AYR H6 Sleeping Apparatus User Manual
- June 5, 2024
- AYR
Table of Contents
AYR H6 Sleeping Apparatus
Main Function Instruction
Specification
- input voltage: DC5V/1A
- Output power: 3W
- Sleep machine sound:
- White Noise; b) Rain; c) Fireside; d) Bird call ;
- Ocean wave; f) Wind ;
- Timer: 30/ 60/ 90minutes and play all the time
- Long press key switch short press or long press volume key to increase or decrease volume. Press the timing button briefly to switch the timing time, and the corresponding timing LED lights up.
Safety Information
Please read following cautions to avoid the unexpected emergency during using the wireless charger .
- Do not directly touch the device when it is overheated, which may bring scald hurt.
- Do not put the device in the place close to heater, microwave, electronic cooker, which may cause the device overheated and lead a fire.
- Do not frequently fall or bump the device, which may cause the explosion.
- Do not let children play or use the device when adult is not presented.
- Do not put or use the device in the environment of low temperature or humidity, the normal environment temperature should be 0-50℃
- Do not disassemble or repair the device personally
- Do not put the magnetic stripe like bank card close to the device, which may cause the magnetic failure
- Do not put the device close to medical instruments in the range of 20cm. Which may cause signal interference. Do not place foreign objects such as metal magnets on the wireless charging coil of the product to prevent high temperature from causing burns to the human body Before using this product to charge your other devices, remove the metal ornaments on the contact surface of the charged device and this product.
- please plug off the adapter when not using the device, which can save the life time and avoid the damage.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>