blink Weather Resistant Power Adapter Instructions

: June 1, 2024
: blink

Table of Contents

blink Weather Resistant Power Adapter
Product Information
Product Usage Instructions
IMPORTANT PRODUCT INFORMATION
PRODUCT SPECIFICATION
LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

blink Weather Resistant Power Adapter

blink-Weather-Resistant-Power-Adapter-PRODUCT

Product Information

Specifications

Compatible with Blink devices
Hot surface warning for power adaptor
No on/off button – unplug to stop power flow
Caution for using ladders when mounting

Product Usage Instructions

Safety Information
Read and follow all safety information provided before using the device to prevent fire, electric shock, or other injuries.

Compatibility
Use only with compatible Blink devices. Refer to the detail pagefor your accessory on https://support.blinkforhome.com/indoor-outdoor-accessories for device compatibility.

Strangulation Hazard
Avoid placing cables within reach of young children to preventstrangulation incidents.

Choking Hazard
Keep small parts and accessories out of reach of small children to prevent choking hazards.

Hot Surface Caution
The power adaptor may become hot during operation. Wait for half an hour after unplugging before handling to avoid burn hazards.

Electric Shock Risk
To reduce the risk of electric shock, always unplug the power cord to stop power flow into the device.

Additional Safety Tips
Avoid overloading wall sockets by plugging multiple devices into the same socket to prevent overheating and potential fire hazards. Take care when using ladders to mount the product to prevent falls.

FAQ

Q: How do I recycle the device properly?
A: Make sure to dispose of or recycle the device in accordance with local laws and regulations. Visit www.amazon.com/devicesupport\ for recycling information.
Q: Where can I find additional safety and compliance information?
A: Refer to the Legal and Compliance section in the About Blink menu in your app or visit https://blinkforhome.com/safety-and-compliance for more details.

IMPORTANT PRODUCT INFORMATION

SAFETY INFORMATION
READ ALL SAFETY INFORMATION BEFORE USING THE DEVICE. FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. DANGER — TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, FOLLOW THESE INSTRUCTIONS CAREFULLY.

DO NOT force the adapter into a power outlet.
DO NOT expose the adapter, metal connectors, or cable to liquids.
If the adapter or cable appears damaged, discontinue use immediately.
Be sure to hold the plug, not the cable, when plugging in or out. Grabbing the cable may damage the wire or cause problem.
DO NOT install when it is raining.
DO NOT install on a hot surface or metal surface (one that stores heat).
Ensure the cable is securely fastened along its length and be aware of hazards from a weed whacker, hedge trimmer, or similar equipment.
DO NOT expose the adapter to corrosive materials

Use only with compatible Blink devices.
For device compatibility, please see the detail page for your accessory on https://support.blinkforhome.com/indoor-outdoor-accessories.
WARNING : Strangulation Hazard. Children have strangled in cables. Keep out of reach of young children.
WARNING : Small parts contained in your device and its accessories may present a choking hazard to small children.

CAUTION : HOT SURFACE
The surface of the power adaptor may get hot to touch during operation. To protect against possible burn hazard, wait one-half hour after unplugging from the mains before handling.

WARNING : Risk of Electric Shock.

Your adapter is raintight and meets IP67 test conditions under IEC 60529, and can withstand outdoor use and contact with water under certain conditions. When used with compatible Blink devices, refer to the IP rating of the device into which the adapter is plugged. Do not plug the power adapter into an outdoor socket without first ensuring it has appropriate weather resistance for outdoor use.
Always ensure socket is easily accessible and located near the Blink device that it is powering.
Install only to a covered Class A GFCI electrical socket that has an enclosure that is weatherproof with the attachment plug cap inserted or removed.
Not for use with electrical sockets that are weatherproof only when the socket is covered (attachment plug cap not inserted and electrical socket cover closed).

Your adapter is not intended for underwater use and may experience temporary effects from exposure to water. Do not intentionally immerse your adapter in water. Do not spill any food, oil, lotion, or other abrasive substances on your adapter. Do not expose your adapter to pressurized water, high velocity water, or extremely humid conditions (such as a steam room). Do not expose your adapter to salt water or other conductive liquids. To protect against electric shock, do not place cord, plug, or adapter in water or other liquids. If your adapter gets wet from immersion in water or high pressure water, carefully disconnect all cables without getting your hands wet and wait for them to dry completely before powering it on again. Do not attempt to dry your adapter with an external heat source, such as a microwave oven or a hair dryer. To avoid risk of electric shock, do not touch your adapter or any wires connected to your device during a lightning storm while your device is powered. If your adapter is dropped or otherwise appears damaged, discontinue use immediately, as the waterproofing of the adapter may be compromised.

Other Safety Considerations
Your device does not have an on/off button. If you wish to stop power from flowing into your device, unplug the power cord. Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat and may result in a fire.
CAUTION : To reduce the risk of falling, take extra care when using a ladder or similar equipment to mount the product.

PRODUCT SPECIFICATION

Model Number: BAH0410U
Adapter Made By: Dongguan Aohai Technology Co. Ltd.
Input Rating: 100-240Vac, 50/60Hz, 0.35W
Output Rating: 5.0Vdc, 2.0A, 10.0W
UK Fuse Rating: 3A BS 1362 fuse
Average Active Efficiency: 81.94%@230Vac
No-load Power Consumption: 0.071W@230Vac
Operating Temperature Range: -20°C to 50°C (-4°F to 122°F)

RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon.com/devicesupport.

Additional Safety and Compliance Information

For additional safety, compliance, recycling, and other important information regarding your device, please refer to the Legal and Compliance section of the About Blink menu in the Settings in your app or on the Blink website at https://blinkforhome.com/safety-and-compliance

TERMS AND POLICIES
Before using the Blink device (“Device”), please read the terms and policies for the Device located in your Blink Home Monitor App in About Blink > Legal Notices (collectively, the “Agreement”). By using your Device, you agree to be bound by the Agreement. In the same sections, you can find the Privacy Policy which is not part of the Agreement.
BY PURCHASING OR USING THE PRODUCT, YOU AGREE TO BE BOUND BY THE TERMS OF THE AGREEMENT.

LIMITED WARRANTY

This warranty for the Blink device (“Device”) is provided by the entity set forth below. The provider of this warranty is sometimes referred to herein as “We”. We warrant the Device against defects in materials and workmanship under ordinary consumer use for two years from the date of original retail purchase. During this warranty period, if a defect arises in the Device, and you follow the instructions for returning the Device, we will, at our option, to the extent permitted by law, either (I) repair the Device using either new or refurbished parts, (ii) replace the Device with a new or refurbished Device that is equivalent to the Device that is to be replaced, or (iii) refund to you all or part of the purchase price of the Device. This limited warranty applies, to the extent permitted by law, to any repair, replacement part, or replacement device for the remainder of the original warranty period or for ninety days, whichever period is longer. All replaced parts and Devices for which a refund is given shall become our property. This limited warranty applies only to hardware components of the Device that are not subject to accident, misuse, neglect, fire or other external causes, alterations, repair, or commercial use

Instructions
For specific instructions about how to obtain warranty service for your Device, please contact Customer Service using the contact information found at www.blinkforhome.co.uk under the ‘Support’ tab. In general, you will need to deliver your Device in either its original packaging or in equally protective packaging to the address specified by Customer Service. Before you deliver your Device for warranty service, it is your responsibility to back up any data, software or other materials you may have stored or preserved on your Device. It is possible that such data, software, or other materials will be lost or reformatted during service, and we will not be responsible for any such damage or loss. This limited warranty gives you specific rights. If you are a consumer, you may have additional rights under applicable law, and this limited warranty is provided in addition to, and without prejudice to, your consumer rights.

WARRANTY PROVIDER

If you purchased your Device from Amazon.co.uk, Amazon.de, Amazon.fr, Amazon.it, Amazon.es, Amazon.nl, or from authorized resellers located in Europe, this warranty is provided by Amazon EU S.à r.l., 38, avenue John F.Kennedy, L-1855 Luxembourg.
ADDITIONAL INFORMATION
You can find the Customer Service contact information and other applicable terms and Device information (including in other languages)at https://support.blinkforhome.com/
©2024 Amazon.com, Inc. or its affiliates, Amazon, Alexa, Blink, and all related marks are trademarks of Amazon.com, Inc. or its affiliates.