NiteRider Technical Lighting EPRO 1000 EV FRONT LIGHT User Guide
- June 5, 2024
- NiteRider Technical Lighting
Table of Contents
NiteRider Technical Lighting EPRO 1000 EV FRONT LIGHT
NITERIDER INITIATIVE
In 2012, NiteRiders’ initiative campaign “Lights 4 Lives” dramatically improved the cycling landscape; sparking awareness for the need to use bike lights for both Day and Nighttime riding. Since then, Daytime Visibility for cycling has been gaining more traction, instilling the idea of added safety for avid cyclists in an age of multi-tasking drivers.
PARTS LIST AND IDENTIFICATION
Please verifty the contents of your EPro lighting system:
- A. Pre-wired EProTM 1000 Front Light
- B. Handlebar Mount
- C. Rubber Shims (3)
INSTALLATION
An authorized electric bike service and repair shop MUST install the EProTM 1000 Front Light.
Installation notes
- EProTM Voltage:
- 12 to 40 Votes 1.2 Amps at 12 Volts, 300 mA at 40 Volts
- Red wire (+), Black wire ()
- Select appropriate rubber shim/s for a secure fit
- Install suggested bike manufacturers plug to wire leads of EProTM 1000 Front Light
- Mount the light at a preferred angle for optimal visibility
OPERATION
- For Electric Bikes with ignition /Power Switch
- The front light will turn ON and OFF with the bike’s “ignition” and will maintain mode memory (will remember last light mode setting).
- Press the power button to change between flash and steady light modes.
- For Electric Bikes without Ignition / Power Switch
- Press the power button to power ON and change from flash to steady light modes.
- Turn light OFF when not in use to conserve battery.
- To power OFF, press and hold the power button.
OPTIMAL VIZ WITH NITERIDER
- While an EPro lighting system will improve and increase your overall visibility and enjoyment of riding, please remember that cycling can be an inherently dangerous activity.
- In addition to using your lighting system properly and riding with extreme caution, NiteRider” urges you to:
- Obey your local traffic laws
- Carry an auxiliary light and emergency supplies
- Make sure the taillight and seat post clamp mount are Security Tastened
PROTECTING YOUR INVESTMENT
The EPROM will perform in wet weather conditions, but submerging it in water wil damage the system,
SUPPORT
If you experience difficulties during product installation or operation,
Nitekider provides tree telephone support on weekdays from 8:00 am to 4:30 pm
(Pacific Time) at 800.466.8366, Ext 4. You may also e-mail us at
help@niterider.com
WARRANTY
- NiteRider stands behind its products with the following warranty: covers any defects in material and housings, covers, mounts and fasteners) and LEDs
- 2-year warranty: Printed circuit boards, switches, and AG adapters
- 1-year Warranty: Rechargeable battery cells obtain warranty service have your original sales receipt,
- Contact the NiteRider Customer Service
- Department at 800,466.8366, Ext. 4 to obtain a Returm
- Merchandise Authorization (RMA) number
- The RMA number must be prominently displayed on the outside of your package.
- The product must be properly packaged to prevent damage in transit.
- For International customers, please contact your local Nitekider Distributor. Go to www.NiteRider.com