DNAKE 3CX communications solution v18 version User Manual

June 5, 2024
DNAKE

DNAKE Logo 3CX & Dnake
User Manual

Establishment of 3CX Server

1.1 Download 3CX

  1. Go to the Official website of 3CX (https://www.3cx.com/) and download the 3CX System v18 version on your computer. DNAKE 3CX communications solution v18 version - FIG 1
  2. After downloading, log in to your 3CX Server.

1.2 Add Users for Indoor Monitor and Outdoor Station

  1. All other settings remain default. The followings are the steps to add Users for Indoor Monitor and Outdoor Station.
    Step 1: Login 3CX Server. Go to the Users page.
    Step 2: Click Add to add users.
    DNAKE 3CX communications solution v18 version - FIG 2 Step 3: After clicking Add, click OK to confirm. A user will be created automatically.
    DNAKE 3CX communications solution v18 version - FIG 3 Step 4: The ID and Password of this user account can be found in Phone Provisioning. Please note that only visible passwords can be copied. ID and Password are useful information we will use in Indoor Monitor and Outdoor Station. DNAKE 3CX communications solution v18 version -
FIG 4

Register Indoor Monitor to 3CX Server

Before you start:

  • Make sure the device is in good condition and all the assembly parts are included.
  • Make sure your network functions well. The Outdoor Station, the Indoor Monitor, and the computer are under the same LAN. Only when they are under the same LAN can they communicate.
  • Download the Remote Upgrade Tool from the link below.
    (https://mega.nz/file/hglDVYxB#6Igsmo031nupq30DosaSxHay0WzwwgFQh5ew521hkAA)

2.1 Network settings

  1. Connect the Ethernet cable to Outdoor Station, Indoor Monitor, and computer. Please keep them under the same LAN.

2.2 Fill 3CX accounts in the Indoor Monitor

  1. The followings are the steps to fill in Proxy, Realm, User, UserID, and Password in the Indoor Monitor.
    Step 1: After the settings, you can double click the IP address of the Indoor Monitor on the page of Remote Upgrade Tool to open the website. You can also put Indoor Monitor’s IP address in the browser’s search bar to log in to its webpage with the account: Admin and password: 123456.
    Step 2: Go to VOIP to fill in Proxy and Realm. Both of their IP address should be 3CX Server’s IP addresses such as Proxy: sip:192.168.0.104 and Realm: 192.168.0.104. DNAKE 3CX communications solution v18 version -
FIG 5   Step 3: Still on the page of VOIP, please fill in User, UserID, and Password of 3CX
    Server’s User you want to distribute to Indoor Monitor. User is the Extension number of 3CX
    Server. UserID is the ID of the Extension and Password is the Password of the extension.
    Remember to tick SIP enable and then Submit after filling in Proxy, Realm, User, UserID, and Password.DNAKE 3CX communications solution v18
version - FIG 6   Step 4: Go to the Main page to check if SIP is OK or not. If SIP is OK, then Indoor Monitor is ready. If SIP is ERR, please make sure numbers are all correctly filled.DNAKE 3CX
communications solution v18 version - FIG 7

Register Outdoor Station to 3CX Server

Before you start:

  • Make sure the device is in good condition and all the assembly parts are included.
  • Make sure your network functions well. The Outdoor Station, the Indoor Monitor, and the computer are under the same LAN. Only when they are under the same LAN can they communicate.
  • Download the Remote Upgrade Tool from the link below.
    (https://mega.nz/file/hglDVYxB#6Igsmo031nupq30DosaSxHay0WzwwgFQh5ew521hkAA)

3.1 Network settings

  1. Connect the Ethernet cable to Outdoor Station, Indoor Monitor, and computer. Please keep them under t he same LAN.

3.2 Fill 3CX accounts in the Outdoor Station

  1. The followings are the steps to fill in Proxy, Realm, User, UserID, and Password in the Outdoor Station.
    Step 1: After the settings, you can double click the IP address of the Outdoor Station on the page Remote Upgrade Tool to open the website. You can also put Outdoor Station’s IP address in the browser’s search bar to log in to its webpage with the account: Admin and password: 123456.
    Step 2: Go to VOIP to fill in Proxy and Realm. Both of their IP address should be 3CX Server’s IP addresses such as Proxy: sip:192.168.0.104 and Realm: 192.168.0.104.DNAKE 3CX communications solution v18 version - FIG
8   Step 3: Still on the page of VOIP, please fill in User, UserID, and Password of 3CX
    Server’s User you want to distribute to Outdoor Station. User is the Extension number of 3CX
    Server. UserID is the ID of the Extension and Password is the Password of the extension.
    Remember to tick SIP enable and then Submit after filling in Proxy, Realm, User, UserID, and Password.DNAKE 3CX communications solution v18
version - FIG 9 ** Step 4: Go to the Main** page to check if SIP is OK or not. If SIP is OK, then Outdoor Station is ready. If SIP is ERR, please make sure numbers are all correctly filled.DNAKE 3CX communications solution v18 version - FIG
10

3.3 Forward settings in the Outdoor Station or Villa Panel

  1. Settings of Apartment Outdoor Station : In the web setting of Dnake Intercom, go to the section “Forward” over there you need to fill in “RoomNo” and “Account No”.
    Rome No is the number you dial in the Outdoor Station.
    Both RoomNo and Account should be the same with the extension you filled in Indoor
    Monitor. For example, both Romeo and Account should be 101 if the extension number (User in VOIP) is 101 in Indoor Monitor. Remember to Submit and then it will show up in the chart below.
    (Both RoomNo and Account can be deleted by ticking up Delete, filling in the numbers you want to delete, and Submit. The number you filled in will be deleted and disappear from the chart below.)DNAKE 3CX communications
solution v18 version - FIG 11After settings, you can dial RoomNo in the Outdoor Station to call the corresponding Extension.

  2. Settings of Villa Panel: In the web setting of Dnake Intercom, go to the section “Forward” over there you need to fill in “RoomNo” and “Account No”.
    Room No in the Forward page should be the same as the RoomNo on Villa Panel on the Device page.DNAKE 3CX communications solution v18 version - FIG
12   The account should be the same as the extension you filled in Indoor Monitor. For example, the Account should be 101 if the extension number (User in VOIP) is 101 in Indoor Monitor.
    Remember to Submit and then it will show up in the chart below.
    (Both RoomNo and Account can be deleted by ticking up Delete, filling in the numbers you want to delete, and Submit. The number you filled in will be deleted and disappear from the chart below.)DNAKE 3CX communications
solution v18 version - FIG 13After settings, you can press the button in the Villa Panel to call the corresponding Extension.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals