SEECODE Car Cup Cooler Heater User Manual
- June 4, 2024
- SEECODE
Table of Contents
Car Cup Cooler / Heater
User Manual
Car Cup Cooler Heater
This document is protected by copyright. Any reproduction or reprint, even in parts, and any reproduction of the illustrations, even in a changed state, is strictly prohibited without the written consent of the manufacturer.
Information on environmental protection
- The packaging material used is recyclable. Dispose of packaging material that is no longer needed in accordance with the locally applicable regulations.
- This product must not be disposed of in the normal household waste within the European Union.
- Dispose of the device via the communal collecting points.
Guarantee/Warranty
This product has been thoroughly checked for quality and functionality before dispatch. 12 CAN month warranty from the date of purchase for the speaker, and 6 months for the integrated battery. We will replace or repair defective products free of charge during the guarantee period. The guarantee is not extended in the course of a repair or an exchange, exchanged parts become our property. Please contact us before sending a guaranteed consignment.
The guarantee is excluded in the following cases:
- in the case of faulty installation,
- in the case of changes to the system without our approval, in the case of damages due to moisture, damages caused by dropping or damaged cables,
- if there is no proof of purchase
Declaration of conformity
The CE declaration of conformity for this product can be downloaded from our
website: www.seecode.de or
www.mobiset.de
Symbols used
WARNING
Is used for a possible dangerous situation that could lead to serious injuries
or death. Follow the instructions given here in order to avoid danger. A note
marks additional information which facilitates the handling of the product.
Intended use
The device is only intended for cooling and heating beverages. Any other use
or use beyond what is specified is regarded as not intended.
Warning
The device can be dangerous in the case of unintended use and/or different
use:
- Only use the device as intended.
- Comply with the procedures described in these operating instructions.
- Claims of any kind due to damages as a result of unintended use are excluded.
- This risk is borne exclusively by the operator.
Limitation of liability
All technical information, data, and notes for connection and operation contained in these operating instructions correspond to the latest status during printing and are carried out to the best of our knowledge, taking into consideration our experience and knowledge up to now. No claims can be derived from the data, illustrations, and descriptions in these operation instructions. The manufacturer does not assume any liability for damages due to non-compliance with the operating instructions, non-intended use, improper repairs, unauthorized changes or use of unauthorized spare parts.
Basic safety information
- Check the device for any visible external damage before use. Do not put into operation a damaged or fallen device.
- Persons, who are not in a position to safely operate the product due to their physical, mental, or motor skills, may only use the device under supervision or instruction by a responsible person.
- Children are only allowed to use the device under supervision.
- The device may only be repaired by authorized specialized companies or customer service. Improper repairs can lead to significant dangers for the user, and to the expiry of the warranty claim.
- Protect the device from moisture and the penetration of fluids.
- Avoid direct sun radiation
Requirements concerning the installation site
For the safe and faultless operation of the device, the installation site has
to meet the following requirements:
- The device has to be placed on a firm, flat and horizontal base.
- Do not place the device in a hot, wet, or very wet environment or near flammable material.
Unpacking
- Take the device and the operating instructions out of the cardboard box.
- Remove all packaging materials and protective films from the device before first use, especially, where applicable, the protective film at the bottom side of the device.
- Store the original packaging during the warranty and/or guarantee period of the device so that you can dispatch the device in case 28 CAN EN of warranty and/or guarantee properly packed. Transport damages will cause to the expiration of any guarantee rights.
Checking the scope of delivery
Check the content for completeness and visible damages. Immediately inform
your supplier about any incomplete or damaged delivery.
Product Overview
Accessories
1 x Charging cable for the cigarette lighter
1 x Instruction Manual
Specifications
Connector: 12V / 3A
Power: 36W
Measurements: 105 x 105 x 183 mm (LxBxH)
Diameter outside (top): 97,3 mm
Diameter outside (bottom): 74,9 mm
Diameter inside: 68,3 mm
Weight: 473 g
Operating Instruction
-
Plug the charging cable into the See code Cup Cooler Heater and the other end into the cigarette lighter socket of your car or any other similar connector.
-
Please choose one of the following modes:
a. Press the cooling function button to cool beverages. The button turns light blue.
b. Press the heating function to warm up beverages. The button turns lightly red. -
To switch off the device, click on the respective mode again.
Note:
- For a good result, use bottles, cans, cups, etc. that fit perfectly in the holder.
- For regular beverages, the average cooling and heating time is about 30 minutes or more.
Mobiset GmbH – Rösrather Straße 333 – 51107 Köln
Tel.: +49 22 19 89 52 0 – Fax: +49 22 19 89 52 39
CE This product is in accordance with all relevant regulations of the
European parliament. The full CE declaration with all applied test
standards can be found as a download on our homepage
www.seecode.de or
www.mobiset.de
References
- Mobiset – Your Innovation Partner
- Mobiset – Your Innovation Partner
- SEECODE – DESIGN | LIFESTYLE
- SEECODE – DESIGN | LIFESTYLE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>