AJAX AJ-KEYPAD KeyPad User Manual

: June 5, 2024
: ajax

AJAX AJ-KEYPAD KeyPad

KeyPad is a wireless indoor touch-sensitive keyboard for managing the Ajax security system. Designed for indoor use. With this device, the user can arm and disarm the system and see its security status. KeyPad is protected against attempts to guess the passcode and can raise a silent alarm when the passcode is entered under duress. Connecting to the Ajax security system via a secured radio protocol KeyPad communicates with the at a distance of up to 1,700 m in line of sight.

WARNING: KeyPad operates with Ajax hubs only and does not support connecting via Oxbridge Plus or cartridge integration modules.

The device is set up via the Ajax apps for i0S, Android, macOS, and Windows. Buy keypad KeyPad.

Functional elements

Armed mode indicator
Disarmed mode indicator
Night mode indicator
Malfunction indicator
The block of numerical buttons
“Clear” button
“Function” button
“Arm” button
“Disarm” button
“Night mode” button
Tamper button
On/Off button
QR code

To remove the SmartBracket panel, slide it down (a perforated part is required for actuating the tamper in case of any attempt to tear off the device from the surface).

Operating Principle

KeyPad is a stationary control device located indoors. Its functions include arming/disarming the system with a numerical combination (or just by pressing the button), activating Night Mode, indicating the security mode, blocking when someone tries to guess the passcode and raising the silent alarm when someone forces the user to disarm the system.
KeyPad indicates the state of communication with the hub and system malfunctions. Buttons are highlighted once the user touches the keyboard so you can enter the passcode without external lighting. KeyPad also uses a beeper sound for indication.
To activate KeyPad, touch the keyboard: the backlight will switch on, and the beeper sound will indicate that KeyPad has woken up.
If the battery is low, the backlight switches on at a minimum level, regardless of the settings.
If you do not touch the keyboard for 4 seconds, KeyPad dims the backlight, and after another 12 seconds, the device switches to the sleep mode.
When switching to sleep mode, KeyPad clears the entered commands.

KeyPad supports passcodes of 4-6 digits. The entered passcode is sent to the hub after pressing the button: (arm) ,(disarm), or (Night mode). Incorrect commands can be reset with the C button (Reset).

When incorrect passcode is entered three times during 30 minutes, KeyPad locks for the time preset by the administrator user. Once KeyPad is locked, the hub ignores any commands, simultaneously notifying the security system users of the attempt to guess the passcode. The administrator user can unlock KeyPad in the app. When the pre-set time is up, KeyPad unlocks automatically. KeyPad allows arming the system without a passcode: by pressing the button (Arm). This feature is disabled by default. When the function button ) is pressed without entering the passcode, the hub executes the command assigned to this button in the app. KeyPad can notify a security company of the system being disarmed by force. The

Duress Cod : unlike the panic button — does not activate sirens. KeyPad and the app notify of the successful disarming of the system, but the security company receives an alarm.

Indication

When touching KeyPad, it wakes up highlighting the keyboard and indicating the security mode: Armed, Disarmed, or Night Mode. The security mode is always actual, regardless of the control device that was used to change it (the key fob or app).

Event	Indication

Malfunction indicator X blinks

| Indicator notifies about lack of communication with hub or keypad lid opening. You can check the reason for malfunction in the Ajax Security

System app

KeyPad button pressed

| A short beep, the system’s current arming state LED blinks once

The system is armed

| Short sound signal, Armed mode / Night mode LED indicator lights up

The system is disarmed

| Two short sound signals, LED disarmed LED indicator lights up
Incorrect passcode| Long sound signal, the keyboard backlight blinks
| 3 times
---|---
A malfunction is detected when arming (e.g., the detector is lost)| A long beep, the system’s current arming state LED blinks 3 times
The hub does not respond to the command — no connection| Long sound signal, the malfunction indicator lights up
KeyPad is locked after 3 unsuccessful attempts to enter the passcode| Long sound signal, security mode indicators blink simultaneously

Low battery

| After arming/disarming the system, the malfunction indicator blinks smoothly. The keyboard is locked while the indicator blinks.

When activating KeyPad with low batteries, it will beep with a long sound signal, the malfunction indicator smoothly lights up and then switches off

Connecting

Before connecting the device: Switch on the hub and check its Internet connection (the logo glows white or green).
Install the Ajax app. Create the account, add the hub to the app, and create at least one room. Ajax app
Make sure that the hub is not armed, and does not update by checking its status in the Ajax app.

Only users with administrator rights can add a device to the app

How to connect KeyPad to the hub

Select the Add Device option in the Ajax app
Name the device, scan/write manually the QR Code (located on the body and packaging), and select the location room.
Select Add — the countdown will begin.
Switch on KeyPad by holding power button for 3 seconds — it will blink once with the keyboard backlight.

For detection and pairing to occur, KeyPad should be located within the coverage of the wireless network of the hub (at the same protected object)] A request for connection to the hub is transmitted for a short time at the moment of switching on the device. If KeyPad failed to connect to the hub, switch it off for 5 seconds and retry. The connected device will appear in the app device list. Update of the device statuses in the list depends on the detector ping interval in the hub settings (the default value is 36 seconds).

There are no pre-set passwords for KeyPad. Before using a KeyPad, set all necessar passwords: common, personal, and duress code if you are forced to disarm the system.

Selecting the Location

The location of the device depends on its remoteness from the hub, and obstacles hindering the radio signal transmission: walls, floors, large objects inside the room.
The device developed only for indoor use.

Do not install KeyPad

Near the radio transmission equipment, including that operates in 2G/3G/4G mobile networks, Wi-Fi routers, transceivers, radio stations, as well as an Ajax hub (it uses a GSM network).
Close to electrical wiring.
Close to metal objects and mirrors that can cause radio signal attenuation or shading.
Outside the premises (outdoors).
Inside premises with the temperature and humidity beyond the range o permissible limits.
Closer than 1 m to the hub.

Check the Jeweller signal strength at the installation location.

During testing, the signal level is displayed in the app and on the keyboard with security mode indicators (Armed mode), (Disarmed mode), (Night mode) and malfunction indicator X.

If the signal level is low (one bar), we cannot guarantee the stable operation of the device. Take all possible measures to improve the quality of the signal. At least, move the device: even a 20 cm shift can significantly improve the quality of signal reception.

If the device has low or unstable signal strength even after moving, use a ReX radio signal range extender.
KeyPad is designed for operation when fixed to the vertical surface. When using KeyPad in hands, we cannot guarantee the successful operation of the sensor keyboard.

States

Devices
KeyPad

AJAX -AJ-KEYPAD -KeyPad-FIG-45

Settings

Devices
KeyPad
Settings

AJAX -AJ-KEYPAD -KeyPad-FIG-5

AJAX -AJ-KEYPAD -KeyPad-FIG-6

AJAX -AJ-KEYPAD -KeyPad-FIG-7

KeyPad allows to set both general and personal passcodes for each user.

To install a personal passcode

Go to profile settings (Hub → Settings → Users → Your profile settings)
Click Access Code Settings (in this menu you can also see the user identifier)
Set the User Code and Duress Code.

Each user sets a personal passcode individually!

Security management by passwords

You can control the security of the entire facility or separate groups using common or personal passwords (configured in the app).
If a personal password is used, the name of the user who armed/disarmed the system is displayed in notifications and in the hub event feed. If a common password is used, the name of the user who changed the security mode is no displayed.

Security management of the entire facility using a common password

Enter the common password and press the arming /disarming / Night mod activation .
For example 1234 .

Group security management with a common password

Enter the common password, press the *, enter the group ID and press the arming /disarming / Night mode activation .
For example: 1234 → * → 2 → .

What is Group ID?

If a group is assigned to the KeyPad (Arming / Disarming permission field in the keypad settings), you do not need to enter the group ID. To manage the arming mode of this group, erntering a common or personal password is sufficient. Please note that if a group is assigned to the KeyPad, you will not be able to\ manage Night mode using a common password. In this case, Night mode can only be managed using a personal password (if the user has the appropriate rights).

Rights in the Ajax security system

Security management of the entire facility using a persona password

Enter user ID, press *, enter a personal password, and press the arming /disarming / Night mode activation.
For example 2 → * → 1234 →

What is User ID?

Group security management using a personal password

Enter user ID, press , enter a personal password, press , enter group ID, and press the arming /disarming / Night mode activation.
For example: 2 → → 1234 → → 5 →

What is Group ID?

What is User ID?

If a group is assigned to the KeyPad (Arming / Disarming permission field in the keypad settings), you do not need to enter the group ID. To manage the arming mode of this group, entering a personal password is sufficient.

Using a duress password

A duress password allows you to raise a silent alarm and imitate alarm deactivation. A silent alarm means that the Ajax app and sirens will not shout and] expose you. But a security company and other users will be alerted instantly. You can use both personal and common duress password.

What is a duress password and how do you use it?

Scenarios and sirens react to disarming under duress in the same way as to normal disarming.

To use a common duress password:

Enter the common duress password and press the disarming key .
For example 4321 →

To use a personal duress password:

Enter user ID, press *, then enter personal duress password and press the disarming key .
For example: 2 → * → 4422 →

How the fire alarm muting function works

Using the KeyPad, you can mute the interconnected fire detectors alarm b pressing the Function button (if the corresponding setting is enabled). The reaction of the system to pressing a button depends on the state of the system:

Interconnected FireProtect Alarms have already propagated — by the first press of the Function button, all sirens of the fire detectors are muted, except for those that registered the alarm. Pressing the button again mutes the remaining detectors.
The interconnected alarms delay time lasts — by pressing the Function button, the siren of the triggered FireProtect/FireProtect Plus detector is muted.

Learn more about interconnected alarms of fire detectors

With the OS Malevich 2.12 update, users can mute fire alarms in their groups without affecting detectors in the groups to which they do not have access.

Functionality Testing

The Ajax security system allows conducting tests for checking the functionality of connected devices.
The tests do not start straight away but within a period of 36 seconds when usinthe standard settings. The test time start depends on the settings of the detector scanning period (the paragraph on “Jeweller” settings in hub settings).

Jeweller Signal Strength Test

Attenuation Test

Installation

Before installing the detector, make sure that you have selected the optimal location and it is in compliance with the guidelines contained in this manual!
KeyPad should be attached to the vertical surface.

Attach the SmartBracket panel to the surface using bundled screws, using atleast two fixing points (one of them — above the tamper). After selecting othe attachment hardware, make sure that they do not damage or deform the panel.

The double-sided adhesive tape may be only used for temporary attachment of KeyPad. The tape will run dry in course of time, which may result in the falling of the KeyPad and damage of the device.

Put KeyPad on the attachment panel and tighten the mounting screw on the body underside.

As soon as the KeyPad is fixed in SmartBracket, it will blink with the LED X (Fault) this will be a signal that the tamper has been actuated.
If the malfunction indicator X did not blink after installation in SmartBracket, check]the status of the tamper in the Ajax app and then check the fixing tightness of the panel.
If the KeyPad is torn off from the surface or removed from the attachment panel, you will receive the notification.

KeyPad Maintenance and Battery Replacement

Check the KeyPad operating capability on a regular basis The battery installed in the KeyPad ensures up to 2 years of autonomous operation\ (with the inquiry frequency by the hub of 3 minutes). If the KeyPad battery is low, the security system will send the relevant notices, and the malfunction indicator will smoothly lights up and goes out after each successful passcode entry.

How long Ajax devices operate on batteries, and what affects this Battery Replacement

Complete Set

KeyPad
SmartBracket mounting panel
Batteries AAA (pre-installed) — 4 pcs
Installation kit
Quick Start Guide5. Quick Start Guide

Technical Specifications

CC	Capacitive
Anti-tamper switch	Yes
Protection against passcode guessing	Yes

Frequency band

| 868.0 – 868.6 MHz or 868.7 – 869.2 MHz

depending on the region of sale

Compatibility

| Operates only with all Ajax hubs , and range extenders
Maximum RF output power| Up to 20 mW
Modulation of the radio signal| GFSK

Radio signal range

| Up to 1,700 m (if there are no obstacles)

Learn more

Warranty

Warranty for the “AJAX SYSTEMS MANUFACTURING” LIMITED LIABILITY COMPANY products is valid for 2 years after the purchase and does not apply to the pre-installed battery.
If the device does not work correctly, you should first contact the support service — in half of the cases, technical issues can be solved remotely!