mobvoi CXH-A Ticpods Bluetooth Earbuds ANC User Manual
- June 5, 2024
- Mobvoi
Table of Contents
- mobvoi CXH-A Ticpods Bluetooth Earbuds ANC
- What’s in the box
- Main user interfaces
- Instructions Before Using
- Bluetooth Pairing
- Cancelling earbuds connection
- Touch Control
- Tech Specs
- FCC Compliance Statement in the “skin irritation” section in the user
- IC Compliance Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
mobvoi CXH-A Ticpods Bluetooth Earbuds ANC
What’s in the box
Main user interfaces
Earbud
- Touch Control Panel
- Pressure-Relief Hole
- LED Indicator & Secondary Microphone
- Microphone
Charging Case
- Charging case LED Indicator (White only)
- Charging case LED Indicator (Green only)
- USB Type-C Charging Port
Instructions Before Using
- When using Mobvoi Earbuds ANC for the first time, check the LED indicator for the battery status.
Charging case LED indicator
Action LED indicator Status
Opening the charging case / Placing earbuds back into the charging case| The
white / green LED on| Ready for use
Flashing white / green light| Please charge the case
LED off
Earbuds LED indicator
LED indicator | Status |
---|---|
LED off | No battery / ANC-Off Mode |
Flashing red light | Low battery (Less than 30%) |
Rapidly-flashing blue light | Ready to pair |
LED indicator Status
Flashing blue light every 5 seconds| Earbud is working
Green LED on for 30 seconds| Quiet Mode
Red LED on for 30 seconds| Sound-Passthrough Mode
Bluetooth Pairing
- Open the charging case and the earbuds will enter Bluetooth pairing mode. The LED indicator will start to flash blue light rapidly.
- Open your phone’s Bluetooth settings, search for Mobvoi Earbuds ANC and pair.
Cancelling earbuds connection
Automatic re-connection:
When the earbuds are placed back into the charging case and the case is
closed, the Bluetooth connection between Mobvoi Earbuds ANC and the device
will stop. When the charging case is opened, Mobvoi Earbuds ANC will
automatically connect back to the same device.
- If you manually unpair in your phone’s Bluetooth settings, automatic re-connection is not supported. Bluetooth connection would have to be re-established manually through the phone.
Connecting to new devices:
- Please unpair in Bluetooth settings of original device, then the earbuds will enter pairing mode.
- Open the new device’s Bluetooth settings, search for Mobvoi Earbuds ANC and pair.
Touch Control
- Touch operations with both earbuds
Function | Left Earbud Operation | Right Earbud Operation |
---|---|---|
Play/Pause | Double tap the Touch Bar | |
Next track | ——- | Triple tap the Touch Bar |
Accept call | Double tap the Touch Bar | |
Hang up / Reject a call | Press the Touch Bar and hold for 2 seconds | |
Voice Assistant | Triple tap the Touch Bar | ——- |
Quiet Mode | Press the Touch Bar and hold for 2 seconds | |
Sound-Passthrough Mode | Press the Touch Bar and hold for 2 seconds on Quiet |
Mode
ANC-Off Mode| Press the Touch Bar and hold for 2 seconds on Sound-Passthrough
Mode
- Touch operations with single earbud
Function | Left Earbud Operation Right Earbud Operation |
---|---|
Play / Pause | Double tap the Touch Bar |
Next track | ——- |
Accept call | Double tap the Touch Bar |
Hang up / Reject a call | Press the Touch Bar and hold for 2 seconds |
Voice Assistant | Triple tap the Touch Bar |
Quiet Mode | Press the Touch Bar and hold for 2 seconds |
Sound-Passthrough Mode | Press the Touch Bar and hold for 2 seconds on Quiet |
Mode
ANC-Off Mode| Press the Touch Bar and hold for 2 seconds on Sound-Passthrough
Mode
Tech Specs
Earbuds
- Size : 19.6×24.6×43.1 mm
- Weight: 5g/pcs
- Earbuds Charging Current: 50 mA
- Earbuds Charging Time: 1.2 hours
- Working Voltage: 3.3V~4.2V
- Music Time (Quiet Mode): around 4.5 hours
- Music Time (ANC-Off Mode): around five hours
- Talking Time (Quiet Mode): around 4.5 hours
- Talking Time (ANC-Off Mode): around 5 hours
- Standby Time in Quiet Mode: 7 hours
Earbuds Speaker
- Speaker specifications / mode Φ13mm :Φ13mm
- Sensitivity :100dB±2dB
- impedance : 32Ω/TYP
- Charging Case
- Size: 26.1×60×62.2 mm
- Weight: 42g
- Charging Port: USB-Type C
- Charging base (full): Enables more than 2 full charges on the earbuds
- Charging Time: 1.5hrs
- DC input: 5V/1A
- Charging case battery: 3. 7V 400mAh
Warranty and Service
Please read the MOBVOI LIMITED WARRANTY carefully before using the product at
www.mobvoi.com/pages/limited warranty
More information and services importer: Mobvoi Inc. Please check out our
official website to learn more. www.mobvoi.com
Please contact us if you experience any problems.
Customer service
support@mobvoi.com
Manufacturer
Shenzhen Angsi Technology Co., Ltd
6/F, Block B, Dingxin Science Park, Hong Lang North No.2 Road , Bao ‘an
District, Shenzhen PRC
We provide a statutory warranty service in the country where you purchased the
device from.
Safety and Precaution
Important safety information
Handle Mobvoi Earbuds ANC and the charging case with care. They contain
sensitive electronic components, including batteries. Do not drop, burn,
puncture, crush, disassemble or expose the device to excessive heat or liquid,
which may cause damage, battery leakage, overheating, and a possible risk of
fire, explosion or personal injury. Please do not use Mobvoi Earbuds ANC
and/or the case if they are damaged.
Bluetooth
The Bluetooth word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Shenzhen Angsi Technology
Co., Ltd is under license. Other trademarks and trade names are those of their
respective owners. To turn off Bluetooth on Mobvoi Earbuds ANC, put them in
the case and close the lid.
Batteries
Mobvoi Earbuds ANC contains: Secondary (rechargeable) Li-ion Polymer
Normal Voltage 3.7V
55mAh 0.204 Wh
Model: BP581113
Date of Manufacture: refer to sales label information
Do not attempt to replace Mobvoi Earbuds ANC or the case’s batteries by
yourself, as it may cause damage to the batteries, which could lead to
overheating and/or personal injury. Any battery servicing should only be
performed by the manufacturer or repair service centers authorized by the
manufacturer.
USB Cable and Charging Case
Avoid prolonged skin contact with the connector when the USB cable is plugged
into a power source because it may cause discomfort or injury. For example,
while the case is charging through the USB cable and the USB cable is plugged
into a power source, do not sit or sleep on the USB connector or place it
under a blanket, pillow or your body. Take special care if you have a physical
condition that hinders your ability to detect heat.
Please only use the manufacture-recommended charging case and charging
accessories for charging. Using incompatible accessories may lead to a risk of
fire, explosion and/or burns. Please do not touch any exposed metallic areas
on both charging case and USB cable when the device is plugged into a power
source to avoid an electric shock. When charging, please ensure that the
charging case, USB cable and earbuds are in a dry environment. Please avoid
touching the charging case, USB cable and earbuds with wet hands and ensure
that they have not been placed in water. A moist environment may cause
electrocution or short circuit, which in turn carries a risk of fire,
explosion and/or burns. In the event that the device overheates, please cease
usage of the device immediately; If the device is currently charging, please
unplug the USB charging cable from the case. Contact
the manufacturer’s after-sales support to receive assistance in order to
prevent burns or possible battery explosion.
Hearing loss
Listening to sound at high volumes may permanently damage your hearing.
Background noise, as well as continued exposure to high volume levels, can
make sounds seem lower than it actually is. Check the volume before inserting
Mobvoi Earbuds ANC in your ear.
WARNING
To prevent possible hearing damage, do not listen at high-volume levels for
long periods of time.
Driving hazard
Use of Mobvoi Earbuds ANC while operating a vehicle is not recommended and may
be illegal in some jurisdictions.
Check and obey the applicable laws and regulations in any specific
jurisdiction on the use of earphones while operating a vehicle. Be careful and
attentive while driving. Stop listening to your audio device if you find it’s
disruptive or distracting while operating any type of vehicle or performing
any activity that requires your full attention.
Choking hazard
Mobvoi Earbuds ANC and the charging case may present a choking hazard or cause
other injuries to small children. Please keep the device out of the reach of
small children in order to prevent them from swallowing or biting the device.
Driving hazard
If there are any special regulations in force in any area forbidding the usage
of any electronic devices, please follow them as Mobvoi Earbuds ANC may cause
interference with other equipment which may increase the risk of accidents and
danger.
Do not use your device in an aircraft, as it can interfere with the aircraft’s
electronic navigational instruments. Please comply with the airline’s rules
and regulations.
Medical device interference
Mobvoi Earbuds ANC and charging case contain components and radios that emit
electromagnetic fields. They also contain magnets. Together, these
electromagnetic fields and magnets may interfere with pacemakers,
defibrillators, and other medical devices. Please abide by the
rules and regulations in certain health
care facilities which prohibit the usage of said devices. When in such places,
either power off the device or maintain a safe distance of separation between
Mobvoi Earbuds ANC, the case and the specified medical device. Should the need
arise to use Mobvoi Earbuds ANC and the medical device simultaneously, please
consult your healthcare provider and medical device manufacturer to obtain
specific and relevant usage information of such medical device. Stop using
Mobvoi Earbuds ANC and the case if you suspect that they are interfering with
your pacemaker, defibrillator or any other medical device.
Skin irritation
Earphones can lead to ear infections if not properly cleaned. Clean the Mobvoi
Earbuds ANC regularly with a soft lint-free cloth.
Do not allow any moisture to seep in any openings, or use aerosol sprays,
solvents, or abrasives as these may cause damage to the device. Please
discontinue usage should a skin problem appear. If the problem persists,
please visit your healthcare provider to seek professional medical advice.
Electrostatic shock
When using Mobvoi Earbuds ANC in an area where the air is very dry, it is easy
to build up static electricity and possible for your ears to receive a small
electrostatic discharge from Mobvoi Earbuds ANC. To minimize the risk of
electrostatic discharge, avoid using Mobvoi Earbuds ANC in extremely dry
environments, or touching a grounded and/ or unpainted metal object before
inserting Mobvoi Earbuds ANC.
Operating environment
It is recommended to use your device at temperatures from -5 °C – 40 °C and
store
it at temperatures from 0 °C – 30 °C. Using or storing your device outside the
specified temperature ranges may result in damage to the device. Please do not
use your device outdoors during rain or thunderstorms in order to prevent
electric shock or device malfunction. Please do not use your device in moist,
rainy, dusty or oily environments
in order to prevent an internal short-circuit. Please do not use or store your
device at refueling points (gas stations) or in potentially explosive
environments.
Please avoid placing the device in liquids
or exposed to a pressurized water stream, for instance during a shower. Please
do
not wear your device when showering or swimming. This may cause the device to
malfunction.
Sweat or liquids present on the charging terminals may cause the earbuds to
decay. Please ensure that both the charging terminals and earbuds are cleaned
before placing the earbuds back into the charging case. Please follow the
instructions set forth in the “skin irritation” section in the user manual
to clean the earbuds.
CE Statements
Hereby, Shenzhen Angsi Technology Co., Ltd declares that this [ Mobvoi Earbuds
ANC, CXH-A] is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at
www.mobvoi.com
EU Frequency: 2.4-2.4835GHz
The maximum RF Power: <100mW
Manufacturer
Shenzhen Angsi Technology Co., Ltd Address: 6/F, Block B,Dingxin Science Park,
Hong Lang North No.2 Road,
Bao’an District, Shenzhen, China
Importer
R E CYC L I N G
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European Directive 2012/19/ EU in order to be recycled or
dismantled to minimize its impact on the environment.
CAUTION
RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
FCC Compliance Statement in the “skin irritation” section in the user
This device complies with Part 15 of the FCC Rules. FCC ID Number is
2AGA6-CXHA. Operation is subject to the following two conditions:
this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Re-orient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is currently connected to
- Consult the dealer or an experienced radio/TV technician for help
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC Compliance Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference
- this device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with FCC and IC radiation exposure limits set forth for
an uncontrolled environment.
This Class B digital apparatus complies with Canadian ICES- 003.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>