Haike AF001 Bluetooth Transmitter User Manual
- June 5, 2024
- Haike
Table of Contents
Haike AF001 Bluetooth Transmitter
Introduction
Thanks for choosing our wireless audio adapter. This device is an airplane Bluetooth transmitter, when the movie begins on your next long flight, plug AF-001 into your seat’s jack and listen to the film with your wireless headphones. AF-001 uses Bluetooth to connect your wireless earbuds or headphones to in-flight entertainment systems. No more lugging wired headphones or settling for those flimsy airline headphones. Also, it can transmit high-quality stereo sound from smart TV, TV Box, DVD etc. to Bluetooth devices like Bluetooth headphones, Bluetooth speakers, etc.
Specifications
- Bluetooth chipset: V4.2+EDR
- Bluetooth Frequency: 2402 MHz-2480 MHz
- Supported protocol: A2DP, AVRCP
- Bluetooth distance: 10M (Free space)
- Built-in battery: 200 mAh
- Charging input voltage: DC 5.0V
Packing content
- Bluetooth Transmitter x1 pc
- User manual x1 pc
- Charging cable x1 pc
- Airplane audio connector xl pc
Appearance
- Micro USB charging interface
- ON/OFF
Charging
When using it for the first time, please fully charge the product. when the unit is in a low power state, please charge it through the standard USB charging cable. The red light will be on when charging, the red light is off and the blue light is on when fully charged.
Power ON/OFF
- ON: Long press the ON/OFF button 3s to turn on.
- OFF: Long press the ON/OFF button 3s to turn off.
- Automatic shutdown: The device in the absence of the connection state, after 5 minutes, will automatically turn off.
Operation steps
When you use it in airplane
- Press the ON/OFF button to turn on AF-001 and turn on your Bluetooth headphones.
- Enter the search pairing state, and the red and blue lights flash alternately. It will connect with your Bluetooth headphones automatically.
- After paired successfully, the blue light flashes slowly.
- Plug AF-001 into your seat’s jack on the airplane.
- You can listen to audio from your Bluetooth headphones.
When you use it as a transmitter at home
- Press the ON/OFF button to turn on AF-001 and turn on your Bluetooth headphones.
- Enter the search pairing state, and the red and blue lights flash alternately. It will connect with your Bluetooth headphones automatically.
- After paired successfully, the blue light flashes slowly.
- Plug AF-001 into your home non-Bluetooth devices, like TV, TV Box, DVD, etc.
- You can listen to home audio from your Bluetooth headphones.
If the unit can’t work normally, please see the below info:
- Confirm power is on and it’s not in a low power state.
- Please try to reboot the adapter and check if it can work normally.
- Please make the product as close as the Bluetooth devices.
- Different Bluetooth devices use different chipsets and protocols, and the searching and connecting time may be different.
- Please contact us if you can’t solve problems according to the manual,please don’t disassemble the unit or repair it by yourself.
- Because of Bluetooth chip scheme and transport protocol are different, there will be something wrong with the connection, we will continue optimizing the device, thanks for supporting.
FFCC Statement
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>