always protect eyes, skin, and respiratory system from soap.

• Never spray flammable liquids or use pressure washer in areas containing combustible dust, liquids or vapours. Never operate the machine in a closed building or in or near an explosive environment.

• Do not spray electrical apparatus and wiring.

• Never disconnect the high-pressure discharge hose from the machine while the system is pressurized. To depressurize the machine, turn the power and water supply off, then press the trigger 2~3 times.

• Do not activate the safety lock while the machine is being used.

• Turn on the spray lance within one or two minutes after the machine has been started. Otherwise, the temperature of the circulating water within the machine will soon rise to a critical point, which will cause damage to the sealing rings inside the machine.

• The anti-impurities water inlet filter must be inspected regularly, so as to avoid blockage and restriction in the water supply to the pump.

• Never operate the machine unless all components are properly connected to the machine (handle, gun/wand assembly, nozzle, etc.).

• Always turn the water supply “ON” before turning the pressure washer “ON.” Running the pump dry causes serious damage.

• Do not operate the pressure washer without the anti-impurities water inlet filter. Make sure to keep this filter clear of debris and sediment.

• This machine has been designed for use with the specific pressure washer soap. It is suggested to use specific soap for each type of surface (NOT INCLUDED).

• To ensure a safe operation, use only original spare parts provided or approved by Cecotec.

• This device is not suitable for children.

• This appliance cannot be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge.
  Extension cords:

  • The use of an extension cord is not recommended. Use only extension cords intended for outdoor use. These are identified by the mark “Acceptable for use with outdoor machines; store indoors while not in use.” Use only extension cords having an electrical rating equal to or more than the rating of the machine. Do not use damaged extension cords. Examine extension cord before using and replace it if damaged. Do not pull from the cord to disconnect it. Keep the cord away from heat and sharp edges. Always disconnect the cord from the receptacle before disconnecting the machine from the extension cord. Make sure it is connected by means of a cord reel which keeps the socket at least 60 mm above the ground.
  • Use extension cords and cord connectors that are properly earthed.

BEFORE USE

NOTE: Make sure all the product components are included in the package and they are all in good conditions. In any of the parts are missing or present visible signs of damage, contact immediately the official Technical Support Service of Cecotec.

WARNING: This unit is to be connected to a cold-water source only.

• Connect the high-pressure hose to the pressure washer and then connect the spray gun to the high-pressure hose.
• Connect the metallic lance and the nozzle by pressing the connector.
• Make sure the anti-impurities filter is clear of any blockage.
• Connect the water hose.
• Check that the hoses have no kinks.
• Turn on water and check for leaks.
• Depress trigger to allow air to be expelled through the pump and high-pressure hose, lock trigger.
• Plug in machine and turn on switch.
• Unlock trigger and use the pressure washer.
  NOTE: It is very important to bleed the gun before using the pressure washer. Squeeze the trigger to allow any air that is trapped inside of the unit and high-pressure hose to escape. Continue to squeeze trigger until a steady stream of water comes from the nozzle. (This process may take up to 2 minutes).

OPERATION

This portable pressure washing is a highly specialized multifunctional machine with exceptionally reliable safety assurance, which may be used to wash and clean cars, bikes and other outdoor equipment or garden patios, green houses etc.
WARNING: Be aware of the recoil caused by the water jet when the machine is switched on.

NOTE: Pay special attention when cleaning delicate surfaces such as bodywork o wheel rims, lacquered surfaces, wood, paint, etc.

AUTO ON/OFF
The motor on this pressure washer does not run continuously. It only runs when the trigger of the spray gun is squeezed. After following the start-up procedures in this manual, turn the pressure washer ON and squeeze the trigger for activation.

SHUT DOWN

1. Turn off the motor (push switch to the off position).
2. Unplug the unit from the power source.
3. Turn off the water supply.
4. Press the trigger of the gun to depressurize the system.
5. Disconnect the water inlet hose from the pressure washer.
6. Wipe all surfaces of the unit with a damp clean cloth.
7. Engage the gun safety lock.

WARNING:

• Always turn off the unit’s motor before turning off the unit’s water supply. Serious damage could occur to the motor if the unit is run without water.
• Never disconnect the high-pressure discharge hose from the machine while the system is still pressurized. To depressurize the unit, turn off the motor, turn off the water supply and squeeze the trigger 2-3 times.

ULTRAJET NOZZLES
The pressure washer comes furnished with four spray nozzles. Each nozzle is colour coded and delivers a specific spray pattern and pressure for a particular cleaning job. The size of the nozzle determines the size of the fan spray and the pressure out of the nozzle.

• 0°Nozzle Red: This nozzle delivers a pinpoint stream of pressurized water and is extremely powerful. It covers only a small area of cleaning. This nozzle should only be directed at surfaces that can withstand high pressure such as metal or concrete. Do not use this nozzle to clean wood. (fig 1)
• 15° Nozzle Orange: This nozzle delivers a powerful 15-degree spray pattern for intense cleaning of small areas. This nozzle should only be used on areas and materials that can withstand high pressure. (fig 2)
• 25° Nozzle Green: This nozzle delivers a 25-degree spray pattern for intense cleaning of larger areas. This nozzle should only be used on areas that can withstand medium pressure. (fig 3)
• 40° Nozzle White: This nozzle delivers a 40-degree spray pattern and a less powerful stream of water. This nozzle can cover a wide area and should be used for more general cleaning jobs. (fig 4)

LOCK SYSTEM
It is very important to grip the gun in the right position when using the high-pressure washer, with one hand on the handle and the other on the lance. When you stop the machine, it is necessary to use the safety lock placed on the gun in order to avoid accidents.

ACCESSORIES

• SOAP BOTTLE
  Insert the metal end of the spray lance into the opening of the spray gun (making sure to match the locking tabs on either side of the spray lance to the notches of the spray gun). Push in and turn clockwise to lock the spray lance and spray gun together (make sure both are securely fitted). Insert the end of the soap bottle with the plastic locking tabs into the opening of the spray lance. Push in, turn, and lock so the soap bottle and spray lance are firmly secure.

This accessory includes a soap regulator, with which you can adjust, increase or decrease the quantity of soap used.

The combination of chemical action and high-pressure rinsing is very effective. On vertical surfaces, apply the soap starting at the bottom and work upward. This will prevent the soap from sliding down and causing streaks. High-pressure rinsing should also progress from the bottom to the top. On particularly tough stains, it may be necessary to use a brush in combination with soap and high-pressure rinsing.

• ANTI-IMPURITIES FILTER
  This model includes a transparent male connector with an anti-scale filter to which the hose is connected, preventing scale from building up.

• 360BRUSH
  This model includes a special brush for cleaning car wheels, which is made of hard bristles capable of removing the most difficult dirt. When this accessory is installed and used, water will automatically come out with low pressure.

• EASYCLEAN BRUSH
  This model also includes a cleaning brush that, combined with water and detergent, help removing stains and allow a more efficient cleaning. When this accessory is installed and used, water will automatically come out with low pressure.

• 2-SPIN BRUSH
  This accessory, included with this model, is installed onto the product’s lance and is made of hard bristles. It spins and emits high-pressure water, allowing thorough and comfortable cleaning. It is designed to clean patios, gardens and floors in general.

• 3D TURBOFLIP NOZZLE
  Use the 3D TurboFlip nozzle to clean with turbo mode. Water is distributed in a spiral-shaped stream. The 3D TurboFlip nozzle combines the power of a focused high-impact stream and the efficiency of a 25-degree stream. This turns the narrow high-impact stream into a cone-shaped one that cleans thoroughly larger areas.

CLEANING AND MAINTENANCE

• Use specific soap or cleaning agents for pressures washers.
• The machine shall be disconnected from its power source by removing the plug from the socket-outlet during cleaning or maintenance.
• Do not store the pressure washer outdoors or where it could freeze. The pump could be seriously damaged.
• The anti-impurities water inlet filter must be inspected regularly, so as to avoid blockage and restriction in the water supply to the pump

NOZZLE CLEANING
A clogged or partially clogged nozzle can cause a significant reduction of water coming out of the nozzle and cause the unit to pulsate while spraying. To clean out the nozzle:

• Turn off and unplug the unit.
• Turn off water supply. Relieve any pressure trapped in the hose by squeezing the trigger 2- 3 times.
• Separate the lance from the gun.
• Using the provided cleaning kit, or an unfolded paper clip, insert the wire into the nozzle hole and move back and forth until debris is dislodged.
• Remove debris by back-flushing water through the nozzle. To do this, point the end of a garden hose (with water running) to the nozzle’s end for 30-60 seconds.

TROUBLESHOOTING

long

•           The pump injector is clogged

•           The soap bottle is clogged

| •           Remove the high-pressure extension hose or use a shorter one (less than 7 m)

•           Contact the Technical Support Service of Cecotec

•           Clean the accessory with warm water

•           Replace the accessory

Smoke comes out from the device| •           Overheating, overload or damaged motor| •           Turn the device immediately of and contact the Technical Support Service of Cecotec
Not enough pressure| •           Water inlet filter is clogged

•           Air from the hose connections is entering the pump

•           The nozzle or relief valves are worn or not the correct size

| •           Clean the water inlet filter

•           Check that connections and locking ring are properly tightened

•           Contact the Technical Support Service of Cecotec

•           Plug is not well connected or electric socket is defective

•           Extension cord is too long or wire size too small

•           Main voltage supply is too low

•           Thermal safety switch has tripped

| •           Squeeze trigger on gun

•           Check plug, socket and fuse

•           Remove extension cord

•           Check that main supply matches the voltage stated on the product’s rating label

•           Switch the device off and allow it to cool down

Fluctuating pressure| •           Pump is sucking in air

•           Clogged nozzle

•           Valves dirty or worn

•           Water seals worn

| •           Check that hoses and connections are tight

•           Clean with the cleaning kit

•           Contact the Technical Support Service of Cecotec

•           Contact the Technical Support Service of Cecotec

The motor stops suddenly| •           Extension cord is too long or wire size too small

•           Thermal safety switch has tripped due to overheating

| •           Remove extension cord

•           Check that main supply matches the voltage stated on the product’s rating label

TECHNICAL SPECIFICATIONS

• Model: HidroBoost 3200 Induction Pro
• Reference No.: 05405
• 3200 W, 220-240 V~ 50 Hz
• Pressure: 15 MPa – 150 bar
• Max. pressure: 22.5 MPa – 225 bar
• Flow: 7.5 l/min – 450 l/h
• Max flow: 9 l/min – 540 l/h
• 5 ºC – 50 ºC IPX5
• Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly. If the product has a built- in battery or uses batteries, they should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.
The warranty will not cover the following situations:

• The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.
• The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec.
• Faults deriving from the normal wear and tear of its parts, due to use.
  The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.
  If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210

www.cecotec.es
Grupo Cecotec Innovaciones S.L. C/ de la Pinadeta s/n, 46930 Quart de Poblet, Valencia, Spain

References

• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio
• SmartGroup

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>