TOBENONE UDS015D-Silver USB-C Triple-Display Docking Station User Guide

TOBENONE UDS015D-Silver USB-C Triple-Display Docking Station

THANK YOU!
Thank you for your purchase of the Tobenone Triplt-Display Docking Station UDS-015D.Our dock provides the ability to connect three I monitors through two HDMI and one VGA inter­ face, SD&Micro SD Card Reader,3.5mm AudioI & Microphone, USB-A 3.0, USB-C PD3.0,RJ45 Gigabit Ethernet to your USB C laptop via one USB C cable.

Ports and connectors

1. USB-C: connect to host

2. LED indicator

3. SD&Micro SD Card Reader
   Read: 50-104MB/s, Write: 30-80MB/s,
   ( Data transfer rates are subject to the speed of the memory card itself and your computer’s USB ports.)

4. 3.5mm Audio & Microphone

5. USB-A 3.0 (data + downstream charge): SGbps, 5V/0.9A @4.SW

6. HDMI 1:
   4Kx2K 60Hz / 3840×2160 (work separately while source is DPl .4) 4Kx2K 30Hz / 3840×2160 (work separately while source is DP 1 .2)

7. HDMI 2: 4K@30Hz

8. VGA: Up to 1080P 60Hz.

9. USB-C PD3.0: Upstream charging the source devices such as Laptop/Notebook, charging limited to 87-96W for safety and affected by different firmware. Support 1 00W power adapter

10. RJ45 Gigabit Ethernet: 1 O00Mbps
    For any inquiries, please contact us: [email protected]

USING INSTRUCTION

• Step 1 : Connect the Powe Cord to the Universal Power Adapter
• Step 2: Connect the Universal Power Adapter to PD port(Port®)
• Step 3; Connect the dock and your laptop via USB C to USB C cable as provided
• Step 4: Connect monitors and VGA via HDMll (Port@)/HDMI2(Port(Z))/VGA(Port@), cables are not included
• Step 5: Install initiate lnstant View to display:

1. Firstly, connect the docking station to the laptop via USB cable, and you will see a disk named “INSTANTVIEW”
2. Double click and open the file, according to your system choose the proper application and complete the driver installation within seconds
3.  For macOS, the app will require a screen recording permission to capture pixels and send them to your external monitors: Apple Menu-> System Preference-> Security & Priva­cy->select “Privacy” tab->Scoll to find “Screen Recording” and check “macOS lnstantView”  

NOTE: The INSTANVIEW app doesn’t store or record any screen content.

4. Click lnstantView APP, and it will enable external displays immediately.

• Step 6: Attach USB3.0 DEVICES to the front USB3.0 Port(Port5),insert SD card,TF/Micro SD card into SD/TF slot(Port@)
• Step 7 : Connect speaker/headphone or microphone to the front audio port(Port4) .Con­nect the Ethernet cable to RJ45 Ethernet port(Port@)J

Troubleshooting

• No Dlsplay output via HDMll

1. Please ensure your laptop’s USB-C port supports Power Delivery, DisplayPort, and Data transfer
2. Please check if the connection between the monitors.dock and laptop is tight
3. Please use standard HDMI cable, HDMI to HDMI is recommended

• NO audio output from monitor

1. Please make sure your monitor supports audio output function
2. Set the external monitor as default audio output device  

Register your product for a FREE upgrade to a 24-Month Warranty: www.tobenone.com/warranty

QR CODE
Scan qr code for more info

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>