TMICE TKM01A Dido Multifunctional Bluetooth Mouse User Manual

TMICE TKM01A Dido Multifunctional Bluetooth Mouse

Product Overview

1. Play/Pause Button
2. Power Indicator
3. Scroll Wheel
4. Left Button
5. Right Button
6. Backward Button
7. Forward Button
8. 2.4G Indicator
9. Bluetooth Indicator (PC)
10. Bluetooth Indicator(Phone)
11. Mode
12. DPI
13. Power Switch
14. 2.4G Receiver

• After the boot connection is successful, switch the usage mode of BT1/BT2/2.4G according to the button shown

Connection guide for PC

1. Connected with 2.4G
2. Take out the receiver from t he base and insert it into the PC USB in the face. Turn the power switch to ON. The Connect ion is completed when the 2.4G white indicator turns off after keeping on for a while.
3. Connected with BT(Bluetooth)
4. Turn the power switch to ON, briefly press the mode button to keep it on the BT mode for PC.Hold and press the mode keys for 3 seconds,the white BT indicator for PC will flash.On your PC, open the BT interface and connect “TMICE D1 VIDEO”.Connection is completed after the BT indicator is always on.
5. Reset the BT connection. Keep holding and press the scroll wheel, turn the power switch to ON. The connection is reset after the 2.4G and BT indicators(PC) flash.

Connection guide for Phone

1. Connected with 10S device
2. New 105 device connection
3. Turn the power switch on ON.the orange BT indicator (Phone) will flash.
4. Enter the 10S system settings and open the BT connection interface. Connect”TMICE D1 VIDEO”. Connection is completed when the orange indicator keeps on.
5. After successful connetion with the phone,enter the phone system settings and open the Accessbility interface to find the “touch” button.Click the touch button and find the AssistiveTouch button.Open it, then you can find and adjust the “Tracking sensitivity”to the middle position(Tracking sensitivity depends on the size of the phone,and the setting could be slightly different). Please note: if the video cannot be played /paused normally when pressing the play/pause button, you are suggested to adjust the “tracking sensitivity”to solve it.
6. Other 10S device connection method
7. Enter the connected 10S system settings,find the BT “TMICE Dl VIDEO” t hen click Forget This Device.Then the orange bluetooth ind icator(Phone) will flash.
8. The new device can be connected by referring to the method 1.1.
9. Connected w ith Android Device
10. New Android device connection
11. Turn the power switch to ON, the orange BT indicator (Phone) will flash.
12. Enter the Android system settings and open the BT connection interface. Connect”TMICE D1 VIDEO”. Connection is completed when the yellow indicator keeps on.
13. Other Android device connection method
14. Enter the connected Android system settings,find the BT”TMICE Dl VIDEO” then click Forget This Device.Then the orange bluetooth indicator(Phone) will flash.
15. The new device can be connected by referring to the method 2.1.

Social media button function

(Applicable to v ideo APP such as TikTok, etc.)

• When this mouse is connected with the Phone, following operations are supported in the social media APP.

FCC statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV tech nician for help.

l year limited warranty.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction w ith any other antenna or transmitter.

Product specification & Compatibility

• Name: Dido Multi-functional Bluetooth Mouse
• Model: TKMOlA
• Size: 108.>8.6:>.84·3 t .38mm
• Weight: 74g
• Rated Input: 3.7v
• Rated Power: 0.055w
• Lithium battery capacity: 500mA

Compatibility

• Require: USB Port
  • Windows e XP or later
  • macOS 10.15 or later

Require: Bluetooth low-energy consumption

• Windows 8 or later
• macOS 10.15 or later
• iOS 13.4 or later

User notice

Please read and preserve this manual carefully before using the product.

Symbol Description

To avoid any personal injury or property loss, please be sure to comply with the following contents.

• Don’ts
• Do’s

Safety notes

• Do not put it in water.
• It’s forbidden for children under three years old to use the product to prevent accidental eating of the parts.
• Do not put the product on fire.
• Do not drop the product intentionally.
• Please charge the product on t ime if the low power indicator is activated or no lighting when turn the power switch to ON.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>