XtremeMac XMG-XM2-03 Apple Watch Charging Cable User Manual
- June 5, 2024
- XtremeMac
Table of Contents
Mac XMG-XM2-03 Apple Watch Charging Cable
User Manual
First of all, thanks sincerely for buying this product
- For your safety, please read this manual carefully before using this product
- Please make sure that write down the selling date and sales shop’s name on the warranty, and put it away with the operation manual, keep them properly
Scope of application
This charging is suitable for a Wireless charger.
Standard Accessories
Wireless charger1
User manual1
Technical Data
Product Name: Wireless charger
Model：XMG-XM2-03，WI095001
Input: DC 9V/3A OR PD25W(9V/2.77A)
Output 1 MagSafe: 15.0W Max
Output 2 Wireless: 5.0W Max
Total: 20.0W Max
Usage
- Before charging the device, check whether the technical parameters (voltage and current) of the device match the characteristics of wireless charging.
- Place the device into the wireless charging port.
- Plug the wireless charger into the charging device (DC 9V/3A OR PD25W(9V/2.77A)). Your device is about to start charging.
- Disconnect the wireless charging and charging device ports after use.
Attention
-
This product requires the correct installation of the DC 9V/3A OR PD25W(9V/2.77A) charger.
-
Only plug the cord of the product into easily accessible sockets, from which you can quickly disconnect the product if a problem occurs.
-
Do not use the product if it is damaged. Never touch the product with wet or damp hands.
-
Do not use the product in a humid room or in the rain.
-
Never place any metal objects such as keys or paper clips into the product openings.
-
To avoid malfunctions or damage to the product, do not let the product drop, do not squeeze the product, and do not cut the product surface or put too much pressure on it. Protect the product from excess humidity, water, and other liquids. If the product comes into contact with water, excess humidity, or other liquids, do not use it otherwise there is a risk of electric shock.
-
Do not expose the product to heat sources, or direct sunlight, do not place it on heaters, stoves, or other heat sources such as a dashboard in a car in the summer.
-
Do not use the product unattended. The surface of the product may get hot during operation.
-
Do not cover the product with any objects during operation.
-
Do not use the product immediately when it is moved from a cold area to a hot area. Water condensation can occur and may damage the product. Wait till the product reaches room temperature. It may take several hours.
-
Do not attempt to modify, repair or disassemble the product in any way. If the product is damaged, do not use it.
-
Never use aggressive detergents, alcohol, or other chemical cleaning solutions, as they may damage the surface or functionality of the product.
-
Disconnect all attached cables before cleaning.
-
Do not immerse the product in water or other liquid. There are no user-serviceable parts inside the product.
-
Never disassemble the product. Keep the product out of the reach of children.
Never allow children or people with disabilities to use electrical appliances without supervision. -
Make sure the children do not play with the plastic wrapper. They can swallow small parts and suffocate.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide
reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.