RORSOU A6 Wireless ANC Headphones User Manual

RORSOU A6 Wireless ANC Headphones

Product Information

Specifications:

• Model: A6
• Items Included:
  1. One USB Charging cable
  2. One 3.5MM Audio Cable
  3. One User Manual
  4. One Wireless ANC headphone
  5. One Travel Protective Storage Bag

Product Usage Instructions

Bluetooth Mode Operation:

To pair the headphones via Bluetooth:

1. Long press the power button for three seconds to start up the headphones.
2. The headphones will enter pairing mode automatically. The indicator light will flash blue and red.
3. Turn on your smart device’s Bluetooth and select “RORSOU A6” from the available devices. No password is required.
4. Once successfully paired, a tone “Connected” will be heard, and the LED indicator will turn blue.

Button Descriptions:

• Play/pause music: Short press the play/pause button.
• Last/next song: Long press + for next song, long press – for previous song.
• Volume control: Short press + to increase volume, short press – to reduce volume.
• Voice assistance: Triple press the button to activate voice assistance.
• Answer/end/reject calls: Short press to answer/end calls, long press to reject calls.
• Power off: Long press the power button for 3 seconds to turn off the headphones.

Mode Switching:

• Transparent Mode: Short press ANC button to switch, indicated by green light.
• ANC Mode: Short press ANC button again to switch, indicated by green light.
• Low Latency Mode: Press the button five times for game mode, press again for music mode.
• Aux-in Mode: Insert an Aux-in line to switch to Aux-in playing mode.

LED Indicator Light Status:

• Charge Status: Red light while charging, blue when fully charged.
• Pairing Status: Alternating blue and red flashing light during pairing.
• Playing Status: Blue LED indicator flashes once every 5 seconds.

Note : Ensure to turn off the headset if no pairing connection is established. Avoid other operations during the Bluetooth search. Use proper volume to prevent ear damage. Charge the headset after long periods of non- use.

Frequently Asked Questions (FAQ):

Q: How do I clear the pairing of connected devices?
A: Long press the + and – buttons simultaneously for 3 seconds to clear the original pair of connected devices.

Product Parameters

• Bluetooth Version: V5.3
• Support：a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap profile Working Distance Range: 10m
• ANC Frequency Range: 20-1000 HZ
• ANC Noise Value:-30±3db
• Working frequency Range: 2.402 GHz–2.480 GHz
• Battery Specifications: 3.7V/600mAh
• Charging Voltage: 5V/1A
• Charging Time: about 2.5 hours
• Working time (Bluetooth only): about 60 hours
• Working time (ANC only)： about 60 hours
• Working time (Bluetooth and ANC): about 35 hours

Items Included:

1. One USB Charging cable
2. One 3.5MM Audio Cable
3. One User Manual
4. One Wireless ANC headphone
5. One Travel Protective Storage Bag

Bluetooth mode operation

Bluetooth pairing: long press“ ” for three seconds; voice prompt “power on” to start up the Bluetooth headphones; it will enter pairing mode automatically; voice prompt “Bluetooth mode”， indicator light flash with blue and red. Turn on the smart device’s Bluetooth searching function and select the device “ RORSOU A6 ”， no password is required, after successfully pairing, a tone “Connected” will be heard, and the LED indicator light will turn blue.
Clear pairing:long press the “+”and “- ”for 3s at the same time to clear the original pair of connected devices.

Button Description

1. Play/pause the music: short press “ ”to play or pause the music
2. Last/next song: long press “+ ”for 2 seconds to the next song; long press “－”for 2 seconds to the previous song
3. Volume contral: short press “+” for increasing volume; short press “－” for reducing volume
4. Voice assistance:triple press“ ”to active the voice assistance
5. Answer the call: short press “ ”when calls coming
6. End of the call: short press “ ”when calls ending
7. Reject the call: Long press “ ”for 2 seconds when calls coming
8. Power off: long press “ ”for 3 seconds to turn off the headphone

TRANSPARENT MODE/ANC MODE

• Transparent mode：short press“ ANC”button to switch the transparent mode,voice prompt mode”,the indicator light will turn to be green.
• ANC mode：short press “ ANC”button again to switch the ANC mode,voice prompt “ANC mode”,the indicator light will turn to be green.

Low latency mode

• Press“ ” for five times to enter the low latency game mode,voice prompt “Game mode”.
• Press“ ” for five times again to switch the music mode,voice prompt “Music mode”.

Aux-in mode
When the headset is on other mode,insert the Aux-in line,it will switch to Aux-in playing mode.

LED indicator light Status

Note:

• If no pairing connection after the Bluetooth headset enters the pairing mode, please turn off the headset to save power.
• Do not perform other operations when searching Bluetooth to prevent the program error.
• Please select a proper volume while using to prevent damage to your ears.
• Please note that a good environment for using the Bluetooth headsets can avoid damage to the headsets.
• Please charge the headset after a long time none-use.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur iin a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure condition without restriction. without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>