Quin Technology D30 Small Label Printer User Manual

**Quin Technology D30 Small Label Printer User Manual

**

Please read this Instruction carefully before using this product and keep it properly.

Packaging List

1. Printer*1
2. Product Instruction*1
3. Data cable*1

Device Parameter

Lithium battery
Supported operating system| Android
ios

Component instruction

Appearance Introduction

• Power Button
• Indicator light
• Paper compartment cover
• Cover Buckle
• Decorative window
• Paper outlet
• Charging port
• Sling hole

Introduction of the function of the power button

Power indicator status

Green

| Keep on| normal status (printing)
Flash slowly| Charging with power on
Flash quickly| charging with power on
Red| Keep on| error (lack of paper, cover opened, high temperature)
Flash slowly| 10% battery
Flash quickly| 5% battery

Introduction of paper roll installation

1. Please open the paper compartment cover
2. Disassemble the label paper and put into the paper compartment
3. Please pull out the paper out of the paper outlet 5mm
4. Close the paper compartment cover and connect with the App to use
5. Search Print master on App Store or Google Play to Get the App
6. Product warranty

Thank you for choosing the small label printer

1. The free warranty period of this product is one year from the date of purchase (subject to the date of the official purchase invoice).
2. Please keep the warranty card properly, which will not be reissued in case of loss
3. Please keep the warranty card properly, which will not be reissued in case of loss

Non-warranty Regulations

The warranty is void under the following conditions·

1. Exceeding tuhe warranty period.
2. Not presenting the original warranty/maintenance card
3. Presenting a damaged warranty /maintenance card ( e.g. tearing or tampering )
4. Damage caused by unauthorized repair, disassembling, etc.
5. Damage cauasd by human error .
6. Damage caused by naturel disasters such as earthquakes ,floods, windstorms ,lightning strikes or externai disasters such as fires and houas collaps as .
7. Failure o damage causad by harsh conditions (oil, moisture, direct sunlight etc .)or failure to use or care for as outlined by the instruction manual .

FCC Caution

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment . This equipment has been tested and found to comply with the limits for Class B digital device ,pursuant to Part 15 of the FCC Rules .These limits are designed to provide reasonable protection against harmful interference in a residential installation .This equipment generates uses and can radiate radio frequency energy and ,if not installed and used in accordance with the instructions ,may cause harmful interference to radio communications .However ,there is no guarantee that interference will not occur in a particular installation .If this equipment does cause harmful interference to radio or television reception ,which can be determined by turning the equipment off and on ,the user is encouraged to try to correct the interference by one or more of the following measures :

• Reorient or relocate the receiving antenna .

• Increase the separation between the equipment and receiver .

• Connect the equipment into an outlet on a circuit different from that
  to which the receiver is connected .

• Consult the dealer or an experienced radio /TV technician for help

This device complies with part 15 of the FCC rules .Operation is subject
to the following two conditions
(1)this device may not cause harmful interference ,and (2)this device must accept any interference received ,including interference that may cause undesired operation .

Warranty /Maintenance Card

Replace
Return
Repair
User Information
Name :
Gender:
Phone :
Address :
Product Information
Date of purchase :
Product order number :
Product serial number :
Reason for Return(Replace/Repair/Request Mantenance )
Fault description :
Maintenance Records :
Fault conditions :
Maintenance staff
Processing situation :
Repair date
Repair ticket number :
Date of inspection :

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>