KLARSTEIN 10029113 REINRAUM Wet and Dry Vacuum Cleaner Instruction Manual

: June 5, 2024
: Klarstein

Table of Contents

KLARSTEIN 10029113 REINRAUM Wet and Dry Vacuum Cleaner
TECHNICAL DATA
SAFETY INSTRUCTIONS
PRODUCT OVERVIEW
OPERATION
Getting Started
SOCKET FUNCTION
CLEANING AND CARE
DISPOSAL CONSIDERATIONS
MANUFACTURER & IMPORTER (UK)
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10029113 REINRAUM Wet and Dry Vacuum Cleaner

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Item number	10029113
Voltage and frequency	230 V ~ 50 Hz
Power	1600 W

SAFETY INSTRUCTIONS

Children over the age of 8 and persons with reduced physical, sensory or mental capabilities or those with a lack of experience and knowledge may only use the device if they are instructed on how to do so by a person responsible for their safety, or if they are supervised and understand the hazards associated with the use of the device.
Before use, check the voltage on the device badge. Connect the device only to sockets which correspond to the voltage of the device.
Do not vacuum near flammable or explosive materials as these may be ignited by the motor.
Do not obstruct the air intakes as heat accumulation may damage the motor.
Do not vacuum flammable or explosive materials such as burning cigarettes or gasoline. Do not suck up any sharp objects that may stick to the filter or clog it. Do not absorb powdery materials such as lime powder, gypsum or graphite powder, which could damage the engine.
Do not turn the unit over as water may enter the motor.
Switch off the appliance after each use and before cleaning and disconnect it from the mains supply.
Keep the unit away from direct sunlight or intense heat as this may deform the plastic.
To avoid damage, do not twist or step on the suction hose.
Do not allow water to run on or into the cover during cleaning as this may damage the electrical components.
Only use the product as described in the instructions. Any other use may result in damage to the product or personal injury.
Modification or alteration of the product may affect product safety.
Handle the product with care. It can be damaged by shocks, blows or falling from a low height.
Keep the product away from moisture and extreme heat.
Repairs to the device should only be carried out by an authorised specialist workshop. Do not open the unit under any circumstances. Incorrect assembly may result in malfunction or total failure.
The unit should be protected from all moisture and direct sunlight.
Do not clean the unit with cleaning agents. Use a dry or slightly damp (microfiber) cloth for cleaning.

Note: If water escapes from the air outlet, do not tilt the unit as this will damage the motor. Do not use the unit as a pump, as this may damage the motor.

PRODUCT OVERVIEW

Accessories

|
---|---
Hose assembly| Tubes
|
Filter| Bristle
|
Crevice nozzle| Bibulous floor brush

OPERATION

Assembling and Disassembling

1 |
Insert the hose connector into air inlet mouth as picture shows make sure the connector is tightly fastened. Press the connector button as picture shows and pull the connector out when want to pull hose connector from machine.
2

KLARSTEIN-10029113-REINRAUM-Wet-and-Dry-Vacuum-
Cleaner-10
Insert hose connector into the blowing mouth when you want to use its blowing function. Connect all the accessories as picture shows.

Getting Started

Insert plug into the supply socket. Press switch button, the machine begin to work. You can adjust the airflow by pushing the sliding block up and down.

|
---|---

Operation of blower

Always wear safety goggles before using the blower.
Keep bystanders clear from blowing debris.
Wear a dust mask if blowing creates dust that might be inhaled.

1| Make sure that the power cord is disconnected from the socket.
2| Unscrew the inserted hose assembly from the suction port with a left-hand rotation.
3| Insert the main cannula of the hose assembly into the air outlet on the top of the head and tighten it with the right hand rotation.
4| Insert the power cord.
5| Start the switch button.
6| Hold the hose assembly, let outlet port aimed at the leaves and so on.

Using the Accessory

KLARSTEIN-10029113-REINRAUM-Wet-and-Dry-Vacuum-
Cleaner-13 | KLARSTEIN-10029113-REINRAUM-
Wet-and-Dry-Vacuum-Cleaner-14 | |
---|---|---|---
Wet floor nozzle for floor, carpet, etc.| Bristle for Windows, table, etc.| Crevice nozzle for crevice, corner, etc.| Blowing mouth for blowing the dust away in the crevice of the machine.

SOCKET FUNCTION

If you want use the socket function, please open the lid. Then insert the plug into the socket. Depending on the position of the switch, the vacuum cleaner is switched on or off.

I| The socket is not electrified. The vacuum operates.
O| The socket is not electrified. The vacuum is switched off.

II

| The vacuum cleaner is switched off. If the plug is being used by an external device, the vacuum cleaner starts to operate after 5-8 seconds. If the plugged device is being switched off, the vacuum cleaner will run for another 5-8 seconds. This is particularly helpful when using a drilling machine.

CLEANING AND CARE

Barrel Cleaning
After working or when the barrel is full of dust which cause suction decreases considerably, you should cut off the electricity and clean the dust away from the barrel.

Unfasten the locking knob, lift up the top cover.
Take off the filter bag, clean the dust away in the dust barrel.
Install the filter bag back and place the top cover.

Cleaning the HEPA filter
The HEPA filter should be washed with clean, warm water if it is covered with dust. If necessary, use a mild detergent.

Remove the HEPA filter.
Wash it.
Let it dry.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical
and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.