SEECODE 233954 Folding Wheelbarrow Instruction Manual
- June 12, 2024
- SEECODE
Table of Contents
SEECODE 233954 Folding Wheelbarrow Instruction Manual
Scope of delivery
Assembly instructions
BEFORE mounting the wheel, pull the axle bracket through the loop at the narrow end of the tarpaulin. The bend of the axle bracket must point downwards.
Put left and right handle and extension tubes together and pass them through the loops on the sides of the fabric tarpaulin. This is how you distinguish left and right handle: The threaded hole underneath the handles must face outwards in order to attach the tarpaulin to it later with the two Phillips screws.
Attach the tubes to the wheel suspension using the 4 spring ball pins.
Attach the fabric tarpaulin to the handles using the Phillips screws.
Attach the wheel to the wheel suspension using the wheel axle and cotter pin in this order:
- Put the axle into the first hole of the wheel suspension with the bend downwards.
- Put the washer on the axle.
- Push the axle through the wheel hub.
- Put the washer on the other end of the axle.
- Put the axle through the second hole in the wheel suspension.
- Insert the cotter pin through the hole in the side of the axle.
- Then bend the cotter pin legs to fit the axle.
**** Check type pressure, please fill with max. 2.0 bar.
Open for easy filling and close the back flap for transport using the two rubber band eyelets.
Folding the wheelbarrow: Remove the front spring ball pins, bring the handle pieces together and insert the pins into the axle holder.
Warranty:
The warranty period is 24 months from the date of purchase. This includes a
6-month guarantee from the date of purchase.
The territorial scope of the warranty protection is Europe-wide.
The proof of purchase is valid as proof of this. The product has been
thoroughly checked for quality and functionality before dispatch.
The guarantee is excluded in the following cases:
- in the event of modifications to the system without our approval
- in the case of use other than that stated above
- in the event of damage caused by falling
When making a claim under the guarantee/warranty, please return the complete
product in transport-safe packaging to the point of sale from which the
product was purchased.
Describe the detected defect in the product and enclose the original proof of
purchase with the shipment.
The seller reserves the right to remedy the defect before refunding the
purchase price.
Necessary transport costs will be reimbursed to the customer if a justified
claim under the statutory guarantee/warranty is established.
The use of the legal rights for defects is free of charge. These are not restricted by the guarantee.
Mobiset GmbH | Rösrather Straße 333 | 51107 Köln
www.mobiset.de | Tel.: +49 221 / 98952-20
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>